From: Shan Shaji <s.shaji@proxmox.com>
To: pbs-devel@lists.proxmox.com
Subject: [RFC PATCH proxmox-backup 1/6] refactor: rename `ReuseStats` struct to `PxarArchiverProgressStats`
Date: Wed, 10 Jun 2026 20:02:03 +0200 [thread overview]
Message-ID: <20260610180208.801614-2-s.shaji@proxmox.com> (raw)
In-Reply-To: <20260610180208.801614-1-s.shaji@proxmox.com>
Earlier, the `ReuseStats` struct was used to count and show summary for
metadata mode. Since, the same counter will be used to show stats for
both legacy and data mode, rename `ReuseStats` struct to
`PxarArchiverProgressStats` and its corresponding propery inside the
archiver to `progress_stats`.
Signed-off-by: Shan Shaji <s.shaji@proxmox.com>
---
pbs-client/src/pxar/create.rs | 46 +++++++++++++++++------------------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/pbs-client/src/pxar/create.rs b/pbs-client/src/pxar/create.rs
index 304de4d83..c7f26879e 100644
--- a/pbs-client/src/pxar/create.rs
+++ b/pbs-client/src/pxar/create.rs
@@ -150,7 +150,7 @@ pub(crate) struct HardLinkInfo {
}
#[derive(Default)]
-struct ReuseStats {
+struct PxarArchiverProgressStats {
files_reused_count: u64,
files_hardlink_count: u64,
files_reencoded_count: u64,
@@ -193,7 +193,7 @@ struct Archiver {
// an older client without the encode-time check is detected here and the affected file is
// re-encoded instead of reused.
last_reusable_offset: Option<u64>,
- reuse_stats: ReuseStats,
+ progress_stats: PxarArchiverProgressStats,
split_archive: bool,
}
@@ -304,7 +304,7 @@ where
previous_payload_index,
cache: PxarLookaheadCache::new(options.max_cache_size),
last_reusable_offset: None,
- reuse_stats: ReuseStats::default(),
+ progress_stats: PxarArchiverProgressStats::default(),
split_archive,
};
@@ -325,28 +325,28 @@ where
info!("Change detection summary:");
info!(
" - {} total files ({} hardlinks)",
- archiver.reuse_stats.files_reused_count
- + archiver.reuse_stats.files_reencoded_count
- + archiver.reuse_stats.files_hardlink_count,
- archiver.reuse_stats.files_hardlink_count,
+ archiver.progress_stats.files_reused_count
+ + archiver.progress_stats.files_reencoded_count
+ + archiver.progress_stats.files_hardlink_count,
+ archiver.progress_stats.files_hardlink_count,
);
info!(
" - {} unchanged, reusable files with {} data",
- archiver.reuse_stats.files_reused_count,
- HumanByte::from(archiver.reuse_stats.total_reused_payload_size),
+ archiver.progress_stats.files_reused_count,
+ HumanByte::from(archiver.progress_stats.total_reused_payload_size),
);
info!(
" - {} changed or non-reusable files with {} data",
- archiver.reuse_stats.files_reencoded_count,
- HumanByte::from(archiver.reuse_stats.total_reencoded_size),
+ archiver.progress_stats.files_reencoded_count,
+ HumanByte::from(archiver.progress_stats.total_reencoded_size),
);
info!(
" - {} padding in {} partially reused chunks",
HumanByte::from(
- archiver.reuse_stats.total_injected_size
- - archiver.reuse_stats.total_reused_payload_size
+ archiver.progress_stats.total_injected_size
+ - archiver.progress_stats.total_reused_payload_size
),
- archiver.reuse_stats.partial_chunks_count,
+ archiver.progress_stats.partial_chunks_count,
);
}
Ok(())
@@ -971,24 +971,24 @@ impl Archiver {
}
let offset: LinkOffset = if let Some(payload_offset) = payload_offset {
- self.reuse_stats.total_reused_payload_size +=
+ self.progress_stats.total_reused_payload_size +=
file_size + size_of::<pxar::format::Header>() as u64;
- self.reuse_stats.files_reused_count += 1;
+ self.progress_stats.files_reused_count += 1;
encoder
.add_payload_ref(metadata, file_name, file_size, payload_offset)
.await?
} else {
- self.reuse_stats.total_reencoded_size +=
+ self.progress_stats.total_reencoded_size +=
file_size + size_of::<pxar::format::Header>() as u64;
- self.reuse_stats.files_reencoded_count += 1;
+ self.progress_stats.files_reencoded_count += 1;
self.add_regular_file(encoder, fd, file_name, metadata, file_size)
.await?
};
if stat.st_nlink > 1 {
- self.reuse_stats.files_hardlink_count += 1;
+ self.progress_stats.files_hardlink_count += 1;
self.hardlinks
.insert(link_info, (self.path.clone(), offset));
}
@@ -1215,11 +1215,11 @@ impl Archiver {
HumanByte::from(chunk.padding),
HumanByte::from(chunk.size()),
);
- self.reuse_stats.total_injected_size += chunk.size();
- self.reuse_stats.total_injected_count += 1;
+ self.progress_stats.total_injected_size += chunk.size();
+ self.progress_stats.total_injected_count += 1;
if chunk.padding > 0 {
- self.reuse_stats.partial_chunks_count += 1;
+ self.progress_stats.partial_chunks_count += 1;
}
size = size.add(chunk.size());
@@ -2075,7 +2075,7 @@ mod tests {
suggested_boundaries: Some(suggested_boundaries),
cache: PxarLookaheadCache::new(None),
last_reusable_offset: None,
- reuse_stats: ReuseStats::default(),
+ progress_stats: PxarArchiverProgressStats::default(),
split_archive: true,
};
--
2.47.3
next prev parent reply other threads:[~2026-06-10 18:02 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-10 18:02 [RFC PATCH proxmox-backup 0/6] fix #7024: client: add file statistics inside logs Shan Shaji
2026-06-10 18:02 ` Shan Shaji [this message]
2026-06-10 18:02 ` [RFC PATCH proxmox-backup 2/6] fix #7024: pxar: show archiver summary for legacy and data mode Shan Shaji
2026-06-10 18:02 ` [RFC PATCH proxmox-backup 3/6] refactor: use atomic values in `PxarArchiverProgressStats` Shan Shaji
2026-06-10 18:02 ` [RFC PATCH proxmox-backup 4/6] fix #7024: cli: show number of processed files during backup Shan Shaji
2026-06-10 18:02 ` [RFC PATCH proxmox-backup 5/6] refactor: rename `UploadCounters` to `UploadProgress` Shan Shaji
2026-06-10 18:02 ` [RFC PATCH proxmox-backup 6/6] fix #7024: cli: add option to enable verbose logs Shan Shaji
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260610180208.801614-2-s.shaji@proxmox.com \
--to=s.shaji@proxmox.com \
--cc=pbs-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox