[pbs-devel] [PATCH v5 pxar proxmox-backup 00/62] fix #3174: improve file-level backup

[Christian Ebner <c.ebner@proxmox.com>]

This series of patches implements an metadata based file change
detection mechanism for improved pxar file level backup creation speed
for unchanged files.

The chosen approach is to split pxar archives on creation via the
proxmox-backup-client into two separate data and upload streams,
one exclusive for regular file payloads, the other one for the rest
of the pxar archive, which is mostly metadata.

On consecutive runs, the metadata archive of the previous backup run,
which is limited in size and therefore rapidly accessed is used to
lookup and compare the metadata for entries to encode.
This assumes that the connection speed to the Proxmox Backup Server is
sufficiently fast, allowing the download and chaching of the chunks for
that index.

Changes to regular files are detected by comparing all of the files
metadata object, including mtime, acls, ecc. If no changes are detected,
the previous payload index is used to lookup chunks to possibly re-use
in the payload stream of the new archive.
In order to reduce possible chunk fragmentation, the decision whether to
reuse or reencode a file payload is deferred until enough information
is gathered by adding entries to a look-ahead cache. If the padding
introduced by reusing chunks falls below a threshold, the entries are
referenced, the chunks are reused and injected into the pxar payload
upload stream, otherwise they are discated and the files encoded
regularly.

Patches 13 and 14 are to be applied to the pxar repository only after
patch 49 in the series, for the patches to compile in a sequential
chain.

The following lists the most notable changes included in this series since
the version 4:
- Increase open file handle limit to hard limit and adapt lookahead
  cache size dynamically (thanks a lot to Thomas for pointing this out
  and providing the necessary background information). This helps with
  the reuse of multiple entries being contained within the same chunk,
  otherwise exceeding padding threshold and being therefore reencoded
  instead.
- Fix payload chunker scan to only scan up until chunk pos in case a
  suggested boundary is chosen.
- Fix issue with decoder state being not set to correct `InDirectory`
  after reading prelude and getting root directory entry.
- Fix issue with kept back chunk injection when the chunk follows a
  range discontinuity.
- Add regression test for pxar create with metadata archive and payload
  index reference.

The following lists the most notable changes included in this series since
the version 3:
- Rework the whole reused chunk injection and accounting logic and use
  lockless async `mpsc::channel`s instead of `Arc<Mutex<VecDeque<..>>>`.
- Reworked lookahead caching logic to use payload ranges and check for
  possible range continuation instead of looking up the reusable dynamic
  entries immediately in case of a reusable entry chain. This also
  avoids edge cases not covered in the previous version of the patch series.
  This current version therefore tends to reencode small files more
  aggressively, since they might introduce additional unwanted paddings.
- Correctly cover also hardlinks for the reuse logic, avoiding to
  reencode these entries.
- Add additional dedicatet chunker implementation for payload data
  stream, allowing the archiver to suggest boundaries to the chunker to
  reduce padding for reused chunks.
- Add additional `change-detection-mode=data`, in order to allow
  creating split archives with fully reencoded payload data.
- Add additional payload input readers for pxar accessor type
  implementations where needed.
- Add additional consistency check in pxar encoder when dropping state
  or encoder instance.
- CliParams was renamed to the more opaque Prelude, since the pxar
  archive does not care about its contents and this might be extended to
  store other information about the archive as well.
- Add missing proxmox-file-restore for split archives and fix restore of
  tar/zip archives via WebUI. This is handled by the same decoder logic,
  and needed an updated payload input content range to read the data
  from the correct location in the payload data archive.
- Additional refactoring to use the pxar reader helpers where possible.

The following lists the most notable changes included in this series since
the version 2:
- many bugfixes regarding incorrect archive encoding by wrong offset
  generation, adding additional sanity checks and rather fail on
  encoding than produce an incorrectly encoded archive
- different approach for deciding whether to reuse or reencode the
  entries. Previously, the entries have been encoded when a cached
  payload size threshold was reached. Now, the padding introduced by
  reusable chunks is tracked, and only if the padding does not exceed
  the set threshold, the entries are reused. This reduces the possible
  padding, at the cost of reencoding more entries. Also avoids to
  re-use chunks which have now large padding holes because of
  moved/removed files contained within.
- added headers for metadata archive and payload file
- added documentation

An invocation of a backup run with this patches now is:
```bash
proxmox-backup-client backup <label>.pxar:<source-path> --change-detection-mode=metadata
```
During the first run, no reference index is available, the pxar archive
will however be split into the two parts.
Following backups will however utilize the pxar archive accessor and
index files of the previous run to perform file change detection.

As benchmarks, the linux source code as well as the coco dataset for
computer vision and pattern recognition can be used.
The benchmarks can be performed by running:
```bash
proxmox-backup-test-suite detection-mode-bench prepare --target /<path-to-bench-source-target>
proxmox-backup-test-suite detection-mode-bench run linux.pxar:/<path-to-bench-source-target>/linux
proxmox-backup-test-suite detection-mode-bench run coco.pxar:/<path-to-bench-source-target>/coco
```

Above command invocations assume the default repository and credentials
to be set as environment variables, they might however be passed as
additional optional parameters instead.

pxar:

Christian Ebner (14):
  format/examples: add header type `PXAR_PAYLOAD_REF`
  decoder: add method to read payload references
  decoder: factor out skip part from skip_entry
  encoder: add optional output writer for file payloads
  encoder: move to stack based state tracking
  decoder/accessor: add optional payload input stream
  decoder: set payload input range when decoding via accessor
  encoder: add payload reference capability
  encoder: add payload position capability
  encoder: add payload advance capability
  encoder/format: finish payload stream with marker
  format: add payload stream start marker
  format/encoder/decoder: new pxar entry type `Version`
  format/encoder/decoder: new pxar entry type `Prelude`

 examples/apxar.rs            |   2 +-
 examples/mk-format-hashes.rs |  21 ++
 examples/pxarcmd.rs          |   7 +-
 src/accessor/aio.rs          |  10 +-
 src/accessor/mod.rs          | 116 +++++++-
 src/accessor/sync.rs         |   8 +-
 src/decoder/aio.rs           |  14 +-
 src/decoder/mod.rs           | 212 +++++++++++++--
 src/decoder/sync.rs          |  15 +-
 src/encoder/aio.rs           |  87 ++++--
 src/encoder/mod.rs           | 497 ++++++++++++++++++++++++++---------
 src/encoder/sync.rs          |  67 ++++-
 src/format/mod.rs            |  63 +++++
 src/lib.rs                   |   9 +
 tests/compat.rs              |   3 +-
 tests/simple/fs.rs           |   8 +-
 tests/simple/main.rs         |   8 +-
 17 files changed, 935 insertions(+), 212 deletions(-)

proxmox-backup:

Christian Ebner (48):
  client: pxar: switch to stack based encoder state
  client: backup: factor out extension from backup target
  client: pxar: combine writers into struct
  client: pxar: add optional pxar payload writer instance
  client: pxar: optionally split metadata and payload streams
  client: helper: add helpers for creating reader instances
  client: helper: add method for split archive name mapping
  client: restore: read payload from dedicated index
  tools: cover extension for split pxar archives
  restore: cover extension for split pxar archives
  client: mount: make split pxar archives mountable
  api: datastore: refactor getting local chunk reader
  api: datastore: attach optional payload chunk reader
  catalog: shell: make split pxar archives accessible
  www: cover metadata extension for pxar archives
  file restore: factor out getting pxar reader
  file restore: cover split metadata and payload archives
  file restore: show more error context when extraction fails
  pxar: add optional payload input for achive restore
  pxar: add more context to extraction error
  client: pxar: include payload offset in entry listing
  pxar: show padding in debug output on archive list
  datastore: dynamic index: add method to get digest
  client: pxar: helper for lookup of reusable dynamic entries
  upload stream: implement reused chunk injector
  client: chunk stream: add struct to hold injection state
  client: streams: add channels for dynamic entry injection
  specs: add backup detection mode specification
  client: implement prepare reference method
  client: pxar: add method for metadata comparison
  pxar: caching: add look-ahead cache types
  fix #3174: client: pxar: enable caching and meta comparison
  client: backup writer: add injected chunk count to stats
  pxar: create: keep track of reused chunks and files
  pxar: create: show chunk injection stats debug output
  client: pxar: add helper to handle optional preludes
  client: pxar: opt encode cli exclude patterns as Prelude
  docs: file formats: describe split pxar archive file layout
  docs: add section describing change detection mode
  test-suite: add detection mode change benchmark
  test-suite: add bin to deb, add shell completions
  datastore: chunker: add Chunker trait
  datastore: chunker: implement chunker for payload stream
  client: chunk stream: switch payload stream chunker
  client: pxar: allow to restore prelude to optional path
  client: pxar: add archive creation with reference test
  client: tools: add helper to raise nofile rlimit
  client: pxar: set cache limit based on nofile rlimit

 Cargo.toml                                    |    1 +
 Makefile                                      |   13 +-
 debian/proxmox-backup-client.bash-completion  |    1 +
 debian/proxmox-backup-client.install          |    2 +
 debian/proxmox-backup-test-suite.bc           |    8 +
 docs/backup-client.rst                        |   41 +
 docs/file-formats.rst                         |   46 +
 docs/meta-format-overview.dot                 |   50 +
 examples/test_chunk_size.rs                   |    9 +-
 examples/test_chunk_speed.rs                  |    7 +-
 examples/test_chunk_speed2.rs                 |    2 +-
 pbs-client/src/backup_specification.rs        |   44 +
 pbs-client/src/backup_writer.rs               |  120 +-
 pbs-client/src/chunk_stream.rs                |  122 +-
 pbs-client/src/inject_reused_chunks.rs        |  129 +++
 pbs-client/src/lib.rs                         |    3 +-
 pbs-client/src/pxar/create.rs                 | 1004 ++++++++++++++++-
 pbs-client/src/pxar/extract.rs                |   31 +-
 pbs-client/src/pxar/look_ahead_cache.rs       |   38 +
 pbs-client/src/pxar/mod.rs                    |    5 +-
 pbs-client/src/pxar/tools.rs                  |  123 +-
 pbs-client/src/pxar_backup_stream.rs          |   68 +-
 pbs-client/src/tools/mod.rs                   |   55 +-
 pbs-datastore/src/chunker.rs                  |  161 ++-
 pbs-datastore/src/dynamic_index.rs            |   14 +-
 pbs-datastore/src/lib.rs                      |    2 +-
 pbs-pxar-fuse/src/lib.rs                      |    2 +-
 proxmox-backup-client/src/catalog.rs          |   30 +-
 proxmox-backup-client/src/helper.rs           |   96 ++
 proxmox-backup-client/src/main.rs             |  284 ++++-
 proxmox-backup-client/src/mount.rs            |   34 +-
 proxmox-backup-test-suite/Cargo.toml          |   18 +
 .../src/detection_mode_bench.rs               |  294 +++++
 proxmox-backup-test-suite/src/main.rs         |   17 +
 proxmox-file-restore/src/main.rs              |   80 +-
 .../src/proxmox_restore_daemon/api.rs         |   18 +-
 pxar-bin/src/main.rs                          |   61 +-
 src/api2/admin/datastore.rs                   |   47 +-
 src/api2/tape/restore.rs                      |   21 +-
 src/bin/proxmox_backup_debug/diff.rs          |    2 +-
 src/tape/file_formats/snapshot_archive.rs     |    9 +-
 tests/catar.rs                                |    5 +-
 tests/pxar/backup-client-pxar-data.mpxar      |  Bin 0 -> 15070 bytes
 tests/pxar/backup-client-pxar-data.ppxar.didx |  Bin 0 -> 8096 bytes
 tests/pxar/backup-client-pxar-expected.mpxar  |  Bin 0 -> 15086 bytes
 www/datastore/Content.js                      |    6 +-
 zsh-completions/_proxmox-backup-test-suite    |   13 +
 47 files changed, 2802 insertions(+), 334 deletions(-)
 create mode 100644 debian/proxmox-backup-test-suite.bc
 create mode 100644 docs/meta-format-overview.dot
 create mode 100644 pbs-client/src/inject_reused_chunks.rs
 create mode 100644 pbs-client/src/pxar/look_ahead_cache.rs
 create mode 100644 proxmox-backup-client/src/helper.rs
 create mode 100644 proxmox-backup-test-suite/Cargo.toml
 create mode 100644 proxmox-backup-test-suite/src/detection_mode_bench.rs
 create mode 100644 proxmox-backup-test-suite/src/main.rs
 create mode 100644 tests/pxar/backup-client-pxar-data.mpxar
 create mode 100644 tests/pxar/backup-client-pxar-data.ppxar.didx
 create mode 100644 tests/pxar/backup-client-pxar-expected.mpxar
 create mode 100644 zsh-completions/_proxmox-backup-test-suite

-- 
2.39.2



_______________________________________________
pbs-devel mailing list
pbs-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pbs-devel