[pbs-devel] [proxmox-backup] docs: replace concrete device paths with pseudo paths homogeneous through the documentation

[pbs-devel] [proxmox-backup] docs: replace concrete device paths with pseudo paths homogeneous through the documentation

[Philipp Hufnagl]

Having commonly used device paths (like /dev/sdb) in an example
command may cause damage if the user simply copies them without
checking. With a pseudo device path (like /dev/sdX), they would
simply get an error

Signed-off-by: Philipp Hufnagl <p.hufnagl@proxmox.com>
---
 docs/storage.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/docs/storage.rst b/docs/storage.rst
index f473adbe..60cf268e 100644
--- a/docs/storage.rst
+++ b/docs/storage.rst
@@ -48,12 +48,12 @@ You can create an ``ext4`` or ``xfs`` filesystem on a disk using ``fs
 create``, or by navigating to **Administration -> Storage/Disks -> Directory**
 in the web interface and creating one from there. The following command creates
 an ``ext4`` filesystem and passes the ``--add-datastore`` parameter, in order to
-automatically create a datastore on the disk (in this case ``sdd``). This will
+automatically create a datastore on the disk. This will
 create a datastore at the location ``/mnt/datastore/store1``:
 
 .. code-block:: console
 
-  # proxmox-backup-manager disk fs create store1 --disk sdd --filesystem ext4 --add-datastore true
+  # proxmox-backup-manager disk fs create store1 --disk sdX --filesystem ext4 --add-datastore true
 
 .. image:: images/screenshots/pbs-gui-disks-zfs-create.png
   :align: right
@@ -61,12 +61,12 @@ create a datastore at the location ``/mnt/datastore/store1``:
 
 You can also create a ``zpool`` with various raid levels from **Administration
 -> Storage/Disks -> ZFS** in the web interface, or by using ``zpool create``. The command
-below creates a mirrored ``zpool`` using two disks (``sdb`` & ``sdc``) and
+below creates a mirrored ``zpool`` using two disks and
 mounts it under ``/mnt/datastore/zpool1``:
 
 .. code-block:: console
 
-  # proxmox-backup-manager disk zpool create zpool1 --devices sdb,sdc --raidlevel mirror
+  # proxmox-backup-manager disk zpool create zpool1 --devices sdX,sdY --raidlevel mirror
 
 .. note:: You can also pass the ``--add-datastore`` parameter here, to automatically
   create a datastore from the disk.
-- 
2.39.2