* [PVE-User] mirrored ZFS boot with SATA SSD & NVMe PCIe SSD?
@ 2021-04-15 15:43 Lindsay Mathieson
[not found] ` <mailman.398.1618501949.359.pve-user@lists.proxmox.com>
0 siblings, 1 reply; 2+ messages in thread
From: Lindsay Mathieson @ 2021-04-15 15:43 UTC (permalink / raw)
To: pve-user
Setting up a home server (NUC i5) and it can only take a 2.5" SATA drive
and a NVMe PCIe SSD - but I would really like a mirrored ZFS boot.
Is it possible (and safe?) to use a 512GB SATA SSD and a 512GB NVMe PCi
SSD in a zfs boot mirror?
--
Lindsay
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PVE-User] mirrored ZFS boot with SATA SSD & NVMe PCIe SSD?
[not found] ` <mailman.398.1618501949.359.pve-user@lists.proxmox.com>
@ 2021-04-15 16:33 ` Lindsay Mathieson
0 siblings, 0 replies; 2+ messages in thread
From: Lindsay Mathieson @ 2021-04-15 16:33 UTC (permalink / raw)
To: pve-user
On 16/04/2021 1:51 am, Arjen via pve-user wrote:
> It should work fine but the write speeds (and fsync/sec) will typically be the slowest of the two.
Thanks, thought that would be the case.
> I use a NVME M.2 mirrored by two SATA drives for my VMs, which I think is quite similar.
> Older systems sometimes cannot boot from NVME (PCIe). You might want to make sure, otherwise the redundancy won't help if the SATA one fails.
Didn't know that, will check.
--
Lindsay
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-04-15 16:33 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-15 15:43 [PVE-User] mirrored ZFS boot with SATA SSD & NVMe PCIe SSD? Lindsay Mathieson
[not found] ` <mailman.398.1618501949.359.pve-user@lists.proxmox.com>
2021-04-15 16:33 ` Lindsay Mathieson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal