From: Thomas Lamprecht <t.lamprecht@proxmox.com>
To: Proxmox VE development discussion <pve-devel@lists.proxmox.com>,
Lorenz Stechauner <l.stechauner@proxmox.com>
Subject: Re: [pve-devel] [PATCH storage 1/2] pvesm: reformat cmd definitions
Date: Mon, 27 Sep 2021 14:36:43 +0200 [thread overview]
Message-ID: <cbfd8cb0-35c8-6896-b2b9-7e7ba61b6d2d@proxmox.com> (raw)
In-Reply-To: <20210927070917.1504165-1-l.stechauner@proxmox.com>
On 27.09.21 09:09, Lorenz Stechauner wrote:
> Signed-off-by: Lorenz Stechauner <l.stechauner@proxmox.com>
> ---
> PVE/CLI/pvesm.pm | 343 ++++++++++++++++++++++++++++++-----------------
> 1 file changed, 223 insertions(+), 120 deletions(-)
>
> diff --git a/PVE/CLI/pvesm.pm b/PVE/CLI/pvesm.pm
> index 190de91..7afbe22 100755
> --- a/PVE/CLI/pvesm.pm
> +++ b/PVE/CLI/pvesm.pm
> @@ -574,76 +574,143 @@ my $print_api_result = sub {
> };
>
> our $cmddef = {
> - add => [ "PVE::API2::Storage::Config", 'create', ['type', 'storage'] ],
above is <= 100 and even <= 80 cc, and we want to avoid line bloat in general,
as while overly long lines are not ideal, splitting basically on a per-word basis
isn't either.
It's totally fine in an hash/map definition to have some lines single ones and
some not.
> - set => [ "PVE::API2::Storage::Config", 'update', ['storage'] ],
same
> - remove => [ "PVE::API2::Storage::Config", 'delete', ['storage'] ],
same
> - status => [ "PVE::API2::Storage::Status", 'index', [],
same (but would need to use the <= 100 cc limit, which is fine here.
> - { node => $nodename }, $print_status ],
> - list => [ "PVE::API2::Storage::Content", 'index', ['storage'],
fwiw, we could have a `my $API = 'PVE::API2::Storage::';` before the cmddef and
use string interpolation, e.g.:
list => [ "${API}::Content", 'index', ['storage'], { node => $nodename }, $print_content ],
no hard feelings, but given that there's a lot of API module-path repetition and
it adds quite a bit to the line length it could be worth it..
> - { node => $nodename }, $print_content ],
> - alloc => [ "PVE::API2::Storage::Content", 'create', ['storage', 'vmid', 'filename', 'size'],
> - { node => $nodename }, sub {
> - my $volid = shift;
> - print "successfully created '$volid'\n";
> - }],
> - free => [ "PVE::API2::Storage::Content", 'delete', ['volume'],
> - { node => $nodename } ],
> + add => [
> + "PVE::API2::Storage::Config",
> + 'create',
> + ['type', 'storage'],
> + ],
> + set => [
> + "PVE::API2::Storage::Config",
> + 'update',
> + ['storage'],
> + ],
> + remove => [
> + "PVE::API2::Storage::Config",
> + 'delete',
> + ['storage'],
> + ],
> + status => [
> + "PVE::API2::Storage::Status",
> + 'index',
> + [],
> + { node => $nodename },
> + $print_status,
> + ],
> + list => [
> + "PVE::API2::Storage::Content",
> + 'index',
> + ['storage'],
> + { node => $nodename },
> + $print_content,
> + ],
> + alloc => [
> + "PVE::API2::Storage::Content",
> + 'create',
> + ['storage', 'vmid', 'filename', 'size'],
> + { node => $nodename },
> + sub {
> + my $volid = shift;
> + print "successfully created '$volid'\n";
> + },
> + ],
> + free => [
> + "PVE::API2::Storage::Content",
> + 'delete',
> + ['volume'],
> + { node => $nodename },
> + ],
> scan => {
> - nfs => [ "PVE::API2::Storage::Scan", 'nfsscan', ['server'], { node => $nodename }, sub {
> - my $res = shift;
> -
> - my $maxlen = 0;
> - foreach my $rec (@$res) {
> - my $len = length ($rec->{path});
> - $maxlen = $len if $len > $maxlen;
> - }
> - foreach my $rec (@$res) {
> - printf "%-${maxlen}s %s\n", $rec->{path}, $rec->{options};
> - }
> - }],
> - cifs => [ "PVE::API2::Storage::Scan", 'cifsscan', ['server'], { node => $nodename }, sub {
> - my $res = shift;
> -
> - my $maxlen = 0;
> - foreach my $rec (@$res) {
> - my $len = length ($rec->{share});
> - $maxlen = $len if $len > $maxlen;
> - }
> - foreach my $rec (@$res) {
> - printf "%-${maxlen}s %s\n", $rec->{share}, $rec->{description};
> - }
> - }],
> - glusterfs => [ "PVE::API2::Storage::Scan", 'glusterfsscan', ['server'], { node => $nodename }, sub {
> - my $res = shift;
> -
> - foreach my $rec (@$res) {
> - printf "%s\n", $rec->{volname};
> - }
> - }],
> - iscsi => [ "PVE::API2::Storage::Scan", 'iscsiscan', ['portal'], { node => $nodename }, sub {
> - my $res = shift;
> + nfs => [
> + "PVE::API2::Storage::Scan",
> + 'nfsscan',
> + ['server'],
> + { node => $nodename },
> + sub {
> + my $res = shift;
> +
> + my $maxlen = 0;
> + foreach my $rec (@$res) {
> + my $len = length ($rec->{path});
> + $maxlen = $len if $len > $maxlen;
> + }
> + foreach my $rec (@$res) {
> + printf "%-${maxlen}s %s\n", $rec->{path}, $rec->{options};
> + }
> + },
> + ],
> + cifs => [
> + "PVE::API2::Storage::Scan",
> + 'cifsscan',
> + ['server'],
> + { node => $nodename },
> + sub {
> + my $res = shift;
> +
> + my $maxlen = 0;
> + foreach my $rec (@$res) {
> + my $len = length ($rec->{share});
> + $maxlen = $len if $len > $maxlen;
> + }
> + foreach my $rec (@$res) {
> + printf "%-${maxlen}s %s\n", $rec->{share}, $rec->{description};
> + }
> + },
> + ],
> + glusterfs => [
> + "PVE::API2::Storage::Scan",
> + 'glusterfsscan',
> + ['server'],
> + { node => $nodename },
> + sub {
> + my $res = shift;
>
> - my $maxlen = 0;
> - foreach my $rec (@$res) {
> - my $len = length ($rec->{target});
> - $maxlen = $len if $len > $maxlen;
> - }
> - foreach my $rec (@$res) {
> - printf "%-${maxlen}s %s\n", $rec->{target}, $rec->{portal};
> - }
> - }],
> - lvm => [ "PVE::API2::Storage::Scan", 'lvmscan', [], { node => $nodename }, sub {
> - my $res = shift;
> - foreach my $rec (@$res) {
> - printf "$rec->{vg}\n";
> - }
> - }],
> - lvmthin => [ "PVE::API2::Storage::Scan", 'lvmthinscan', ['vg'], { node => $nodename }, sub {
> - my $res = shift;
> - foreach my $rec (@$res) {
> - printf "$rec->{lv}\n";
> - }
> - }],
> + foreach my $rec (@$res) {
> + printf "%s\n", $rec->{volname};
> + }
> + },
> + ],
> + iscsi => [
> + "PVE::API2::Storage::Scan",
> + 'iscsiscan',
> + ['portal'],
> + { node => $nodename },
> + sub {
> + my $res = shift;
> +
> + my $maxlen = 0;
> + foreach my $rec (@$res) {
> + my $len = length ($rec->{target});
> + $maxlen = $len if $len > $maxlen;
> + }
> + foreach my $rec (@$res) {
> + printf "%-${maxlen}s %s\n", $rec->{target}, $rec->{portal};
> + }
> + },
> + ],
> + lvm => [
> + "PVE::API2::Storage::Scan",
> + 'lvmscan',
> + [],
> + { node => $nodename },
> + sub {
> + my $res = shift;
> + foreach my $rec (@$res) {
> + printf "$rec->{vg}\n";
> + }
> + },
> + ],
> + lvmthin => [
> + "PVE::API2::Storage::Scan",
> + 'lvmthinscan',
> + ['vg'],
> + { node => $nodename },
> + sub {
> + my $res = shift;
> + foreach my $rec (@$res) {
> + printf "$rec->{lv}\n";
> + }
> + },
> + ],
> pbs => [
> "PVE::API2::Storage::Scan",
> 'pbsscan',
> @@ -652,13 +719,19 @@ our $cmddef = {
> $print_api_result,
> $PVE::RESTHandler::standard_output_options,
> ],
> - zfs => [ "PVE::API2::Storage::Scan", 'zfsscan', [], { node => $nodename }, sub {
> - my $res = shift;
> + zfs => [
> + "PVE::API2::Storage::Scan",
> + 'zfsscan',
> + [],
> + { node => $nodename },
> + sub {
> + my $res = shift;
>
> - foreach my $rec (@$res) {
> - printf "$rec->{pool}\n";
> - }
> - }],
> + foreach my $rec (@$res) {
> + printf "$rec->{pool}\n";
> + }
> + },
> + ],
> },
> nfsscan => { alias => 'scan nfs' },
> cifsscan => { alias => 'scan cifs' },
> @@ -667,55 +740,85 @@ our $cmddef = {
> lvmscan => { alias => 'scan lvm' },
> lvmthinscan => { alias => 'scan lvmthin' },
> zfsscan => { alias => 'scan zfs' },
> - path => [ __PACKAGE__, 'path', ['volume']],
> - extractconfig => [__PACKAGE__, 'extractconfig', ['volume']],
> - export => [ __PACKAGE__, 'export', ['volume', 'format', 'filename']],
> - import => [ __PACKAGE__, 'import', ['volume', 'format', 'filename'], {}, sub {
> - my $volid = shift;
> - print PVE::Storage::volume_imported_message($volid);
> - }],
> - apiinfo => [ __PACKAGE__, 'apiinfo', [], {}, sub {
> - my $res = shift;
> -
> - print "APIVER $res->{apiver}\n";
> - print "APIAGE $res->{apiage}\n";
> - }],
> - 'prune-backups' => [ __PACKAGE__, 'prunebackups', ['storage'], { node => $nodename }, sub {
> - my $res = shift;
> -
> - my ($dryrun, $list) = ($res->{dryrun}, $res->{list});
> -
> - return if !$dryrun;
> -
> - if (!scalar(@{$list})) {
> - print "No backups found\n";
> - return;
> - }
> + path => [
> + __PACKAGE__,
> + 'path',
> + ['volume'],
> + ],
> + extractconfig => [
> + __PACKAGE__,
> + 'extractconfig',
> + ['volume'],
> + ],
> + export => [
> + __PACKAGE__,
> + 'export',
> + ['volume', 'format', 'filename'],
> + ],
> + import => [
> + __PACKAGE__,
> + 'import',
> + ['volume', 'format', 'filename'],
> + {},
> + sub {
> + my $volid = shift;
> + print PVE::Storage::volume_imported_message($volid);
> + },
> + ],
> + apiinfo => [
> + __PACKAGE__,
> + 'apiinfo',
> + [],
> + {},
> + sub {
> + my $res = shift;
>
> - print "NOTE: this is only a preview and might not be what a subsequent\n" .
> - "prune call does if backups are removed/added in the meantime.\n\n";
> + print "APIVER $res->{apiver}\n";
> + print "APIAGE $res->{apiage}\n";
> + },
> + ],
> + 'prune-backups' => [
> + __PACKAGE__,
> + 'prunebackups',
> + ['storage'],
> + { node => $nodename },
> + sub {
> + my $res = shift;
>
> - my @sorted = sort {
> - my $vmcmp = PVE::Tools::safe_compare($a->{vmid}, $b->{vmid}, sub { $_[0] <=> $_[1] });
> - return $vmcmp if $vmcmp ne 0;
> - return $a->{ctime} <=> $b->{ctime};
> - } @{$list};
> + my ($dryrun, $list) = ($res->{dryrun}, $res->{list});
>
> - my $maxlen = 0;
> - foreach my $backup (@sorted) {
> - my $volid = $backup->{volid};
> - $maxlen = length($volid) if length($volid) > $maxlen;
> - }
> - $maxlen+=1;
> -
> - printf("%-${maxlen}s %15s %10s\n", 'Backup', 'Backup-ID', 'Prune-Mark');
> - foreach my $backup (@sorted) {
> - my $type = $backup->{type};
> - my $vmid = $backup->{vmid};
> - my $backup_id = defined($vmid) ? "$type/$vmid" : "$type";
> - printf("%-${maxlen}s %15s %10s\n", $backup->{volid}, $backup_id, $backup->{mark});
> - }
> - }],
> + return if !$dryrun;
> +
> + if (!scalar(@{$list})) {
> + print "No backups found\n";
> + return;
> + }
> +
> + print "NOTE: this is only a preview and might not be what a subsequent\n" .
> + "prune call does if backups are removed/added in the meantime.\n\n";
> +
> + my @sorted = sort {
> + my $vmcmp = PVE::Tools::safe_compare($a->{vmid}, $b->{vmid}, sub { $_[0] <=> $_[1] });
> + return $vmcmp if $vmcmp ne 0;
> + return $a->{ctime} <=> $b->{ctime};
> + } @{$list};
> +
> + my $maxlen = 0;
> + foreach my $backup (@sorted) {
> + my $volid = $backup->{volid};
> + $maxlen = length($volid) if length($volid) > $maxlen;
> + }
> + $maxlen+=1;
> +
> + printf("%-${maxlen}s %15s %10s\n", 'Backup', 'Backup-ID', 'Prune-Mark');
> + foreach my $backup (@sorted) {
> + my $type = $backup->{type};
> + my $vmid = $backup->{vmid};
> + my $backup_id = defined($vmid) ? "$type/$vmid" : "$type";
> + printf("%-${maxlen}s %15s %10s\n", $backup->{volid}, $backup_id, $backup->{mark});
> + }
> + },
> + ],
> };
>
> 1;
>
prev parent reply other threads:[~2021-09-27 12:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-27 7:09 Lorenz Stechauner
2021-09-27 7:09 ` [pve-devel] [PATCH storage 2/2] fix #3633: pvesm: use print_api_results Lorenz Stechauner
2021-09-27 12:36 ` Thomas Lamprecht [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cbfd8cb0-35c8-6896-b2b9-7e7ba61b6d2d@proxmox.com \
--to=t.lamprecht@proxmox.com \
--cc=l.stechauner@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.