From: Gabriel Goller <g.goller@proxmox.com>
To: Stefan Hanreich <s.hanreich@proxmox.com>
Cc: pve-devel@lists.proxmox.com
Subject: Re: [PATCH proxmox-ve-rs v3 08/32] sdn: support static routes in EVPN zone VRFs
Date: Thu, 19 Nov 2026 14:12:56 +0100 [thread overview]
Message-ID: <av71jt-RssYvkcz9@luna.proxmox.com> (raw)
In-Reply-To: <393d6979-8a84-4f81-83e1-c2a08518cfa3@proxmox.com>
On 18.11.2026 16:32, Stefan Hanreich wrote:
> what could be an interesting option: create static routes only on exit nodes
> as that'd have the use-case of creating routes to uplinks on exit nodes only,
> whereas all other nodes have the exit-nodes as default route.
Agree, as a default behavior this would probably be weird. To make this complete
we would probably have to make it so that the user can select the nodes on which
the static route will be installed, the selection would then be a subset of the
nodes where the simple zone is created.
IMO this is fine as a follow-up.
> On 11/16/26 5:12 PM, Gabriel Goller wrote:
> > Allow EVPN zones to reach networks behind appliances or external routers
> > using the same zone-wide static routes as simple zones. EVPN routes
> > always belong to vrf_<zone>, without requiring the dedicated-vrf option
> > used by simple zones.
> >
> > Generate routes on all nodes that belong to the zone, not just exit
> > nodes. This does not enable redistribution of static routes, so adding
> > a route does not by itself advertise it to other nodes.
> >
> > Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
> > ---
> > proxmox-ve-config/src/sdn/static_route.rs | 11 +++--
> > proxmox-ve-config/tests/static_routes/main.rs | 40 ++++++++++++++++++-
> > ...tatic_routes__evpn_zone_routes_to_frr.snap | 12 ++++++
> > 3 files changed, 56 insertions(+), 7 deletions(-)
> > create mode 100644 proxmox-ve-config/tests/static_routes/snapshots/static_routes__evpn_zone_routes_to_frr.snap
> >
> > diff --git a/proxmox-ve-config/src/sdn/static_route.rs b/proxmox-ve-config/src/sdn/static_route.rs
> > index eab6300374ff..0a5e0b3939f4 100644
> > --- a/proxmox-ve-config/src/sdn/static_route.rs
> > +++ b/proxmox-ve-config/src/sdn/static_route.rs
> > @@ -1,4 +1,4 @@
> > -//! Static routes stored as repeatable property strings in simple SDN zones.
> > +//! Static routes stored as repeatable property strings in Simple and EVPN SDN zones.
> >
> > use std::collections::BTreeMap;
> > use std::net::IpAddr;
> > @@ -22,7 +22,7 @@ use crate::sdn::fabric::section_config::interface::InterfaceName;
> > )]
> > #[derive(Clone, Debug, Serialize, Deserialize)]
> > #[serde(rename_all = "kebab-case", deny_unknown_fields)]
> > -/// A static route in a simple zone. The destination VRF is determined by the zone.
> > +/// A static route in a Simple or EVPN zone. The destination VRF is determined by the zone.
> > pub struct StaticRoute {
> > /// Destination prefix, including 0.0.0.0/0 or ::/0 for a default route.
> > pub prefix: Cidr,
> > @@ -119,8 +119,8 @@ impl ZoneRoutesConfig {
> > if config.route.is_empty() {
> > continue;
> > }
> > - if config.ty != "simple" {
> > - bail!("static routes are only supported in simple zones (zone '{zone}')");
> > + if !matches!(config.ty.as_str(), "simple" | "evpn") {
> > + bail!("static routes are only supported in Simple and EVPN zones (zone '{zone}')");
> > }
> > if config
> > .nodes
> > @@ -129,8 +129,7 @@ impl ZoneRoutesConfig {
> > {
> > continue;
> > }
> > - let destination_vrf = config
> > - .dedicated_vrf
> > + let destination_vrf = (config.ty == "evpn" || config.dedicated_vrf)
> > .then(|| FrrInterfaceName::try_from(format!("vrf_{zone}")))
> > .transpose()?;
> > for route in &config.route {
> > diff --git a/proxmox-ve-config/tests/static_routes/main.rs b/proxmox-ve-config/tests/static_routes/main.rs
> > index a0daf38449ff..f198a3bf3353 100644
> > --- a/proxmox-ve-config/tests/static_routes/main.rs
> > +++ b/proxmox-ve-config/tests/static_routes/main.rs
> > @@ -59,6 +59,44 @@ fn simple_zone_routes_to_frr() -> Result<(), Error> {
> > Ok(())
> > }
> >
> > +#[test]
> > +fn evpn_zone_routes_to_frr() -> Result<(), Error> {
> > + let zones: ZoneRoutesConfig = serde_json::from_value(json!({"ids": {
> > + "blue": {
> > + "type": "evpn",
> > + "nodes": {"pve1": 1, "pve2": 1},
> > + "exitnodes": {"pve1": 1},
> > + "route": [
> > + "prefix=0.0.0.0/0,via=10.10.0.2",
> > + "prefix=172.20.0.0/16,via=192.0.2.1,distance=200,nexthop-vrf=default",
> > + "prefix=::/0,via=fe80::1,iface=vnetblue",
> > + "prefix=198.51.100.0/24,iface=uplink0"
> > + ]
> > + },
> > + "disabled": {
> > + "type": "evpn",
> > + "nodes": {},
> > + "route": ["prefix=192.0.2.0/24,iface=unused0"]
> > + }
> > + }}))?;
> > + let config = FrrConfig {
> > + ip_routes: zones.routes_for_node("pve1")?,
> > + ..Default::default()
> > + };
> > + // EVPN always uses the zone VRF, without requiring the Simple-only dedicated-vrf flag.
> > + let output = dump(&config)?;
> > + insta::assert_snapshot!(output);
> > +
> > + // Routes apply to every zone node, not just exit nodes. FRR resolves local interfaces.
> > + let other = FrrConfig {
> > + ip_routes: zones.routes_for_node("pve2")?,
> > + ..Default::default()
> > + };
> > + assert_eq!(dump(&other)?, output);
> > + assert!(zones.routes_for_node("pve3")?.is_empty());
> > + Ok(())
> > +}
> > +
> > #[test]
> > fn validate_route_properties() {
> > for value in [
> > @@ -109,7 +147,7 @@ fn validate_route_properties() {
> >
> > #[test]
> > fn reject_routes_in_other_zone_types() -> Result<(), Error> {
> > - for ty in ["vlan", "qinq", "vxlan", "evpn", "faucet"] {
> > + for ty in ["vlan", "qinq", "vxlan", "faucet"] {
> > let zones: ZoneRoutesConfig = serde_json::from_value(json!({"ids": {
> > "zone1": {"type": ty, "route": ["prefix=0.0.0.0/0,via=192.0.2.1"]}
> > }}))?;
> > diff --git a/proxmox-ve-config/tests/static_routes/snapshots/static_routes__evpn_zone_routes_to_frr.snap b/proxmox-ve-config/tests/static_routes/snapshots/static_routes__evpn_zone_routes_to_frr.snap
> > new file mode 100644
> > index 000000000000..0301559a6d77
> > --- /dev/null
> > +++ b/proxmox-ve-config/tests/static_routes/snapshots/static_routes__evpn_zone_routes_to_frr.snap
> > @@ -0,0 +1,12 @@
> > +---
> > +source: proxmox-ve-config/tests/static_routes/main.rs
> > +expression: output
> > +---
> > +!
> > +ip route 0.0.0.0/0 10.10.0.2 vrf vrf_blue
> > +!
> > +ip route 172.20.0.0/16 192.0.2.1 200 nexthop-vrf default vrf vrf_blue
> > +!
> > +ipv6 route ::/0 fe80::1 vnetblue vrf vrf_blue
> > +!
> > +ip route 198.51.100.0/24 uplink0 vrf vrf_blue
>
>
>
>
>
next prev parent reply other threads:[~2026-11-19 13:13 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 16:11 [PATCH common/manager/network/proxmox{-ve-rs,-perl-rs,-widget-toolkit} v3 00/32] SDN VRF support Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-common v3 01/32] interfaces: preserve VRF membership across address family changes Gabriel Goller
2026-11-18 14:13 ` Stefan Hanreich
2026-11-18 15:41 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 02/32] frr: add VRF-aware OSPF rendering Gabriel Goller
2026-11-18 14:41 ` Stefan Hanreich
2026-11-18 16:21 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 03/32] sdn: add zone references to OSPF and BGP fabrics Gabriel Goller
2026-11-18 14:10 ` Stefan Hanreich
2026-11-18 16:55 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 04/32] sdn: generate fabric routing configuration in zone VRFs Gabriel Goller
2026-11-18 14:53 ` Stefan Hanreich
2026-11-18 17:26 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 05/32] sdn: fix VRF route-map scoping and zone ID validation Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 06/32] tests: fabrics: add test for fabrics in VRFs Gabriel Goller
2026-11-18 15:01 ` Stefan Hanreich
2026-11-18 17:33 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 07/32] sdn: allow static routes in simple zone VRFs Gabriel Goller
2026-11-18 15:29 ` Stefan Hanreich
2026-11-18 18:10 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 08/32] sdn: support static routes in EVPN " Gabriel Goller
2026-11-18 15:32 ` Stefan Hanreich
2026-11-19 13:12 ` Gabriel Goller [this message]
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 09/32] pve-rs: fabrics: assign network interfaces to configured VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 10/32] pve-rs: fabrics: make per-fabric status queries VRF-aware Gabriel Goller
2026-11-18 15:42 ` Stefan Hanreich
2026-11-19 13:30 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 11/32] pve-rs: fabrics: include VRF routes in aggregate status Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 12/32] pve-rs: fabrics: expose host interface membership Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 13/32] sdn: expose static routes for simple zone uplinks Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 14/32] sdn: evpn: add unreachable IPv6 default route to zone VRFs Gabriel Goller
2026-11-18 16:08 ` Stefan Hanreich
2026-11-18 16:39 ` Stefan Hanreich
2026-11-19 13:38 ` Gabriel Goller
2026-11-19 15:51 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 15/32] sdn: add optional VRFs for simple zones Gabriel Goller
2026-11-18 16:18 ` Stefan Hanreich
2026-11-19 13:44 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 16/32] sdn: allow fabrics to use simple zone VRFs Gabriel Goller
2026-11-18 16:27 ` Stefan Hanreich
2026-11-19 14:14 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 17/32] sdn: require underlay fabrics to use the default VRF Gabriel Goller
2026-11-18 16:30 ` Stefan Hanreich
2026-11-19 14:33 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 18/32] sdn: always generate EVPN zone VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 19/32] api: sdn: allow EVPN zones as fabric VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 20/32] api: sdn: disallow BGP fabrics in EVPN zone VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 21/32] sdn: simple: support static routes in zone routing tables Gabriel Goller
2026-11-18 16:49 ` Stefan Hanreich
2026-11-19 14:53 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 22/32] sdn: evpn: allow static routes Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 23/32] sdn: zones: SNAT via dedicated uplinks in zone VRFs Gabriel Goller
2026-11-18 18:07 ` Stefan Hanreich
2026-11-16 16:11 ` [PATCH pve-network v3 24/32] sdn: dhcp: only configure DHCP for zones on the local node Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 25/32] sdn: dhcp: run dnsmasq in the zone VRF Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-widget-toolkit v3 26/32] ui: network: allow selecting a VRF for host interfaces Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 27/32] ui: sdn: add VRF zone selection for fabrics Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 28/32] ui: sdn: expose EVPN zones as fabric VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 29/32] network: allow setting the VRF of host interfaces Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 30/32] ui: sdn: allow static routes for Simple zone VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 31/32] ui: sdn: allow static routes in EVPN zones Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 32/32] network: generate SDN DHCP config after ifreload Gabriel Goller
2026-11-18 18:27 ` [PATCH common/manager/network/proxmox{-ve-rs,-perl-rs,-widget-toolkit} v3 00/32] SDN VRF support Stefan Hanreich
2026-11-19 15:33 ` Gabriel Goller
2026-11-19 20:10 ` Gabriel Goller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=av71jt-RssYvkcz9@luna.proxmox.com \
--to=g.goller@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
--cc=s.hanreich@proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.