all lists on lists.proxmox.com
 help / color / mirror / Atom feed
From: Marco Gaiarin <gaio@lilliput.linux.it>
To: pve-user@lists.proxmox.com
Subject: Re: [PVE-User] OfflineUncorrectableSector, and now?!
Date: Mon, 28 Nov 2022 13:16:24 +0100	[thread overview]
Message-ID: <Y4SmmJFsc/BJ8IIy@sv.lnf.it> (raw)
In-Reply-To: <20221127164412.6c642299@macbookair>

Mandi! Yannick Palanque
  In chel di` si favelave...

> What is the full output of `smartctl -a /dev/sda`?

root@pspve2:~# smartctl -a /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.4.178-1-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HFS480G32FEH-BA10A
Serial Number:    ESABN5131I080BA2O
LU WWN Device Id: 5 ace42e 025406ebe
Add. Product Id:  DELL(tm)
Firmware Version: DD02
User Capacity:    480,103,981,056 bytes [480 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-4 (minor revision not indicated)
SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Nov 28 13:14:10 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  110) seconds.
Offline data collection
capabilities: 			 (0x19) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0002)	Does not save SMART data before
					entering power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  30) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000e   100   100   006    Old_age   Always       -       0
  5 Reallocated_Sector_Ct   0x0033   100   100   002    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       5763
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       22
 13 Read_Soft_Error_Rate    0x002e   100   100   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       34
175 Program_Fail_Count_Chip 0x0032   100   100   000    Old_age   Always       -       13
179 Used_Rsvd_Blk_Cnt_Tot   0x0033   100   100   002    Pre-fail  Always       -       0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0010   100   100   000    Old_age   Offline      -       1517
181 Program_Fail_Cnt_Total  0x0032   100   100   000    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   067   057   000    Old_age   Always       -       33 (Min/Max 16/43)
195 Hardware_ECC_Recovered  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       8
199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always       -       0
201 Unknown_SSD_Attribute   0x0033   100   100   050    Pre-fail  Always       -       0
202 Unknown_SSD_Attribute   0x0033   100   100   050    Pre-fail  Always       -       0
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       7361
235 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       7361
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       8936
245 Unknown_Attribute       0x0033   100   100   001    Pre-fail  Always       -       100

SMART Error Log not supported

SMART Self-test Log not supported

Selective Self-tests/Logging not supported





  reply	other threads:[~2022-11-28 12:20 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-23 11:02 Marco Gaiarin
     [not found] ` <mailman.213.1669277536.284.pve-user@lists.proxmox.com>
2022-11-24  9:52   ` Alain Péan
2022-11-25 11:11     ` Marco Gaiarin
2022-11-27 15:44 ` Yannick Palanque
2022-11-28 12:16   ` Marco Gaiarin [this message]
2022-11-28 22:36     ` Yannick Palanque
2022-12-12 16:07       ` Marco Gaiarin
2022-12-13 10:51         ` Stefan Hanreich
     [not found]           ` <ad8d7d3c-0bcc-8a53-588d-d0e75875f925@proxmox.com>
2022-12-17 12:09             ` Marco Gaiarin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y4SmmJFsc/BJ8IIy@sv.lnf.it \
    --to=gaio@lilliput.linux.it \
    --cc=pve-user@lists.proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal