* Re: [PVE-User] my network card doesnt seemed to be working
2022-03-03 20:11 ` M. Lyakhovsky
@ 2022-03-04 20:26 ` Ed Asp
2022-03-04 20:31 ` Ed Asp
1 sibling, 0 replies; 5+ messages in thread
From: Ed Asp @ 2022-03-04 20:26 UTC (permalink / raw)
To: Proxmox VE user list
hi, answering your questions:
running debian-10-turnkey-fileserver_16.1-1_amd64.tar.gz
on Prox mox 7.1-7
freshly created CT:
host: testFileserver
created with Network: IPV4-DHCP; IPV6-Static; DNS domain: use host settings; DNS servers: use host settings
after creation logged as root:
pastebin.com, and provide the output of ip addr=> do not know what is this
lspci -v => -bash: lspci: command not found
dmesg -T => dmesg: read kernel buffer failed: Operation not permitted
cat /etc/network/interfaces =>
root@testFileserver ~# cat /etc/network/interfaces
# UNCONFIGURED INTERFACES
# remove the above line if you edit this file
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
allow-hotplug eth1
iface eth1 inet dhcp
ip a =>
root@testFileserver ~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0@if112: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether e2:e0:e4:2a:b3:29 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 192.168.0.102/24 brd 192.168.0.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::e0e0:e4ff:fe2a:b329/64 scope link
valid_lft forever preferred_lft forever
________________________________
From: pve-user <pve-user-bounces@lists.proxmox.com> on behalf of M. Lyakhovsky <markl17@gmail.com>
Sent: Thursday, March 3, 2022 3:11 PM
To: Proxmox VE user list <pve-user@lists.proxmox.com>
Subject: Re: [PVE-User] my network card doesnt seemed to be working
here is compilation of all of the commands like cat /etc/network/interfaces
ip a and the rest the last is dmesg
On Thu, Mar 3, 2022 at 11:31 AM Kyle Schmitt <kyleaschmitt@gmail.com> wrote:
> You need to give a lot more information if you want help. Use a
> pastebin service, like pastebin.com, and provide the output of ip
> addr, lspci -v, and dmesg -T. Also dmidecode might help, might not,
> depends on what's really wrong.
>
> On Tue, Mar 1, 2022 at 8:11 PM M. Lyakhovsky <markl17@gmail.com> wrote:
> >
> > --
> > Do have a Blessed Day
> > _______________________________________________
> > pve-user mailing list
> > pve-user@lists.proxmox.com
> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >
>
> _______________________________________________
> pve-user mailing list
> pve-user@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>
--
Do have a Blessed Day
_______________________________________________
pve-user mailing list
pve-user@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PVE-User] my network card doesnt seemed to be working
2022-03-03 20:11 ` M. Lyakhovsky
2022-03-04 20:26 ` Ed Asp
@ 2022-03-04 20:31 ` Ed Asp
1 sibling, 0 replies; 5+ messages in thread
From: Ed Asp @ 2022-03-04 20:31 UTC (permalink / raw)
To: Proxmox VE user list
Also few minutes after installation I noticed a "top" process using a lot of CPU:
99.9 0.0 10:03.84 jitterentropy-r
________________________________
From: pve-user <pve-user-bounces@lists.proxmox.com> on behalf of M. Lyakhovsky <markl17@gmail.com>
Sent: Thursday, March 3, 2022 3:11 PM
To: Proxmox VE user list <pve-user@lists.proxmox.com>
Subject: Re: [PVE-User] my network card doesnt seemed to be working
here is compilation of all of the commands like cat /etc/network/interfaces
ip a and the rest the last is dmesg
On Thu, Mar 3, 2022 at 11:31 AM Kyle Schmitt <kyleaschmitt@gmail.com> wrote:
> You need to give a lot more information if you want help. Use a
> pastebin service, like pastebin.com, and provide the output of ip
> addr, lspci -v, and dmesg -T. Also dmidecode might help, might not,
> depends on what's really wrong.
>
> On Tue, Mar 1, 2022 at 8:11 PM M. Lyakhovsky <markl17@gmail.com> wrote:
> >
> > --
> > Do have a Blessed Day
> > _______________________________________________
> > pve-user mailing list
> > pve-user@lists.proxmox.com
> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >
>
> _______________________________________________
> pve-user mailing list
> pve-user@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>
--
Do have a Blessed Day
_______________________________________________
pve-user mailing list
pve-user@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
^ permalink raw reply [flat|nested] 5+ messages in thread