* [PVE-User] Guidance on how Proxmox 8 treats Intel VROC RAID controller on supermicro x12dpu-6 Server @ 2023-07-26 11:44 Joseph John 2023-07-26 13:07 ` Aaron Lauterer 0 siblings, 1 reply; 3+ messages in thread From: Joseph John @ 2023-07-26 11:44 UTC (permalink / raw) To: Proxmox VE user list Dear All, We are trying to install ProxMox 8 on Supermicro x12dpu-6 , with Intel VROC RAID Controller , we have configured two SSD in RAID 1 , from the BIOS in hardware level and raid volume is created, but when coming to the proxmox setup , the installation step is not showing the RAID volume, but it shows the physical disk separately . Like get guidance on how Proxmox treats Intel VROC RAID Controller and the possible next step Thanks Thanks Joseph John ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PVE-User] Guidance on how Proxmox 8 treats Intel VROC RAID controller on supermicro x12dpu-6 Server 2023-07-26 11:44 [PVE-User] Guidance on how Proxmox 8 treats Intel VROC RAID controller on supermicro x12dpu-6 Server Joseph John @ 2023-07-26 13:07 ` Aaron Lauterer [not found] ` <69448B36-7A8A-4577-9EC9-0BA25D3A93A9@me.com> 0 siblings, 1 reply; 3+ messages in thread From: Aaron Lauterer @ 2023-07-26 13:07 UTC (permalink / raw) To: Proxmox VE user list, Joseph John Please have a look at the same topic being discussed last month https://lists.proxmox.com/pipermail/pve-user/2023-June/017117.html TL;DR: VROC is usually a "fake raid" and not a real HW RAID. It only tells the OS what software RAID to create. On Linux that would typically be MD-RAID. Proxmox VE does not ship MD Raid and therefore, those disks will still be visible as single disks. Cheers, Aaron On 7/26/23 13:44, Joseph John wrote: > Dear All, > We are trying to install ProxMox 8 on Supermicro x12dpu-6 , with Intel VROC > RAID Controller , we have configured two SSD in RAID 1 , from the BIOS in > hardware level and raid volume is created, but when coming to the proxmox > setup , the installation step is not showing the RAID volume, but it shows > the physical disk separately . > Like get guidance on how Proxmox treats Intel VROC RAID Controller and the > possible next step > Thanks > > > Thanks > Joseph John > _______________________________________________ > pve-user mailing list > pve-user@lists.proxmox.com > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > ^ permalink raw reply [flat|nested] 3+ messages in thread
[parent not found: <69448B36-7A8A-4577-9EC9-0BA25D3A93A9@me.com>]
* Re: [PVE-User] Guidance on how Proxmox 8 treats Intel VROC RAID controller on supermicro x12dpu-6 Server [not found] ` <69448B36-7A8A-4577-9EC9-0BA25D3A93A9@me.com> @ 2023-07-28 8:03 ` Joseph John 0 siblings, 0 replies; 3+ messages in thread From: Joseph John @ 2023-07-28 8:03 UTC (permalink / raw) To: Proxmox VE user list; +Cc: Aaron Lauterer, Stefan Radman Dear Aaron, Stefan Good afternoon THANKS a lot Thanks for the advice of "fake RAID", based on the feedback, we are not going to use RAID I will update to the group, our progress Thanks Joseph John On Wed, Jul 26, 2023 at 6:23 PM Stefan Radman <stefan.radman@me.com> wrote: > Hi Joseph > > Further information and advice on mdraid with Proxmox can be found here > > Software RAID - Unsupported Technologies - mdraid > https://pve.proxmox.com/wiki/Software_RAID#mdraid > For non-production/unsupported setups, where you still want to use mdraid > (please don't!), you can create the required RAID level during Debian > installation and then install Proxmox VE. > > Note the “please don’t”. > > Regards > > Stefan > > > On Jul 26, 2023, at 15:07, Aaron Lauterer <a.lauterer@proxmox.com> > wrote: > > > > Please have a look at the same topic being discussed last month > https://lists.proxmox.com/pipermail/pve-user/2023-June/017117.html > > > > TL;DR: VROC is usually a "fake raid" and not a real HW RAID. It only > tells the OS what software RAID to create. On Linux that would typically be > MD-RAID. > > > > Proxmox VE does not ship MD Raid and therefore, those disks will still > be visible as single disks. > > > > Cheers, > > Aaron > > > > On 7/26/23 13:44, Joseph John wrote: > >> Dear All, > >> We are trying to install ProxMox 8 on Supermicro x12dpu-6 , with Intel > VROC > >> RAID Controller , we have configured two SSD in RAID 1 , from the BIOS > in > >> hardware level and raid volume is created, but when coming to the > proxmox > >> setup , the installation step is not showing the RAID volume, but it > shows > >> the physical disk separately . > >> Like get guidance on how Proxmox treats Intel VROC RAID Controller and > the > >> possible next step > >> Thanks > >> Thanks > >> Joseph John > >> _______________________________________________ > >> pve-user mailing list > >> pve-user@lists.proxmox.com > >> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > > _______________________________________________ > > pve-user mailing list > > pve-user@lists.proxmox.com > > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-07-28 8:03 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2023-07-26 11:44 [PVE-User] Guidance on how Proxmox 8 treats Intel VROC RAID controller on supermicro x12dpu-6 Server Joseph John 2023-07-26 13:07 ` Aaron Lauterer [not found] ` <69448B36-7A8A-4577-9EC9-0BA25D3A93A9@me.com> 2023-07-28 8:03 ` Joseph John
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.Service provided by Proxmox Server Solutions GmbH | Privacy | Legal