From: Thomas Lamprecht <t.lamprecht@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH v4 storage 12/36] multipath: apply the configuration on every node
Date: Fri, 13 Nov 2026 04:00:30 +0100 [thread overview]
Message-ID: <20261113030146.1559030-13-t.lamprecht@proxmox.com> (raw)
In-Reply-To: <20261113030146.1559030-1-t.lamprecht@proxmox.com>
Each node needs the cluster-wide configuration as local multipath.conf
drop-ins and the WWIDs of its LUNs in the allow-list of multipath:
the explicit entries valid for the node and the LUNs it sees through
sessions of enabled iSCSI storages with the multipath option.
The generated defaults set 'auto_resize grow_only', so that a map
follows a grown LUN. Missing WWIDs are added, nothing is ever removed.
multipathd is reloaded only after a change, and a failed reload is
retried after a minute. Nothing calls this yet.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
---
src/PVE/Makefile | 1 +
src/PVE/Multipath.pm | 19 ++++-
src/PVE/Multipath/Generator.pm | 112 ++++++++++++++++++++++++++++
src/PVE/Multipath/Identity.pm | 2 +-
src/PVE/Storage/ISCSIPlugin.pm | 16 ++++
src/test/Makefile | 8 +-
src/test/run_multipath_api_tests.pl | 93 +++++++++++++++++++++++
src/test/run_multipath_tests.pl | 12 +++
src/test/run_san_library_tests.pl | 6 ++
src/test/run_san_taint_tests.pl | 34 +++++++++
10 files changed, 300 insertions(+), 3 deletions(-)
create mode 100644 src/PVE/Multipath/Generator.pm
create mode 100755 src/test/run_multipath_api_tests.pl
create mode 100755 src/test/run_san_taint_tests.pl
diff --git a/src/PVE/Makefile b/src/PVE/Makefile
index 53347442..87d5c41f 100644
--- a/src/PVE/Makefile
+++ b/src/PVE/Makefile
@@ -7,6 +7,7 @@ install:
install -D -m 0644 ISCSI/Topology.pm ${DESTDIR}${PERLDIR}/PVE/ISCSI/Topology.pm
install -D -m 0644 Multipath.pm ${DESTDIR}${PERLDIR}/PVE/Multipath.pm
install -D -m 0644 Multipath/Config.pm ${DESTDIR}${PERLDIR}/PVE/Multipath/Config.pm
+ install -D -m 0644 Multipath/Generator.pm ${DESTDIR}${PERLDIR}/PVE/Multipath/Generator.pm
install -D -m 0644 Multipath/Identity.pm ${DESTDIR}${PERLDIR}/PVE/Multipath/Identity.pm
install -D -m 0644 CephConfig.pm ${DESTDIR}${PERLDIR}/PVE/CephConfig.pm
install -D -m 0644 GuestImport.pm ${DESTDIR}${PERLDIR}/PVE/GuestImport.pm
diff --git a/src/PVE/Multipath.pm b/src/PVE/Multipath.pm
index 14be0210..6f61a3fe 100644
--- a/src/PVE/Multipath.pm
+++ b/src/PVE/Multipath.pm
@@ -6,7 +6,7 @@ use Encode qw(decode encode);
use JSON qw(decode_json);
use PVE::Diskmanage;
use PVE::Multipath::Config;
-use PVE::Tools qw(run_command file_read_firstline dir_glob_foreach);
+use PVE::Tools qw(run_command file_get_contents file_read_firstline dir_glob_foreach);
my $MULTIPATH = '/sbin/multipath';
my $MULTIPATHD = '/sbin/multipathd';
@@ -167,4 +167,21 @@ sub wait_for_map($wwid, $timeout = 10) {
}
}
+sub list_etc_multipath_wwids() {
+ return [] if !-e '/etc/multipath/wwids';
+ return PVE::Multipath::Config::parse_wwids(file_get_contents('/etc/multipath/wwids'));
+}
+
+sub add_wwid($wwid) {
+ assert_supported();
+ my ($id) = $wwid =~ /^($PVE::Multipath::Config::WWID_PATTERN)\z/;
+ die "invalid WWID '$wwid'\n" if !defined($id);
+ run_command([$MULTIPATH, '-a', '--', $id], timeout => 10);
+}
+
+sub reconfigure() {
+ assert_supported();
+ run_command([$MULTIPATHD, 'reconfigure'], timeout => 30);
+}
+
1;
diff --git a/src/PVE/Multipath/Generator.pm b/src/PVE/Multipath/Generator.pm
new file mode 100644
index 00000000..971d68e4
--- /dev/null
+++ b/src/PVE/Multipath/Generator.pm
@@ -0,0 +1,112 @@
+package PVE::Multipath::Generator;
+
+use v5.36;
+
+use File::Path qw(make_path);
+use PVE::INotify;
+use PVE::Multipath;
+use PVE::Multipath::Config;
+use PVE::Multipath::Identity;
+use PVE::Tools qw(file_get_contents file_set_contents);
+
+# Local drop-ins let multipathd start before pmxcfs is available.
+our $DEFAULTS_DROPIN = '/etc/multipath/conf.d/pve-defaults.conf';
+our $OVERRIDES_DROPIN = '/etc/multipath/conf.d/pve-overrides.conf';
+our $ALIASES_DROPIN = '/etc/multipath/conf.d/pve-aliases.conf';
+our $RECONFIGURE_PENDING = '/run/pve-multipath.reconfigure-pending';
+my $failed_at;
+
+sub derived_wwids($cfg, $ids = undef) {
+ require PVE::Storage;
+ my @storages = grep {
+ my $scfg = $cfg->{ids}->{$_};
+ $scfg->{type} eq 'iscsi'
+ && $scfg->{multipath}
+ && PVE::Storage::storage_check_enabled($cfg, $_, undef, 1)
+ } sort keys $cfg->{ids}->%*;
+ if (!@storages) {
+ return {};
+ }
+ $ids //= PVE::Multipath::Identity::collect(
+ targets => { map { $cfg->{ids}->{$_}->{target} => 1 } @storages });
+ return { map { $_ => PVE::Storage::ISCSIPlugin->multipath_lun_wwids($cfg->{ids}->{$_}, $ids) }
+ @storages };
+}
+
+my sub pending() { file_set_contents($RECONFIGURE_PENDING, '') if !-e $RECONFIGURE_PENDING }
+my sub write_dropin($path, $content) {
+ my $old = -e $path ? file_get_contents($path) : '';
+ return if $old eq $content;
+ pending();
+ if (length($content)) {
+ make_path($path =~ s!/[^/]+$!!r);
+ file_set_contents($path, $content);
+ } else {
+ unlink($path) or die "cannot remove '$path' - $!\n";
+ }
+}
+
+sub regenerate($cfg = undef, $overrides = undef, $derived = undef) {
+ $cfg //= PVE::Multipath::Config::read_config();
+ $overrides //= PVE::Multipath::Config::read_overrides();
+ $derived //= {};
+ my $node = PVE::INotify::nodename();
+ my @explicit = PVE::Multipath::Config::wwids_for_node($cfg, $node)->@*;
+ my %wanted = map {
+ my $count = $cfg->{ids}->{$_}->{'paths-expected'};
+ $_ => defined($count) ? { 'paths-expected' => $count } : {}
+ } @explicit;
+ for my $sid (sort keys %$derived) {
+ for my $wwid (sort keys $derived->{$sid}->{wwids}->%*) {
+ push $wanted{$wwid}->{storages}->@*, $sid;
+ my $expected = $derived->{$sid}->{wwids}->{$wwid}->{'paths-expected'};
+ $wanted{$wwid}->{'paths-expected'} = $expected
+ if defined($expected) && $expected > ($wanted{$wwid}->{'paths-expected'} // 0);
+ }
+ }
+ eval {
+ my $in_use = @explicit || keys(%$derived) || length($overrides);
+ write_dropin(
+ $DEFAULTS_DROPIN,
+ $in_use ? PVE::Multipath::Config::generate_managed_conf() : '',
+ );
+ write_dropin(
+ $OVERRIDES_DROPIN,
+ length($overrides) ? "# Managed by Proxmox VE.\n$overrides" : '',
+ );
+ write_dropin(
+ $ALIASES_DROPIN,
+ @explicit ? PVE::Multipath::Config::build_multipaths_block($cfg, $node) : '',
+ );
+ my %current = map { $_ => 1 } PVE::Multipath::list_etc_multipath_wwids()->@*;
+ for my $wwid (sort keys %wanted) {
+ next if $current{$wwid};
+ pending();
+ PVE::Multipath::add_wwid($wwid);
+ }
+ if (-e $RECONFIGURE_PENDING) {
+ die "multipath reload pending after a failed reload\n"
+ if defined($failed_at) && time() - $failed_at < 60;
+ eval { PVE::Multipath::reconfigure() };
+ if (my $error = $@) {
+ $failed_at = time();
+ die $error;
+ }
+ unlink($RECONFIGURE_PENDING) or die "cannot clear multipath reload marker - $!\n";
+ $failed_at = undef;
+ }
+ };
+ my $error = $@;
+ return { wwids => \%wanted, $error ? (error => $error) : () };
+}
+
+sub sync() {
+ return {} if !PVE::Multipath::is_supported();
+ my $res = eval {
+ require PVE::Storage;
+ regenerate(undef, undef, derived_wwids(PVE::Storage::config()));
+ };
+ return $res // { error => "$@" };
+}
+
+1;
diff --git a/src/PVE/Multipath/Identity.pm b/src/PVE/Multipath/Identity.pm
index 4362c041..e3f6c22b 100644
--- a/src/PVE/Multipath/Identity.pm
+++ b/src/PVE/Multipath/Identity.pm
@@ -28,7 +28,7 @@ sub collect(%param) {
($wwid) = $data =~ m/^E:ID_SERIAL=(.+)$/m;
}
return if !defined($wwid) || $wwid !~ $PVE::Multipath::Config::WWID_RE;
- $paths{$dev} = { wwid => $wwid };
+ $paths{$dev} = { wwid => $wwid, $session ? (target => $session->{target}) : () };
},
);
return {
diff --git a/src/PVE/Storage/ISCSIPlugin.pm b/src/PVE/Storage/ISCSIPlugin.pm
index b66a94b4..3bddcda6 100644
--- a/src/PVE/Storage/ISCSIPlugin.pm
+++ b/src/PVE/Storage/ISCSIPlugin.pm
@@ -347,6 +347,22 @@ sub iscsi_device_list {
return $res;
}
+# Each portal of the connection storage contributes one expected path.
+sub multipath_lun_wwids {
+ my ($class, $scfg, $ids) = @_;
+
+ my $res = { wwids => {} };
+ my $target = $scfg->{target};
+
+ my $portals = iscsi_portals($target, $scfg->{portal});
+ for my $path (values $ids->{paths}->%*) {
+ next if ($path->{target} // '') ne $target;
+ $res->{wwids}->{ $path->{wwid} } = { 'paths-expected' => scalar(@$portals) };
+ }
+
+ return $res;
+}
+
# Configuration
sub type {
diff --git a/src/test/Makefile b/src/test/Makefile
index c3632e05..a758e593 100644
--- a/src/test/Makefile
+++ b/src/test/Makefile
@@ -1,6 +1,6 @@
all: test
-test: test_iscsi test_zfspoolplugin test_lvmplugin test_lvm_create test_lvm_lock_retry test_lvm_base_volume test_lvm_hints test_disklist test_bwlimit test_plugin test_ovf test_volume_access test_remote_command test_multipath test_san_libraries test_lun_identity test_lvm_base_activation
+test: test_iscsi test_zfspoolplugin test_lvmplugin test_lvm_create test_lvm_lock_retry test_lvm_base_volume test_lvm_hints test_disklist test_bwlimit test_plugin test_ovf test_volume_access test_remote_command test_multipath test_san_libraries test_lun_identity test_lvm_base_activation test_multipath_api test_san_taint
test_zfspoolplugin: run_test_zfspoolplugin.pl
./run_test_zfspoolplugin.pl
@@ -59,3 +59,9 @@ test_lun_identity: run_lun_identity_tests.pl
test_lvm_base_activation: run_test_lvm_base_activation.pl
./run_test_lvm_base_activation.pl
+
+test_multipath_api: run_multipath_api_tests.pl
+ ./run_multipath_api_tests.pl
+
+test_san_taint: run_san_taint_tests.pl
+ perl -T ./run_san_taint_tests.pl
diff --git a/src/test/run_multipath_api_tests.pl b/src/test/run_multipath_api_tests.pl
new file mode 100755
index 00000000..82aaa5f0
--- /dev/null
+++ b/src/test/run_multipath_api_tests.pl
@@ -0,0 +1,93 @@
+#!/usr/bin/perl
+
+use v5.36;
+our $NOW = 1000;
+
+BEGIN {
+ *CORE::GLOBAL::time = sub { $NOW }
+}
+use lib ('.', '..');
+use File::Temp qw(tempdir);
+use Test::More;
+use Test::MockModule;
+use PVE::Multipath::Generator;
+
+subtest 'add-only generation and failed reload throttle' => sub {
+ my $dir = tempdir('multipath-test-XXXX', DIR => '.', CLEANUP => 1);
+ local $PVE::Multipath::Generator::DEFAULTS_DROPIN = "$dir/defaults";
+ local $PVE::Multipath::Generator::OVERRIDES_DROPIN = "$dir/overrides";
+ local $PVE::Multipath::Generator::ALIASES_DROPIN = "$dir/aliases";
+ local $PVE::Multipath::Generator::RECONFIGURE_PENDING = "$dir/pending";
+ my $node = Test::MockModule->new('PVE::INotify');
+ $node->mock(nodename => sub { 'n1' });
+ my $mp = Test::MockModule->new('PVE::Multipath');
+ my (%listed, @added, $reloads, $fail);
+ $mp->mock(list_etc_multipath_wwids => sub { [sort keys %listed] });
+ $mp->mock(add_wwid => sub { $listed{ $_[0] } = 1; push @added, $_[0] });
+ $mp->mock(reconfigure => sub { $reloads++; die "reload failed\n" if $fail });
+ my $cfg = { ids => { '3600a' => { type => 'wwid', alias => 'data' } } };
+ my $res = PVE::Multipath::Generator::regenerate($cfg, '', {});
+ is_deeply(\@added, ['3600a'], 'missing WWID added');
+ is_deeply($res->{wwids}->{'3600a'}, {}, 'no expected path count without one in the entry');
+ is($reloads, 1, 'changed config reloaded');
+ $res = PVE::Multipath::Generator::regenerate(
+ { ids => { '3600a' => { $cfg->{ids}->{'3600a'}->%*, 'paths-expected' => 2 } } },
+ '',
+ {},
+ );
+ is($res->{wwids}->{'3600a'}->{'paths-expected'}, 2, 'expected path count of the entry');
+ is($reloads, 1, 'unchanged config not reloaded');
+ PVE::Multipath::Generator::regenerate({ ids => {} }, '', {});
+ ok($listed{'3600a'}, 'removed entry remains allow-listed');
+ $fail = 1;
+ my $failed = PVE::Multipath::Generator::regenerate($cfg, '', {});
+ like($failed->{error}, qr/reload failed/, 'reload error returned');
+ ok(exists($failed->{wwids}->{'3600a'}), 'apply failure retains wanted LUNs');
+ ok(-e "$dir/pending", 'failed reload remains pending');
+ my $count = $reloads;
+ $NOW += 59;
+ $failed = PVE::Multipath::Generator::regenerate($cfg, '', {});
+ like($failed->{error}, qr/reload pending/, 'pending reload remains visible');
+ is($reloads, $count, 'no retry before 60 seconds');
+ $NOW++;
+ $fail = 0;
+ PVE::Multipath::Generator::regenerate($cfg, '', {});
+ is($reloads, $count + 1, 'retry at 60 seconds');
+ ok(!-e "$dir/pending", 'successful reload clears pending marker');
+};
+
+subtest 'storage LUNs are the identified paths of the storage target' => sub {
+ my $topology = Test::MockModule->new('PVE::ISCSI::Topology');
+ $topology->mock(
+ device_map => sub {
+ return { map { $_ => { target => $_ eq 'sdc' ? 'iqn.other' : 'iqn.san' } }
+ qw(sda sdb sdc) };
+ },
+ );
+ my $identity = Test::MockModule->new('PVE::Multipath::Identity');
+ $identity->mock(dir_glob_foreach => sub { $_[2]->($_) for qw(sda sdb sdc sdd) });
+ my $mp = Test::MockModule->new('PVE::Multipath');
+ my %wwid = (sda => '3600a', sdb => '3600a', sdc => '3600b', sdd => '3600c');
+ $mp->mock(
+ query_path_identities => sub {
+ return { map { $_ => { wwid => $wwid{$_} } } keys %wwid };
+ },
+ );
+ my $iscsi = Test::MockModule->new('PVE::Storage::ISCSIPlugin');
+ $iscsi->mock(iscsi_portals => sub { ['192.0.2.1:3260', '192.0.2.2:3260'] });
+ my $cfg = { ids => { san => { type => 'iscsi', target => 'iqn.san', multipath => 1 } } };
+ my $expected = { san => { wwids => { '3600a' => { 'paths-expected' => 2 } } } };
+ is_deeply(
+ PVE::Multipath::Generator::derived_wwids($cfg),
+ $expected,
+ 'one WWID per LUN of the target, one expected path per portal',
+ );
+ my $all = PVE::Multipath::Identity::collect(all => 1);
+ is_deeply(
+ PVE::Multipath::Generator::derived_wwids($cfg, $all),
+ $expected,
+ 'paths of other targets and transports in a full collection are left out',
+ );
+};
+
+done_testing();
diff --git a/src/test/run_multipath_tests.pl b/src/test/run_multipath_tests.pl
index ae44e962..c8800c38 100755
--- a/src/test/run_multipath_tests.pl
+++ b/src/test/run_multipath_tests.pl
@@ -146,7 +146,19 @@ subtest 'one owner for map identity and membership' => sub {
subtest 'short commands and link-only assembly wait' => sub {
my $mp = Test::MockModule->new('PVE::Multipath');
my @calls;
+ $mp->mock(is_supported => sub { 1 });
$mp->mock(run_command => sub($cmd, %opts) { push @calls, [$cmd, $opts{timeout}] });
+ PVE::Multipath::add_wwid('3600a');
+ PVE::Multipath::reconfigure();
+ is_deeply(
+ \@calls,
+ [
+ [['/sbin/multipath', '-a', '--', '3600a'], 10],
+ [['/sbin/multipathd', 'reconfigure'], 30],
+ ],
+ 'loop commands have short timeouts',
+ );
+ @calls = ();
ok(
!PVE::Multipath::wait_for_map('nonexistent-test-lun', 0),
'missing by-id block link times out',
diff --git a/src/test/run_san_library_tests.pl b/src/test/run_san_library_tests.pl
index 819b9fc3..2ec2a651 100755
--- a/src/test/run_san_library_tests.pl
+++ b/src/test/run_san_library_tests.pl
@@ -13,6 +13,7 @@ my %registered;
my $cluster = Test::MockModule->new('PVE::Cluster');
$cluster->mock(cfs_register_file => sub { $registered{ $_[0] } = [@_[1, 2]] });
require PVE::Multipath::Config;
+require PVE::Multipath::Generator;
subtest 'CFS callbacks preserve filenames, data and method receivers' => sub {
my ($parse, $write) = $registered{'multipath.cfg'}->@*;
@@ -31,6 +32,11 @@ subtest 'CFS callbacks preserve filenames, data and method receivers' => sub {
subtest 'omitted optional parameters retain explicit undef behavior' => sub {
my $config = Test::MockModule->new('PVE::Multipath::Config');
+ $config->mock(read_config => sub { die "configuration unavailable\n" });
+ for my $args ([], [undef, undef, undef]) {
+ eval { PVE::Multipath::Generator::regenerate(@$args) };
+ is($@, "configuration unavailable\n", 'regeneration reads the default configuration');
+ }
$config->mock(cfs_lock_file => sub { $@ = "lock unavailable\n" });
for my $lock (
\&PVE::Multipath::Config::lock_config, \&PVE::Multipath::Config::lock_overrides,
diff --git a/src/test/run_san_taint_tests.pl b/src/test/run_san_taint_tests.pl
new file mode 100755
index 00000000..35b11cd7
--- /dev/null
+++ b/src/test/run_san_taint_tests.pl
@@ -0,0 +1,34 @@
+#!/usr/bin/perl -T
+
+use v5.36;
+use lib ('.', '..');
+use File::Temp qw(tempfile);
+use Scalar::Util qw(tainted);
+use Test::MockModule;
+use Test::More;
+use PVE::Multipath;
+use PVE::Tools;
+
+$ENV{PATH} = '/usr/sbin:/usr/bin:/sbin:/bin';
+delete @ENV{qw(IFS CDPATH ENV BASH_ENV)};
+my ($fh, $path) = tempfile('multipath-taint-XXXX', DIR => '.', UNLINK => 1);
+print $fh '3600a';
+close($fh);
+my $wwid = PVE::Tools::file_get_contents($path);
+ok(tainted($wwid), 'WWID read from file is tainted');
+my $mp = Test::MockModule->new('PVE::Multipath');
+$mp->mock(is_supported => sub { 1 });
+$mp->mock(
+ run_command => sub($cmd, %opts) {
+ is_deeply($cmd, ['/sbin/multipath', '-a', '--', '3600a'], 'WWID add command');
+ ok($opts{timeout}, 'command is bounded');
+ PVE::Tools::run_command(['/usr/bin/true', @$cmd]);
+ },
+);
+PVE::Multipath::add_wwid($wwid);
+for my $bad ('-bad', '1:2', '../dev', "3600a\n") {
+ eval { PVE::Multipath::add_wwid($bad) };
+ like($@, qr/invalid WWID/, 'ambiguous identity refused');
+}
+
+done_testing();
next prev parent reply other threads:[~2026-11-13 3:10 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-13 3:00 [PATCH v4 cluster,storage,docs,manager 00/36] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 cluster 01/36] cfs: observe the multipath configuration files Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 02/36] diskmanage: collect disk transport type from lsblk Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 03/36] diskmanage: qualify NVMe over fabrics transport Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 04/36] diskmanage: optionally include iSCSI session devices in disk enumeration Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 05/36] diskmanage: collect native NVMe multipath path state Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 06/36] iscsi: factor out session device map from device list Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 07/36] multipath: add a library around multipathd Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 08/36] diskmanage: add helper to list multipath devices Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 09/36] multipath: add a cluster-wide configuration Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 10/36] iscsi: add an option to manage storage LUNs with multipath Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 11/36] lvm: activate a missing base volume before using the volume group Thomas Lamprecht
2026-11-13 3:00 ` Thomas Lamprecht [this message]
2026-11-13 3:00 ` [PATCH v4 storage 13/36] multipath: publish per-node status Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 14/36] api: add endpoints for the cluster-wide multipath configuration Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 15/36] api: multipath: add the cluster-wide health status Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 16/36] api: scan: add a SAN LUN inventory Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 17/36] pvesm: expose the " Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 18/36] api: add node-level iSCSI status Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 19/36] disks: lvm: drop unused imports Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 20/36] disks: lvm: allow volume groups on SAN LUNs and multipath maps Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 21/36] disks: lvm: refuse to destroy the volume group of a shared storage Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 storage 22/36] disks: allow wiping a SAN LUN that no storage uses Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 docs 23/36] storage: document the cluster-wide multipath management Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 24/36] pvestatd: apply the multipath configuration and report the node status Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 25/36] report: add the managed multipath configuration Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 26/36] api: cluster: add the multipath endpoints Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 27/36] api: nodes: expose the iSCSI status Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 28/36] ui: dc: add a SAN view Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 29/36] ui: storage: iscsi: add the multipath option Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 30/36] ui: lvm: enable shared when a base storage is selected Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 31/36] ui: node: add SAN LUNs panel Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 32/36] ui: node: san: wipe a LUN that no storage uses Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 33/36] ui: node: san: show iSCSI targets and sessions Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 34/36] ui: dc: san: add a guided setup for shared LVM on iSCSI Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 35/36] ui: dc: san: add a guided setup for shared LVM on Fibre Channel Thomas Lamprecht
2026-11-13 3:00 ` [PATCH v4 manager 36/36] ui: storage: point the iSCSI and LVM add dialogs to the SAN view Thomas Lamprecht
2026-11-16 1:28 ` superseded: [PATCH v4 cluster,storage,docs,manager 00/36] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM Thomas Lamprecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261113030146.1559030-13-t.lamprecht@proxmox.com \
--to=t.lamprecht@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.