From: Dominik Rusovac <d.rusovac@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH pve-ha-manager v2 18/19] fix #7993: manager,usage: use weights for static and dynamic mode
Date: Thu, 12 Nov 2026 10:44:36 +0100 [thread overview]
Message-ID: <20261112094437.1951271-19-d.rusovac@proxmox.com> (raw)
In-Reply-To: <20261112094437.1951271-1-d.rusovac@proxmox.com>
pass the ha-cpu-weight and ha-mem-weight CRS options to the static and
dynamic scheduler, so that users can prioritize balancing the CPU load
or the memory usage of nodes. weights apply to the load imbalance, both
automatic rebalancing methods and the selection of a node to start or
recover a resource on
without configured weights, the TOPSIS method keeps favoring memory
usage 5 times over CPU load. if TOPSIS is the automatic rebalancing
method, pass weights of 1:5 in that case, so that the node imbalance is
weighted the same way and reflects what the TOPSIS method balances. this
changes the behavior for existing setups using the TOPSIS method: after
upgrading, their load imbalance is dominated by memory usage. setups
using the bruteforce method keep the unweighted load imbalance
log changes to the weights as they are passed to the scheduler, so that
the implicit memory weight of 5 shows up in the log when configuring or
removing weights, or when switching the automatic rebalancing method
if both weights are set to 0, no resource contributes to the node load,
so there is nothing to balance. skip automatic rebalancing and log a
warning once in that case. the weights are not passed to the scheduler
then, so selecting a node to start or recover a resource on keeps
working with the default weights instead of failing to score
allow changing the weights in the simulator at runtime, and add a test
case with both weights set to 0, which neither rebalances nor fails to
start the resources. Update the expected log of the existing TOPSIS test
case whose node imbalance changes with the weights of 1:5: the reported
imbalance values differ, and the last rebalancing migration is not done
anymore
passing weights requires a version of libpve-rs-perl that supports
scheduler options. older versions reject the options, so the scheduler
fails to initialize and falls back to the 'basic' mode. this happens
whenever weights are configured, and also without configured weights if
TOPSIS is the rebalancing method, as weights of 1:5 are passed then
Signed-off-by: Dominik Rusovac <d.rusovac@proxmox.com>
---
Notes:
changes since v1:
* reword commit
* name options ha-cpu-weight and ha-mem-weight, as they also apply
to placing resources on start and recovery
* weights are passed once on scheduler construction instead of to each
method, see the proxmox-perl-rs patch
* weights are kept outside of auto_rebalance
* skip rebalancing and warn once if both weights are 0
* log the weights as passed to the scheduler, including the implicit
memory weight of 5 for TOPSIS
* add zero-weights test case
* adjust existing topsis test
using weights requires a libpve-rs-perl version with scheduler options support
src/PVE/HA/Manager.pm | 46 ++++++++++++++++++-
src/PVE/HA/Sim/Hardware.pm | 2 +
src/PVE/HA/Usage/Dynamic.pm | 6 ++-
src/PVE/HA/Usage/Static.pm | 6 ++-
.../log.expect | 13 +-----
.../README | 6 +++
.../cmdlist | 3 ++
.../datacenter.cfg | 8 ++++
.../dynamic_service_stats | 6 +++
.../hardware_status | 5 ++
.../log.expect | 41 +++++++++++++++++
.../manager_status | 1 +
.../service_config | 6 +++
.../static_service_stats | 6 +++
14 files changed, 138 insertions(+), 17 deletions(-)
create mode 100644 src/test/test-crs-dynamic-auto-rebalance-zero-weights/README
create mode 100644 src/test/test-crs-dynamic-auto-rebalance-zero-weights/cmdlist
create mode 100644 src/test/test-crs-dynamic-auto-rebalance-zero-weights/datacenter.cfg
create mode 100644 src/test/test-crs-dynamic-auto-rebalance-zero-weights/dynamic_service_stats
create mode 100644 src/test/test-crs-dynamic-auto-rebalance-zero-weights/hardware_status
create mode 100644 src/test/test-crs-dynamic-auto-rebalance-zero-weights/log.expect
create mode 100644 src/test/test-crs-dynamic-auto-rebalance-zero-weights/manager_status
create mode 100644 src/test/test-crs-dynamic-auto-rebalance-zero-weights/service_config
create mode 100644 src/test/test-crs-dynamic-auto-rebalance-zero-weights/static_service_stats
diff --git a/src/PVE/HA/Manager.pm b/src/PVE/HA/Manager.pm
index 7de8781..3db5402 100644
--- a/src/PVE/HA/Manager.pm
+++ b/src/PVE/HA/Manager.pm
@@ -174,6 +174,39 @@ sub update_crs_settings {
0.1,
);
+ my ($cpu_weight, $mem_weight) = $crs_cfg->@{qw(ha-cpu-weight ha-mem-weight)};
+ my $weights_configured = defined($cpu_weight) || defined($mem_weight);
+ # the legacy TOPSIS criteria favor memory usage 5 times over CPU load by default, weigh the node
+ # load the same way, so that the imbalance reflects what the TOPSIS method balances
+ my $use_legacy_topsis_weights = !$weights_configured && $auto_rebalance->{method} eq 'topsis';
+
+ $self->update_crs_option('ha-cpu-weight', \$crs->{cpu_weight}, $cpu_weight, 1);
+ $self->update_crs_option(
+ 'ha-mem-weight',
+ \$crs->{mem_weight},
+ $mem_weight,
+ $use_legacy_topsis_weights ? 5 : 1,
+ );
+
+ my $scheduler_options;
+ my $all_weights_zero = 0;
+ if (!$crs->{cpu_weight} && !$crs->{mem_weight}) {
+ # no resource would contribute to the node load, so there is nothing to balance; keep
+ # the default weights for selecting nodes to start or recover resources on
+ $haenv->log(
+ 'warning',
+ "all CRS weights are set to 0, ignoring them and skipping automatic rebalancing",
+ ) if !$crs->{all_weights_zero};
+ $all_weights_zero = 1;
+ } elsif ($weights_configured || $use_legacy_topsis_weights) {
+ $scheduler_options = {
+ 'cpu-weight' => $crs->{cpu_weight},
+ 'mem-weight' => $crs->{mem_weight},
+ };
+ }
+ $crs->{scheduler_options} = $scheduler_options;
+ $crs->{all_weights_zero} = $all_weights_zero;
+
return;
}
@@ -276,6 +309,7 @@ sub load_balance {
return if !$auto_rebalance_opts->{enable};
return if $crs->{scheduler} ne 'static' && $crs->{scheduler} ne 'dynamic';
+ return if $crs->{all_weights_zero};
return if $self->any_resource_motion_queued_or_running();
my ($threshold, $method, $hold_duration, $margin) =
@@ -489,7 +523,11 @@ sub recompute_online_node_usage {
if ($have_static_scheduling) {
$online_node_usage = eval {
$service_stats = $haenv->get_static_service_stats();
- my $scheduler = PVE::HA::Usage::Static->new($haenv, $service_stats);
+ my $scheduler = PVE::HA::Usage::Static->new(
+ $haenv,
+ $service_stats,
+ $self->{crs}->{scheduler_options},
+ );
$scheduler->add_node($_) for $online_nodes->@*;
return $scheduler;
};
@@ -504,7 +542,11 @@ sub recompute_online_node_usage {
if ($have_dynamic_scheduling) {
$online_node_usage = eval {
$service_stats = $haenv->get_dynamic_service_stats();
- my $scheduler = PVE::HA::Usage::Dynamic->new($haenv, $service_stats);
+ my $scheduler = PVE::HA::Usage::Dynamic->new(
+ $haenv,
+ $service_stats,
+ $self->{crs}->{scheduler_options},
+ );
$scheduler->add_node($_) for $online_nodes->@*;
return $scheduler;
};
diff --git a/src/PVE/HA/Sim/Hardware.pm b/src/PVE/HA/Sim/Hardware.pm
index f3d8301..957548a 100644
--- a/src/PVE/HA/Sim/Hardware.pm
+++ b/src/PVE/HA/Sim/Hardware.pm
@@ -712,6 +712,8 @@ my $datacenter_settings = {
'ha-auto-rebalance-method' => qr/^(?:bruteforce|topsis)$/,
'ha-auto-rebalance-hold-duration' => qr/^\d+$/,
'ha-auto-rebalance-margin' => qr/^\d+(?:\.\d+)?$/,
+ 'ha-cpu-weight' => qr/^\d+$/,
+ 'ha-mem-weight' => qr/^\d+$/,
},
};
diff --git a/src/PVE/HA/Usage/Dynamic.pm b/src/PVE/HA/Usage/Dynamic.pm
index 76d0fea..0da6115 100644
--- a/src/PVE/HA/Usage/Dynamic.pm
+++ b/src/PVE/HA/Usage/Dynamic.pm
@@ -9,12 +9,14 @@ use PVE::RS::ResourceScheduling::Dynamic;
use base qw(PVE::HA::Usage);
sub new {
- my ($class, $haenv, $service_stats) = @_;
+ my ($class, $haenv, $service_stats, $scheduler_options) = @_;
my $node_stats = eval { $haenv->get_dynamic_node_stats() };
die "did not get dynamic node usage information - $@" if $@;
- my $scheduler = eval { PVE::RS::ResourceScheduling::Dynamic->new() };
+ # only pass options if there are any, so that older versions of the bindings still work
+ my @args = defined($scheduler_options) ? ($scheduler_options) : ();
+ my $scheduler = eval { PVE::RS::ResourceScheduling::Dynamic->new(@args) };
die "unable to initialize dynamic scheduling - $@" if $@;
return bless {
diff --git a/src/PVE/HA/Usage/Static.pm b/src/PVE/HA/Usage/Static.pm
index e67d5f5..9b91ba6 100644
--- a/src/PVE/HA/Usage/Static.pm
+++ b/src/PVE/HA/Usage/Static.pm
@@ -9,12 +9,14 @@ use PVE::RS::ResourceScheduling::Static;
use base qw(PVE::HA::Usage);
sub new {
- my ($class, $haenv, $service_stats) = @_;
+ my ($class, $haenv, $service_stats, $scheduler_options) = @_;
my $node_stats = eval { $haenv->get_static_node_stats() };
die "did not get static node usage information - $@" if $@;
- my $scheduler = eval { PVE::RS::ResourceScheduling::Static->new(); };
+ # only pass options if there are any, so that older versions of the bindings still work
+ my @args = defined($scheduler_options) ? ($scheduler_options) : ();
+ my $scheduler = eval { PVE::RS::ResourceScheduling::Static->new(@args) };
die "unable to initialize static scheduling - $@" if $@;
return bless {
diff --git a/src/test/test-crs-dynamic-auto-rebalance-topsis3/log.expect b/src/test/test-crs-dynamic-auto-rebalance-topsis3/log.expect
index 8779848..0847a04 100644
--- a/src/test/test-crs-dynamic-auto-rebalance-topsis3/log.expect
+++ b/src/test/test-crs-dynamic-auto-rebalance-topsis3/log.expect
@@ -55,7 +55,7 @@ info 25 node3/lrm: service status vm:107 started
info 120 cmdlist: execute service vm:105 set-dynamic-stats cpu 7.8 mem 7912
info 120 cmdlist: execute service vm:106 set-dynamic-stats cpu 5.7 mem 8192
info 120 cmdlist: execute service vm:107 set-dynamic-stats cpu 6.0 mem 8011
-info 160 node1/crm: auto rebalance - migrate vm:105 to node2 (expected change for imbalance from 60.2% to 29.8%)
+info 160 node1/crm: auto rebalance - migrate vm:105 to node2 (expected change for imbalance from 48.2% to 24.0%)
info 160 node1/crm: got crm command: migrate vm:105 node2
info 160 node1/crm: migrate service 'vm:105' to node 'node2'
info 160 node1/crm: service 'vm:105': state changed from 'started' to 'migrate' (node = node3, target = node2)
@@ -70,7 +70,7 @@ info 220 cmdlist: execute service vm:104 set-dynamic-stats cpu 6.7 mem 8
info 220 cmdlist: execute service vm:105 set-dynamic-stats cpu 1.8 mem 1201
info 220 cmdlist: execute service vm:106 set-dynamic-stats cpu 2.1 mem 1211
info 220 cmdlist: execute service vm:107 set-dynamic-stats cpu 0.9 mem 1191
-info 260 node1/crm: auto rebalance - migrate vm:103 to node3 (expected change for imbalance from 57.3% to 30.1%)
+info 260 node1/crm: auto rebalance - migrate vm:103 to node3 (expected change for imbalance from 58.4% to 27.4%)
info 260 node1/crm: got crm command: migrate vm:103 node3
info 260 node1/crm: migrate service 'vm:103' to node 'node3'
info 260 node1/crm: service 'vm:103': state changed from 'started' to 'migrate' (node = node2, target = node3)
@@ -79,13 +79,4 @@ info 263 node2/lrm: service vm:103 - end migrate to node 'node3'
info 280 node1/crm: service 'vm:103': state changed from 'migrate' to 'started' (node = node3)
info 285 node3/lrm: starting service vm:103
info 285 node3/lrm: service status vm:103 started
-info 340 node1/crm: auto rebalance - migrate vm:105 to node1 (expected change for imbalance from 30.1% to 17.0%)
-info 340 node1/crm: got crm command: migrate vm:105 node1
-info 340 node1/crm: migrate service 'vm:105' to node 'node1'
-info 340 node1/crm: service 'vm:105': state changed from 'started' to 'migrate' (node = node2, target = node1)
-info 343 node2/lrm: service vm:105 - start migrate to node 'node1'
-info 343 node2/lrm: service vm:105 - end migrate to node 'node1'
-info 360 node1/crm: service 'vm:105': state changed from 'migrate' to 'started' (node = node1)
-info 361 node1/lrm: starting service vm:105
-info 361 node1/lrm: service status vm:105 started
info 820 hardware: exit simulation - done
diff --git a/src/test/test-crs-dynamic-auto-rebalance-zero-weights/README b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/README
new file mode 100644
index 0000000..8108448
--- /dev/null
+++ b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/README
@@ -0,0 +1,6 @@
+Test that the auto rebalance system with dynamic usage information does not
+rebalance if all CRS weights are set to 0, as no resource contributes to the
+node load then.
+
+The same setup without weights causes two rebalancing migrations, see
+test-crs-dynamic-auto-rebalance2. A warning is logged once instead.
diff --git a/src/test/test-crs-dynamic-auto-rebalance-zero-weights/cmdlist b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/cmdlist
new file mode 100644
index 0000000..13f90cd
--- /dev/null
+++ b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/cmdlist
@@ -0,0 +1,3 @@
+[
+ [ "power node1 on", "power node2 on", "power node3 on" ]
+]
diff --git a/src/test/test-crs-dynamic-auto-rebalance-zero-weights/datacenter.cfg b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/datacenter.cfg
new file mode 100644
index 0000000..c395bc8
--- /dev/null
+++ b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/datacenter.cfg
@@ -0,0 +1,8 @@
+{
+ "crs": {
+ "ha": "dynamic",
+ "ha-auto-rebalance": 1,
+ "ha-cpu-weight": 0,
+ "ha-mem-weight": 0
+ }
+}
diff --git a/src/test/test-crs-dynamic-auto-rebalance-zero-weights/dynamic_service_stats b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/dynamic_service_stats
new file mode 100644
index 0000000..f01fd76
--- /dev/null
+++ b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/dynamic_service_stats
@@ -0,0 +1,6 @@
+{
+ "vm:101": { "cpu": 1.0, "mem": 4294967296 },
+ "vm:102": { "cpu": 1.0, "mem": 4294967296 },
+ "vm:103": { "cpu": 1.0, "mem": 4294967296 },
+ "vm:104": { "cpu": 1.0, "mem": 4294967296 }
+}
diff --git a/src/test/test-crs-dynamic-auto-rebalance-zero-weights/hardware_status b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/hardware_status
new file mode 100644
index 0000000..ce8cf0e
--- /dev/null
+++ b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/hardware_status
@@ -0,0 +1,5 @@
+{
+ "node1": { "power": "off", "network": "off", "maxcpu": 24, "maxmem": 34359738368 },
+ "node2": { "power": "off", "network": "off", "maxcpu": 24, "maxmem": 34359738368 },
+ "node3": { "power": "off", "network": "off", "maxcpu": 24, "maxmem": 34359738368 }
+}
diff --git a/src/test/test-crs-dynamic-auto-rebalance-zero-weights/log.expect b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/log.expect
new file mode 100644
index 0000000..792a3a2
--- /dev/null
+++ b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/log.expect
@@ -0,0 +1,41 @@
+info 0 hardware: starting simulation
+info 20 cmdlist: execute power node1 on
+info 20 node1/crm: status change startup => wait_for_quorum
+info 20 node1/lrm: status change startup => wait_for_agent_lock
+info 20 cmdlist: execute power node2 on
+info 20 node2/crm: status change startup => wait_for_quorum
+info 20 node2/lrm: status change startup => wait_for_agent_lock
+info 20 cmdlist: execute power node3 on
+info 20 node3/crm: status change startup => wait_for_quorum
+info 20 node3/lrm: status change startup => wait_for_agent_lock
+info 20 node1/crm: got lock 'ha_manager_lock'
+info 20 node1/crm: status change wait_for_quorum => master
+info 20 node1/crm: using scheduler mode 'dynamic'
+info 20 node1/crm: using ha-auto-rebalance '1'
+info 20 node1/crm: using ha-cpu-weight '0'
+info 20 node1/crm: using ha-mem-weight '0'
+warn 20 node1/crm: all CRS weights are set to 0, ignoring them and skipping automatic rebalancing
+info 20 node1/crm: node 'node1': state changed from 'unknown' => 'online'
+info 20 node1/crm: node 'node2': state changed from 'unknown' => 'online'
+info 20 node1/crm: node 'node3': state changed from 'unknown' => 'online'
+info 20 node1/crm: adding new service 'vm:101' on node 'node1'
+info 20 node1/crm: adding new service 'vm:102' on node 'node1'
+info 20 node1/crm: adding new service 'vm:103' on node 'node1'
+info 20 node1/crm: adding new service 'vm:104' on node 'node1'
+info 20 node1/crm: service 'vm:101': state changed from 'request_start' to 'started' (node = node1)
+info 20 node1/crm: service 'vm:102': state changed from 'request_start' to 'started' (node = node1)
+info 20 node1/crm: service 'vm:103': state changed from 'request_start' to 'started' (node = node1)
+info 20 node1/crm: service 'vm:104': state changed from 'request_start' to 'started' (node = node1)
+info 21 node1/lrm: got lock 'ha_agent_node1_lock'
+info 21 node1/lrm: status change wait_for_agent_lock => active
+info 21 node1/lrm: starting service vm:101
+info 21 node1/lrm: service status vm:101 started
+info 21 node1/lrm: starting service vm:102
+info 21 node1/lrm: service status vm:102 started
+info 21 node1/lrm: starting service vm:103
+info 21 node1/lrm: service status vm:103 started
+info 21 node1/lrm: starting service vm:104
+info 21 node1/lrm: service status vm:104 started
+info 22 node2/crm: status change wait_for_quorum => slave
+info 24 node3/crm: status change wait_for_quorum => slave
+info 620 hardware: exit simulation - done
diff --git a/src/test/test-crs-dynamic-auto-rebalance-zero-weights/manager_status b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/manager_status
new file mode 100644
index 0000000..0967ef4
--- /dev/null
+++ b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/manager_status
@@ -0,0 +1 @@
+{}
diff --git a/src/test/test-crs-dynamic-auto-rebalance-zero-weights/service_config b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/service_config
new file mode 100644
index 0000000..b5960cb
--- /dev/null
+++ b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/service_config
@@ -0,0 +1,6 @@
+{
+ "vm:101": { "node": "node1", "state": "started" },
+ "vm:102": { "node": "node1", "state": "started" },
+ "vm:103": { "node": "node1", "state": "started" },
+ "vm:104": { "node": "node1", "state": "started" }
+}
diff --git a/src/test/test-crs-dynamic-auto-rebalance-zero-weights/static_service_stats b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/static_service_stats
new file mode 100644
index 0000000..6cf8c10
--- /dev/null
+++ b/src/test/test-crs-dynamic-auto-rebalance-zero-weights/static_service_stats
@@ -0,0 +1,6 @@
+{
+ "vm:101": { "maxcpu": 2.0, "maxmem": 8589934592 },
+ "vm:102": { "maxcpu": 2.0, "maxmem": 8589934592 },
+ "vm:103": { "maxcpu": 2.0, "maxmem": 8589934592 },
+ "vm:104": { "maxcpu": 2.0, "maxmem": 8589934592 }
+}
--
2.47.3
next prev parent reply other threads:[~2026-11-12 9:47 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-12 9:44 [RFC PATCH-SERIES cluster/ha-manager/manager/proxmox{,-perl-rs} v2 00/19] fix #7993: implement weighted crs load balancing Dominik Rusovac
2026-11-12 9:44 ` [PATCH proxmox v2 01/19] resource-scheduling: fix typos Dominik Rusovac
2026-11-19 12:27 ` Daniel Kral
2026-11-12 9:44 ` [PATCH proxmox v2 02/19] resource-scheduling: scheduler: refine score_* docs Dominik Rusovac
2026-11-19 12:27 ` Daniel Kral
2026-11-19 12:47 ` Dominik Rusovac
2026-11-12 9:44 ` [PATCH proxmox v2 03/19] resource-scheduling: scheduler: abstract post-migration stats logic Dominik Rusovac
2026-11-19 12:28 ` Daniel Kral
2026-11-19 12:47 ` Dominik Rusovac
2026-11-12 9:44 ` [PATCH proxmox v2 04/19] fix #7993: resource-scheduling: node: add weighted node load Dominik Rusovac
2026-11-19 12:28 ` Daniel Kral
2026-11-19 12:50 ` Dominik Rusovac
2026-11-12 9:44 ` [PATCH proxmox v2 05/19] resource-scheduling: scheduler: make imbalance with candidate public Dominik Rusovac
2026-11-19 12:41 ` Daniel Kral
2026-11-19 12:52 ` Dominik Rusovac
2026-11-12 9:44 ` [PATCH proxmox v2 06/19] fix #7993: resource-scheduling: scheduler: add weights Dominik Rusovac
2026-11-19 12:40 ` Daniel Kral
2026-11-19 13:52 ` Dominik Rusovac
2026-11-12 9:44 ` [PATCH proxmox v2 07/19] workspace,resource-scheduling: add proptest as dev-dependency Dominik Rusovac
2026-11-12 9:44 ` [PATCH proxmox v2 08/19] resource-scheduling: scheduler: add property tests for weights Dominik Rusovac
2026-11-12 9:44 ` [PATCH proxmox-perl-rs v2 09/19] fix #7993: pve-rs: resource-scheduling: add scheduler options Dominik Rusovac
2026-11-19 12:45 ` Daniel Kral
2026-11-19 13:28 ` Dominik Rusovac
2026-11-12 9:44 ` [PATCH pve-cluster v2 10/19] fix #7993: datacenter config: ad ha-{cpu,mem}-weight crs options Dominik Rusovac
2026-11-12 9:44 ` [PATCH pve-manager v2 11/19] ui: form: crs options: make fine-tuning options advanced Dominik Rusovac
2026-11-12 9:44 ` [PATCH pve-manager v2 12/19] fix #7993: ui: form: crs options: add weights Dominik Rusovac
2026-11-12 9:44 ` [PATCH pve-ha-manager v2 13/19] manager: remove obsolete argument Dominik Rusovac
2026-11-12 9:44 ` [PATCH pve-ha-manager v2 14/19] manager: rename update_crs_scheduler_mod to update_crs_settings Dominik Rusovac
2026-11-12 9:44 ` [PATCH pve-ha-manager v2 15/19] manager: factor out crs option update helper Dominik Rusovac
2026-11-12 9:44 ` [PATCH pve-ha-manager v2 16/19] manager: log changes to crs settings Dominik Rusovac
2026-11-12 9:44 ` [PATCH pve-ha-manager v2 17/19] sim: hardware: allow changing datacenter settings at runtime Dominik Rusovac
2026-11-12 9:44 ` Dominik Rusovac [this message]
2026-11-12 9:44 ` [PATCH pve-ha-manager v2 19/19] test: add automatic rebalancing test cases with weights Dominik Rusovac
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261112094437.1951271-19-d.rusovac@proxmox.com \
--to=d.rusovac@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.