all lists on lists.proxmox.com
 help / color / mirror / Atom feed
From: Christoph Heiss <c.heiss@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH proxmox v4 05/30] installer-types: answer: add options for configuring management vlan
Date: Mon,  2 Nov 2026 13:45:11 +0100	[thread overview]
Message-ID: <20261102124539.1008075-6-c.heiss@proxmox.com> (raw)
In-Reply-To: <20261102124539.1008075-1-c.heiss@proxmox.com>

Adds a new subsection `vlan` in [network]. This allows for configuring a
bond for the management network interface during the installation.

E.g.

  [network.vlan]
  vid = 5

Although there is only one property to set (for now), use a dedicated
struct here too, in the same vein as `NetworkBondOptions`. Makes things
- a bit more equally structured and
- leaves open the option for easily adding new VLAN-specific options in
  the future, if needed.

Signed-off-by: Christoph Heiss <c.heiss@proxmox.com>
---
Changes v3 -> v4:
  *  restrict vlan range to 2-4094

Changes v2 -> v3:
  * new patch

 proxmox-installer-types/src/answer.rs | 73 +++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/proxmox-installer-types/src/answer.rs b/proxmox-installer-types/src/answer.rs
index 8482356c..c97f287a 100644
--- a/proxmox-installer-types/src/answer.rs
+++ b/proxmox-installer-types/src/answer.rs
@@ -593,6 +593,40 @@ impl NetworkBondOptions {
     }
 }
 
+#[cfg_attr(feature = "api-types", api(
+    properties: {
+        vid: {
+            type: Integer,
+            // 0 and 4095 are reserved, 1 is the untagged default PVID of VLAN-aware bridges on
+            // Linux.
+            minimum: 2,
+            maximum: 4094,
+            default: 0,
+        }
+    },
+))]
+#[derive(Clone, Debug, Deserialize, Serialize, PartialEq)]
+#[serde(rename_all = "kebab-case")]
+/// Options for setting up a VLAN configuration on the management interface.
+pub struct NetworkVlanOptions {
+    /// VLAN tag to configure.
+    pub vid: u16,
+}
+
+impl NetworkVlanOptions {
+    /// Verifies whether the VLAN configuration is valid.
+    pub fn verify(&self) -> Result<()> {
+        if self.vid < 2 || self.vid > 4094 {
+            bail!(
+                "VLAN id must be between 2 and 4094 inclusive, got {}",
+                self.vid
+            );
+        }
+
+        Ok(())
+    }
+}
+
 #[cfg_attr(feature = "api-types", api(
     properties: {
         filter: {
@@ -622,6 +656,9 @@ pub struct NetworkConfigFromAnswer {
     /// If set, sets up a Linux bond for the management interface.
     #[serde(default, skip_serializing_if = "Option::is_none")]
     pub bond: Option<NetworkBondOptions>,
+    /// If set, configures the given VLAN for the management interface.
+    #[serde(default, skip_serializing_if = "Option::is_none")]
+    pub vlan: Option<NetworkVlanOptions>,
 }
 
 #[cfg_attr(feature = "api-types", api)]
@@ -636,6 +673,9 @@ pub struct NetworkConfigFromDhcp {
     /// If set, sets up a Linux bond for the management interface.
     #[serde(default, skip_serializing_if = "Option::is_none")]
     pub bond: Option<NetworkBondOptions>,
+    /// If set, configures the given VLAN for the management interface.
+    #[serde(default, skip_serializing_if = "Option::is_none")]
+    pub vlan: Option<NetworkVlanOptions>,
 }
 
 #[cfg_attr(feature = "api-types", api(
@@ -672,6 +712,14 @@ impl NetworkConfig {
             Self::FromAnswer(answer) => answer.bond.as_ref(),
         }
     }
+
+    /// Returns the management network Linux bond options, if any.
+    pub const fn vlan(&self) -> Option<&NetworkVlanOptions> {
+        match self {
+            Self::FromDhcp(dhcp) => dhcp.vlan.as_ref(),
+            Self::FromAnswer(answer) => answer.vlan.as_ref(),
+        }
+    }
 }
 
 #[derive(Clone, Debug, Deserialize, Serialize, PartialEq)]
@@ -1715,4 +1763,29 @@ mod tests {
             "primary bond interface AB:12:CD:34:EF:56 must be a member of the bond (members: 12:34:56:AB:CD:DF, AB:CD:DF:12:34:56)"
         );
     }
+
+    #[test]
+    fn network_vlan_id_must_be_valid() {
+        let mut vlan = NetworkVlanOptions { vid: 2 };
+        assert!(vlan.verify().is_ok());
+
+        vlan.vid = 4094;
+        assert!(vlan.verify().is_ok());
+
+        vlan.vid = 1;
+        let res = vlan.verify();
+        assert!(res.is_err());
+        assert_eq!(
+            res.unwrap_err().to_string(),
+            "VLAN id must be between 2 and 4094 inclusive, got 1"
+        );
+
+        vlan.vid = 4095;
+        let res = vlan.verify();
+        assert!(res.is_err());
+        assert_eq!(
+            res.unwrap_err().to_string(),
+            "VLAN id must be between 2 and 4094 inclusive, got 4095"
+        );
+    }
 }
-- 
2.55.0





  parent reply	other threads:[~2026-11-02 12:46 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-02 12:45 [PATCH installer/proxmox v4 00/30] fix #2164: add bond setup across all installers Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 01/30] installer-types: clippy: use .is_multiple_of() instead of manual modulo Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 02/30] installer-types: use `MacAddress` type where applicable Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 03/30] installer-types: derive Display for RebootMode and FilterMatch Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 04/30] installer-types: answer: add options for configuring management bond Christoph Heiss
2026-11-02 12:45 ` Christoph Heiss [this message]
2026-11-02 12:45 ` [PATCH proxmox v4 06/30] installer-types: bump fetch schema for bond and VLAN answer options Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 07/30] installer-types: bump version to 0.3.0-1 Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 08/30] network-api: derive Display and FromStr for network bond types Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 09/30] install: run make tidy Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 10/30] tree-wide: use `MacAddress` type instead of string for MAC addresses Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 11/30] install: factor out ifupdown2 config generation into own subroutine Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 12/30] install: do not rely on interface name map to be fully populated Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 13/30] install: config: add option for setting up bond on management interface Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 14/30] install: config: add option for setting up vlan " Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 15/30] install: network: set up management bond if requested Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 16/30] install: network: set up vlan on management interface " Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 17/30] gui: network: factor out name pinning into advanced options dialog Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 18/30] gui: network: add bond setup options to " Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 19/30] gui: network: add vlan setup options to advanced network dialog Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 20/30] auto: pass through management network bond options to low-level installer Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 21/30] auto: pass through management network vlan " Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 22/30] tui: drop long obsolete comment about logo formatting Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 23/30] tui: views: add widget for displaying a group of checkboxes Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 24/30] tui: network: factor out name pinning into advanced options dialog Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 25/30] tui: network: add bond setup options to advanced network dialog Christoph Heiss
2026-11-02 14:55   ` Lukas Sichert
2026-11-02 12:45 ` [PATCH installer v4 26/30] tui: network: add vlan " Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 27/30] gui: network: split advanced options dialog into tabs Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 28/30] tui: " Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 29/30] gui: network: list bond member candidates sharing a MAC address once Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 30/30] tui: " Christoph Heiss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261102124539.1008075-6-c.heiss@proxmox.com \
    --to=c.heiss@proxmox.com \
    --cc=pve-devel@lists.proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal