From: Christoph Heiss <c.heiss@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH installer v4 24/30] tui: network: factor out name pinning into advanced options dialog
Date: Mon, 2 Nov 2026 13:45:30 +0100 [thread overview]
Message-ID: <20261102124539.1008075-25-c.heiss@proxmox.com> (raw)
In-Reply-To: <20261102124539.1008075-1-c.heiss@proxmox.com>
This dialog can now be easily extended with additional panels for other,
advanced network-related options.
Signed-off-by: Christoph Heiss <c.heiss@proxmox.com>
---
Changes v3 -> v4:
* no changes
Changes v2 -> v3:
* no changes
Changes v1 -> v2:
* no changes
proxinstall | 4 +-
proxmox-tui-installer/src/views/network.rs | 272 +++++++++++----------
2 files changed, 140 insertions(+), 136 deletions(-)
diff --git a/proxinstall b/proxinstall
index 2622871..079b227 100755
--- a/proxinstall
+++ b/proxinstall
@@ -395,12 +395,12 @@ my sub create_network_interface_pin_frame {
my $enable_checkbox = Gtk3::CheckButton->new('Pin network interface names');
$enable_checkbox->set_active($gtk_state->{network_pinning_enabled});
- $vbox->pack_start($enable_checkbox, 1, 0, 5);
+ $vbox->pack_start($enable_checkbox, 0, 0, 5);
my $grid = Gtk3::Grid->new();
$grid->set_column_spacing(10);
$grid->set_row_spacing(10);
- $vbox->pack_start($grid, 1, 1, 5);
+ $vbox->pack_start($grid, 0, 0, 5);
my $interfaces = Proxmox::Install::RunEnv::get()->{network}->{interfaces};
my $mapping = Proxmox::Install::Config::get_network_interface_pin_map();
diff --git a/proxmox-tui-installer/src/views/network.rs b/proxmox-tui-installer/src/views/network.rs
index 6401174..f040881 100644
--- a/proxmox-tui-installer/src/views/network.rs
+++ b/proxmox-tui-installer/src/views/network.rs
@@ -1,8 +1,9 @@
+use anyhow::{Result, anyhow, bail};
use cursive::{
Cursive, View,
view::{Nameable, Resizable, ViewWrapper},
views::{
- Button, Checkbox, Dialog, DummyView, EditView, LinearLayout, NamedView, ResizedView,
+ Button, Checkbox, Dialog, DummyView, EditView, LinearLayout, NamedView, Panel, ResizedView,
ScrollView, SelectView, TextView,
},
};
@@ -22,10 +23,10 @@ use proxmox_network_types::{MacAddress, fqdn::Fqdn, ip_address::Cidr};
use super::{CidrAddressEditView, FormView};
struct NetworkViewOptions {
- selected_mac: MacAddress,
pinning_enabled: bool,
- // For UI purposes, we want to always save the mapping, to save the state
- // between toggling the checkbox
+ interfaces: Vec<Interface>,
+ // For UI purposes, we want to always save the state for the below options, even if not enabled
+ // by the user - to preserve the state between toggling the checkbox
pinning_options: NetworkInterfacePinningOptions,
}
@@ -40,32 +41,29 @@ pub struct NetworkOptionsView {
}
impl NetworkOptionsView {
- const PINNING_OPTIONS_BUTTON_NAME: &str = "network-pinning-options-button";
+ const FORM_VIEW_NAME: &str = "network-management-form";
const MGMT_IFNAME_SELECTVIEW_NAME: &str = "network-management-ifname-selectview";
+ const ADVANCED_OPTIONS_BUTTON_NAME: &str = "network-pinning-options-button";
+
+ const INTERFACE_PINNING_VIEW_NAME: &str = "network-name-pinning-view";
pub fn new(options: &NetworkOptions, network_info: &NetworkInfo) -> Self {
- let mut ifaces = network_info
+ let mut interfaces = network_info
.interfaces
.values()
- .collect::<Vec<&Interface>>();
+ .cloned()
+ .collect::<Vec<Interface>>();
// First, sort interfaces by their link state and then name
- ifaces.sort_unstable_by_key(|x| (&x.state, &x.name));
-
- let selected_mac = network_info
- .interfaces
- .get(&options.ifname)
- .map(|iface| iface.mac)
- .unwrap_or_else(|| ifaces.first().expect("at least one network interface").mac);
+ interfaces.sort_unstable_by(|a, b| (&a.state, &a.name).cmp(&(&b.state, &b.name)));
let options_ref = Arc::new(Mutex::new(NetworkViewOptions {
- selected_mac,
pinning_enabled: options.pinning_opts.is_some(),
+ interfaces,
pinning_options: options.pinning_opts.clone().unwrap_or_default(),
}));
- let iface_selection =
- Self::build_mgmt_ifname_selectview(ifaces.clone(), options_ref.clone());
+ let iface_selection = Self::build_mgmt_ifname_selectview(options_ref.clone(), None);
let form = FormView::<()>::new()
.child(
@@ -89,36 +87,13 @@ impl NetworkOptionsView {
EditView::new().content(options.dns_server.to_string()),
);
- let pinning_checkbox = LinearLayout::horizontal()
- .child(Checkbox::new().checked().on_change({
- let ifaces = ifaces
- .iter()
- .map(|iface| (*iface).clone())
- .collect::<Vec<Interface>>();
- let options_ref = options_ref.clone();
- move |siv, enable_pinning| {
- siv.call_on_name(Self::PINNING_OPTIONS_BUTTON_NAME, {
- let options_ref = options_ref.clone();
- move |view: &mut Button| {
- view.set_enabled(enable_pinning);
-
- options_ref.lock().expect("unpoisoned lock").pinning_enabled =
- enable_pinning;
- }
- });
-
- Self::refresh_ifname_selectview(siv, &ifaces, options_ref.clone());
- }
- }))
- .child(TextView::new(" Pin network interface names").no_wrap())
+ let advanced_options = LinearLayout::horizontal()
.child(DummyView.full_width())
.child(
- Button::new("Pinning options", {
+ Button::new("Advanced options", {
let options_ref = options_ref.clone();
- let network_info = network_info.clone();
move |siv| {
- let mut view =
- Self::custom_name_mapping_view(&network_info, options_ref.clone());
+ let mut view = Self::advanced_options_view(options_ref.clone());
// Pre-compute the child's layout, since it might depend on the size. Without this,
// the view will be empty until focused.
@@ -128,13 +103,13 @@ impl NetworkOptionsView {
siv.add_layer(view);
}
})
- .with_name(Self::PINNING_OPTIONS_BUTTON_NAME),
+ .with_name(Self::ADVANCED_OPTIONS_BUTTON_NAME),
);
let view = LinearLayout::vertical()
- .child(form)
+ .child(form.with_name(Self::FORM_VIEW_NAME))
.child(DummyView.full_width())
- .child(pinning_checkbox);
+ .child(advanced_options);
Self {
view,
@@ -145,13 +120,10 @@ impl NetworkOptionsView {
pub fn get_values(&mut self) -> Result<NetworkOptions, String> {
let form = self
.view
- .get_child(0)
- .and_then(|v| v.downcast_ref::<FormView>())
- .ok_or("failed to retrieve network options form")?;
-
- let iface = form
- .get_value::<NamedView<SelectView<Interface>>, _>(0)
- .ok_or("failed to retrieve management interface name")?;
+ .get_child_mut(0)
+ .and_then(|v| v.downcast_mut::<NamedView<FormView>>())
+ .ok_or("failed to retrieve network options form")?
+ .get_mut();
let fqdn = form
.get_value::<EditView, _>(1)
@@ -208,83 +180,69 @@ impl NetworkOptionsView {
}
}
- fn custom_name_mapping_view(
- network_info: &NetworkInfo,
- options_ref: NetworkViewOptionsRef,
- ) -> impl View {
- const DIALOG_NAME: &str = "network-interface-name-pinning-dialog";
+ fn advanced_options_view(options_ref: NetworkViewOptionsRef) -> impl View {
+ let inner = ScrollView::new(
+ LinearLayout::vertical().child(Panel::new(
+ InterfacePinningOptionsView::new(options_ref.clone())
+ .with_name(Self::INTERFACE_PINNING_VIEW_NAME),
+ )),
+ );
- let mut interfaces = network_info
- .interfaces
- .values()
- .collect::<Vec<&Interface>>();
-
- interfaces.sort_by(|a, b| (&a.state, &a.name).cmp(&(&b.state, &b.name)));
-
- Dialog::around(InterfacePinningOptionsView::new(
- &interfaces,
- options_ref.clone(),
- ))
- .title("Interface Name Pinning Options")
- .button("Ok", {
- let interfaces = interfaces
- .iter()
- .map(|v| (*v).clone())
- .collect::<Vec<Interface>>();
- move |siv| {
- let options = siv
- .call_on_name(DIALOG_NAME, |view: &mut Dialog| {
- view.get_content_mut()
- .downcast_mut::<InterfacePinningOptionsView>()
- .map(InterfacePinningOptionsView::get_values)
- })
- .flatten();
-
- let options = match options {
- Some(Ok(options)) => options,
- Some(Err(err)) => {
- siv.add_layer(Dialog::info(err));
- return;
+ Dialog::around(inner)
+ .title("Advanced Network Options")
+ .button("Ok", {
+ move |siv| {
+ match Self::get_view_values(siv) {
+ Ok(pin_opts) => {
+ siv.pop_layer();
+ let options = &mut options_ref.lock().expect("unpoisoned lock");
+ options.pinning_options = pin_opts;
+ }
+ Err(err) => {
+ siv.pop_layer();
+ siv.add_layer(Dialog::info(err.to_string()));
+ return;
+ }
}
- None => {
- siv.add_layer(Dialog::info(
- "Failed to retrieve network interface name pinning options view",
- ));
- return;
- }
- };
- siv.pop_layer();
- options_ref.lock().expect("unpoisoned lock").pinning_options = options;
-
- Self::refresh_ifname_selectview(siv, &interfaces, options_ref.clone());
- }
- })
- .with_name(DIALOG_NAME)
- .max_size((80, 40))
+ Self::refresh_ifname_selectview(siv, options_ref.clone());
+ }
+ })
+ .max_size((80, 40))
}
- fn refresh_ifname_selectview(
- siv: &mut Cursive,
- ifaces: &[Interface],
- options_ref: NetworkViewOptionsRef,
- ) {
+ fn get_view_values(siv: &mut Cursive) -> Result<NetworkInterfacePinningOptions> {
+ let pin_opts = siv
+ .call_on_name(
+ Self::INTERFACE_PINNING_VIEW_NAME,
+ InterfacePinningOptionsView::get_values,
+ )
+ .unwrap_or_else(|| {
+ bail!("failed to retrieve network interface name pinning options")
+ })?;
+
+ Ok(pin_opts)
+ }
+
+ fn refresh_ifname_selectview(siv: &mut Cursive, options_ref: NetworkViewOptionsRef) {
siv.call_on_name(
Self::MGMT_IFNAME_SELECTVIEW_NAME,
|view: &mut SelectView<Interface>| {
- *view = Self::build_mgmt_ifname_selectview(ifaces.iter().collect(), options_ref);
+ let selected_mac = view.selection().map(|iface| iface.mac);
+ *view = Self::build_mgmt_ifname_selectview(options_ref, selected_mac);
},
);
}
fn build_mgmt_ifname_selectview(
- ifaces: Vec<&Interface>,
options_ref: NetworkViewOptionsRef,
+ selected_mac: Option<MacAddress>,
) -> SelectView<Interface> {
let options = options_ref.lock().expect("unpoisoned lock");
// Map all interfaces to a list of (human-readable interface name, [Interface]) pairs
- let ifnames = ifaces
+ let ifnames = options
+ .interfaces
.iter()
.map(|iface| {
if options.pinning_enabled
@@ -297,20 +255,20 @@ impl NetworkOptionsView {
})
.collect::<Vec<(String, Interface)>>();
- let mut view = SelectView::new()
- .popup()
- .with_all(ifnames.clone())
- .on_submit({
- let options_ref = options_ref.clone();
- move |_, iface| {
- options_ref.lock().expect("unpoisoned lock").selected_mac = iface.mac;
- }
- });
+ let mut view = SelectView::new().popup().with_all(ifnames.clone());
+
+ let selected_mac = selected_mac.unwrap_or_else(|| {
+ options
+ .interfaces
+ .first()
+ .expect("at least one network interface")
+ .mac
+ });
// Finally, (try to) select the current one
let selected = view
.iter()
- .position(|(_label, iface)| iface.mac == options.selected_mac)
+ .position(|(_label, iface)| iface.mac == selected_mac)
.unwrap_or(0); // we sort UP interfaces first, so select the first UP interface
//
view.set_selection(selected);
@@ -324,19 +282,44 @@ impl ViewWrapper for NetworkOptionsView {
}
struct InterfacePinningOptionsView {
- view: ScrollView<NamedView<FormView<MacAddress>>>,
+ view: LinearLayout,
}
impl InterfacePinningOptionsView {
+ const ENABLED_CHECKBOX_NAME: &str = "network-interface-name-pinning-enabled";
const FORM_NAME: &str = "network-interface-name-pinning-form";
- fn new(interfaces: &[&Interface], options_ref: NetworkViewOptionsRef) -> Self {
+ fn new(options_ref: NetworkViewOptionsRef) -> Self {
let options = options_ref.lock().expect("unpoisoned lock");
// Filter out all non-physical links, as it does not make sense to pin their names
// in this way.
// The low-level installer will skip them anyway.
- let interfaces = interfaces.iter().filter(|iface| iface.pinned_id.is_some());
+ let interfaces = options
+ .interfaces
+ .iter()
+ .filter(|iface| iface.pinned_id.is_some());
+
+ let mut view = LinearLayout::vertical()
+ .child(
+ LinearLayout::horizontal()
+ .child(
+ Checkbox::new()
+ .with_checked(options.pinning_enabled)
+ .on_change({
+ let options_ref = options_ref.clone();
+ move |siv, enabled| {
+ options_ref.lock().expect("unpoisoned lock").pinning_enabled =
+ enabled;
+
+ Self::toggle_all(siv, enabled);
+ }
+ })
+ .with_name(Self::ENABLED_CHECKBOX_NAME),
+ )
+ .child(TextView::new(" Pin network interface names").no_wrap()),
+ )
+ .child(DummyView::new());
let mut form = FormView::<MacAddress>::new();
@@ -356,7 +339,7 @@ impl InterfacePinningOptionsView {
.expect("always pinnable interface")
.name,
)
- .max_content_width(MAX_IFNAME_LEN)
+ .with_enabled(options.pinning_enabled)
.fixed_width(MAX_IFNAME_LEN),
);
@@ -375,13 +358,31 @@ impl InterfacePinningOptionsView {
}
}
- Self {
- view: ScrollView::new(form.with_name(Self::FORM_NAME)),
- }
+ view.add_child(form.with_name(Self::FORM_NAME));
+
+ Self { view }
}
- fn get_values(&mut self) -> Result<NetworkInterfacePinningOptions, String> {
- let form = self.view.get_inner_mut().get_mut();
+ fn toggle_all(siv: &mut Cursive, enabled: bool) {
+ siv.call_on_name(Self::FORM_NAME, |v: &mut FormView<MacAddress>| {
+ v.call_on_childs(&|v: &mut LinearLayout| {
+ if let Some(v) = v
+ .get_child_mut(1)
+ .and_then(|v| v.downcast_mut::<ResizedView<EditView>>())
+ {
+ v.get_inner_mut().set_enabled(enabled);
+ }
+ });
+ });
+ }
+
+ fn get_values(&mut self) -> Result<NetworkInterfacePinningOptions> {
+ let form = self
+ .view
+ .get_child_mut(2)
+ .and_then(|v| v.downcast_mut::<NamedView<FormView<MacAddress>>>())
+ .ok_or(anyhow!("failed to retrieve interface pinning form"))?
+ .get_mut();
let mut mapping = HashMap::new();
@@ -395,18 +396,21 @@ impl InterfacePinningOptionsView {
.get_child(1)
.and_then(|v| v.downcast_ref::<ResizedView<EditView>>())
.map(|v| v.get_inner().get_content())
- .ok_or_else(|| format!("failed to retrieve pinning ID for interface {}", mac))?;
+ .ok_or(anyhow!(
+ "failed to retrieve pinning ID for interface {}",
+ mac
+ ))?;
mapping.insert(*mac, (*name).clone());
}
let opts = NetworkInterfacePinningOptions { mapping };
- opts.verify().map_err(|err| err.to_string())?;
+ opts.verify()?;
Ok(opts)
}
}
impl ViewWrapper for InterfacePinningOptionsView {
- cursive::wrap_impl!(self.view: ScrollView<NamedView<FormView<MacAddress>>>);
+ cursive::wrap_impl!(self.view: LinearLayout);
}
--
2.55.0
next prev parent reply other threads:[~2026-11-02 12:49 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-02 12:45 [PATCH installer/proxmox v4 00/30] fix #2164: add bond setup across all installers Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 01/30] installer-types: clippy: use .is_multiple_of() instead of manual modulo Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 02/30] installer-types: use `MacAddress` type where applicable Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 03/30] installer-types: derive Display for RebootMode and FilterMatch Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 04/30] installer-types: answer: add options for configuring management bond Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 05/30] installer-types: answer: add options for configuring management vlan Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 06/30] installer-types: bump fetch schema for bond and VLAN answer options Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 07/30] installer-types: bump version to 0.3.0-1 Christoph Heiss
2026-11-02 12:45 ` [PATCH proxmox v4 08/30] network-api: derive Display and FromStr for network bond types Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 09/30] install: run make tidy Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 10/30] tree-wide: use `MacAddress` type instead of string for MAC addresses Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 11/30] install: factor out ifupdown2 config generation into own subroutine Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 12/30] install: do not rely on interface name map to be fully populated Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 13/30] install: config: add option for setting up bond on management interface Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 14/30] install: config: add option for setting up vlan " Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 15/30] install: network: set up management bond if requested Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 16/30] install: network: set up vlan on management interface " Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 17/30] gui: network: factor out name pinning into advanced options dialog Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 18/30] gui: network: add bond setup options to " Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 19/30] gui: network: add vlan setup options to advanced network dialog Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 20/30] auto: pass through management network bond options to low-level installer Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 21/30] auto: pass through management network vlan " Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 22/30] tui: drop long obsolete comment about logo formatting Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 23/30] tui: views: add widget for displaying a group of checkboxes Christoph Heiss
2026-11-02 12:45 ` Christoph Heiss [this message]
2026-11-02 12:45 ` [PATCH installer v4 25/30] tui: network: add bond setup options to advanced network dialog Christoph Heiss
2026-11-02 14:55 ` Lukas Sichert
2026-11-02 12:45 ` [PATCH installer v4 26/30] tui: network: add vlan " Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 27/30] gui: network: split advanced options dialog into tabs Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 28/30] tui: " Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 29/30] gui: network: list bond member candidates sharing a MAC address once Christoph Heiss
2026-11-02 12:45 ` [PATCH installer v4 30/30] tui: " Christoph Heiss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261102124539.1008075-25-c.heiss@proxmox.com \
--to=c.heiss@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.