* [PATCH proxmox v2] sendmail: conform more to mime Content-Disposition header and wrap lines
@ 2026-02-19 14:58 Shannon Sterz
0 siblings, 0 replies; only message in thread
From: Shannon Sterz @ 2026-02-19 14:58 UTC (permalink / raw)
To: pbs-devel
the http and mime Content-Disposition headers function slightly
differently. for the http version the following would be valid
according to rfc 6266 [1]:
Content-Disposition: attachment; filename="file.pdf";
filename*=UTF-8''file.pdf
specifying multiple filename attributes like this isn't valid for mime
messages. according to rfc 2183 [2] the above should be expressed like
so for mime messages (one variant, multiple are supported):
Content-Disposition: attachment;
filename*0*=UTF-8''file.bin
while rfc 2183 [2] would in theory allow for multiple filename
parameters similar to rfc 6266, in practice MIME::Tools [2] considers
this as ambigous content [3]. in more recent versions of Proxmox Mail
Gateway, such messages are rejected [4].
this patch implements proper filename handling and also wraps
filenames in the content disposition and content type headers
appropriatelly to a mail being rejected due to having mime headers
that are too long as described in rfcs 2231 [5] and 2045 [6].
[1]: https://datatracker.ietf.org/doc/html/rfc6266/
[2]: https://datatracker.ietf.org/doc/html/rfc2183#section-2
[3]: https://metacpan.org/pod/MIME::Head#ambiguous_content
[4]:
https://git.proxmox.com/?p=pmg-api.git;a=commitdiff;h=66f51c62f789b4c20308b7594fbbb357721b0844
[5]: https://datatracker.ietf.org/doc/html/rfc2231#section-7
[6]: https://datatracker.ietf.org/doc/html/rfc2045/#section-6.8
Signed-off-by: Shannon Sterz <s.sterz@proxmox.com>
---
tested this with peat on the following muas:
* aerc
* thunderbird
* ios mail app
* canary mail app
* start mail web client
* gmail web client
* outlook web client
noticed this when peat suddenly struggled to send mails. thanks @ Stoiko
Ivanov for helping with analysing this issue.
Changelog:
---------
* wrap lines more correctly ensuring that encoded lines don't exceed 76
chars (thanks @ Stoiko Ivanov)
* refactored the wrapping logic to be more general
proxmox-sendmail/src/lib.rs | 167 ++++++++++++++++++++++++++++--------
1 file changed, 129 insertions(+), 38 deletions(-)
diff --git a/proxmox-sendmail/src/lib.rs b/proxmox-sendmail/src/lib.rs
index f5b04afd..ec8488a4 100644
--- a/proxmox-sendmail/src/lib.rs
+++ b/proxmox-sendmail/src/lib.rs
@@ -44,23 +44,83 @@ const RFC5987SET: &AsciiSet = &CONTROLS
/// base64 encode and hard-wrap the base64 encoded string every 72 characters. this improves
/// compatibility.
fn encode_base64_formatted<T: AsRef<[u8]>>(raw: T) -> String {
- const TEXT_WIDTH: usize = 72;
-
let encoded = proxmox_base64::encode(raw);
- let bytes = encoded.as_bytes();
- let lines = bytes.len().div_ceil(TEXT_WIDTH);
- let mut out = Vec::with_capacity(bytes.len() + lines - 1); // account for 1 newline per line
+ format_text(&encoded, |_| "".into(), "", 0, true)
+}
- for (line, chunk) in bytes.chunks(TEXT_WIDTH).enumerate() {
+fn encode_filename_formatted(filename: &str) -> String {
+ let encoded = format!("UTF-8''{}", utf8_percent_encode(filename, RFC5987SET));
+
+ let format_prefix = |l| {
+ if let Some(l) = l {
+ format!("\tfilename*{l}*=")
+ } else {
+ "\tfilename*NN*=".into()
+ }
+ };
+
+ format_text(&encoded, format_prefix, ";", 0, true)
+}
+
+fn format_text<F>(
+ text: &str,
+ prefix: F,
+ suffix: &str,
+ shorten_first: usize,
+ skip_last_suffix: bool,
+) -> String
+where
+ F: Fn(Option<usize>) -> String,
+{
+ const DEFAULT_TEXT_WIDTH: usize = 72;
+
+ let bytes = text.as_bytes();
+ let suffix = suffix.as_bytes();
+
+ let format_text_len = suffix.len() + prefix(None).len();
+ let lines = (bytes.len() + shorten_first).div_ceil(DEFAULT_TEXT_WIDTH - format_text_len);
+
+ // bytes + formatting and "\n" per line - no "\n" in the last line
+ let mut capacity = bytes.len() + (format_text_len + 1) * lines - 1;
+
+ if skip_last_suffix {
+ capacity -= suffix.len();
+ }
+
+ let mut out = Vec::with_capacity(capacity);
+ let first_line_length = DEFAULT_TEXT_WIDTH - shorten_first - format_text_len;
+
+ let (total_lines, bytes) =
+ if let Some((first, rest)) = bytes.split_at_checked(first_line_length) {
+ out.extend_from_slice(prefix(Some(0)).as_bytes());
+ out.extend_from_slice(first);
+ out.extend_from_slice(suffix);
+ if !rest.is_empty() {
+ out.push(b'\n');
+ }
+ (1, rest)
+ } else {
+ (0, bytes)
+ };
+
+ for (line, chunk) in bytes
+ .chunks(DEFAULT_TEXT_WIDTH - format_text_len)
+ .enumerate()
+ {
+ let line = line + total_lines;
+ out.extend_from_slice(prefix(Some(line)).as_bytes());
out.extend_from_slice(chunk);
+
if line + 1 != lines {
- // do not end last line with newline to give caller control over doing so.
+ out.extend_from_slice(suffix);
out.push(b'\n');
+ } else if !skip_last_suffix {
+ out.extend_from_slice(suffix);
}
}
- // SAFETY: base64 encoded, which is 7-bit chars (ASCII) and thus always valid UTF8
+ // SAFETY: all input slices were valid utf-8 string slices
unsafe { String::from_utf8_unchecked(out) }
}
@@ -104,24 +164,41 @@ impl Attachment<'_> {
let mut attachment = String::new();
- let encoded_filename = if self.filename.is_ascii() {
- &self.filename
- } else {
- &format!("=?utf-8?B?{}?=", proxmox_base64::encode(&self.filename))
- };
-
let _ = writeln!(attachment, "\n--{file_boundary}");
- let _ = writeln!(
- attachment,
- "Content-Type: {}; name=\"{encoded_filename}\"",
- self.mime,
- );
- // both `filename` and `filename*` are included for additional compatibility
+ let _ = write!(attachment, "Content-Type: {};\n\tname=\"", self.mime);
+
+ if self.filename.is_ascii() {
+ let _ = write!(attachment, "{}", &self.filename);
+ } else {
+ let encoded = proxmox_base64::encode(&self.filename);
+ let prefix_fn = |line| {
+ if Some(0) == line {
+ "=?utf-8?B?"
+ } else {
+ "\t=?utf-8?B?"
+ }
+ .into()
+ };
+
+ // minus one here as the first line isn't indented
+ let skip_first = "\tname=\"".len() - 1;
+
+ let _ = write!(
+ attachment,
+ "{}",
+ format_text(&encoded, prefix_fn, "?=", skip_first, false)
+ );
+ }
+
+ // should be fine to add one here, the last line should be at most 72 chars. according to
+ // rfc 2045 encoded output lines should be "no more than 76 characters each"
+ let _ = writeln!(attachment, "\"");
+
let _ = writeln!(
attachment,
- "Content-Disposition: attachment; filename=\"{encoded_filename}\";\n\tfilename*=UTF-8''{}",
- utf8_percent_encode(&self.filename, RFC5987SET)
+ "Content-Disposition: attachment;\n{}",
+ encode_filename_formatted(&self.filename)
);
attachment.push_str("Content-Transfer-Encoding: base64\n\n");
@@ -809,9 +886,10 @@ Content-Transfer-Encoding: 7bit
Lorem Ipsum Dolor Sit
Amet
------_=_NextPart_001_1732806251
-Content-Type: application/octet-stream; name="deadbeef.bin"
-Content-Disposition: attachment; filename="deadbeef.bin";
- filename*=UTF-8''deadbeef.bin
+Content-Type: application/octet-stream;
+ name="deadbeef.bin"
+Content-Disposition: attachment;
+ filename*0*=UTF-8''deadbeef.bin
Content-Transfer-Encoding: base64
3q2+796tvu/erb7v3q3erb7v3q2+796tvu/erd6tvu/erb7v3q2+796t3q2+796tvu/erb7v
@@ -838,7 +916,7 @@ Content-Transfer-Encoding: base64
)
.with_recipient_and_name("Receiver Name", "receiver@example.com")
.with_attachment("deadbeef.bin", "application/octet-stream", &bin)
- .with_attachment("🐄💀.bin", "image/bmp", &bin)
+ .with_attachment("🐄💀🐄💀🐄💀🐄💀🐄💀🐄💀🐄💀🐄💀🐄💀🐄💀🐄💀🐄💀🐄💀🐄💀🐄💀🐄💀.bin", "image/bmp", &bin)
.with_html_alt("<html lang=\"de-at\"><head></head><body>\n\t<pre>\n\t\tLorem Ipsum Dolor Sit Amet\n\t</pre>\n</body></html>");
let body = mail.format_mail(1732806251).expect("could not format mail");
@@ -879,17 +957,28 @@ Content-Transfer-Encoding: 7bit
</body></html>
------_=_NextPart_002_1732806251--
------_=_NextPart_001_1732806251
-Content-Type: application/octet-stream; name="deadbeef.bin"
-Content-Disposition: attachment; filename="deadbeef.bin";
- filename*=UTF-8''deadbeef.bin
+Content-Type: application/octet-stream;
+ name="deadbeef.bin"
+Content-Disposition: attachment;
+ filename*0*=UTF-8''deadbeef.bin
Content-Transfer-Encoding: base64
3q2+796tvu/erb7v3q3erb7v3q2+796tvu/erd6tvu/erb7v3q2+796t3q2+796tvu/erb7v
3q2+796tvu8=
------_=_NextPart_001_1732806251
-Content-Type: image/bmp; name="=?utf-8?B?8J+QhPCfkoAuYmlu?="
-Content-Disposition: attachment; filename="=?utf-8?B?8J+QhPCfkoAuYmlu?=";
- filename*=UTF-8''%F0%9F%90%84%F0%9F%92%80.bin
+Content-Type: image/bmp;
+ name="=?utf-8?B?8J+QhPCfkoDwn5CE8J+SgPCfkITwn5KA8J+QhPCfkoDwn5CE8J+Sg?=
+ =?utf-8?B?PCfkITwn5KA8J+QhPCfkoDwn5CE8J+SgPCfkITwn5KA8J+QhPCfkoDwn5CE?=
+ =?utf-8?B?8J+SgPCfkITwn5KA8J+QhPCfkoDwn5CE8J+SgPCfkITwn5KA8J+QhPCfkoA?=
+ =?utf-8?B?uYmlu?="
+Content-Disposition: attachment;
+ filename*0*=UTF-8''%F0%9F%90%84%F0%9F%92%80%F0%9F%90%84%F0%9F%92%80%F;
+ filename*1*=0%9F%90%84%F0%9F%92%80%F0%9F%90%84%F0%9F%92%80%F0%9F%90%8;
+ filename*2*=4%F0%9F%92%80%F0%9F%90%84%F0%9F%92%80%F0%9F%90%84%F0%9F%9;
+ filename*3*=2%80%F0%9F%90%84%F0%9F%92%80%F0%9F%90%84%F0%9F%92%80%F0%9;
+ filename*4*=F%90%84%F0%9F%92%80%F0%9F%90%84%F0%9F%92%80%F0%9F%90%84%F;
+ filename*5*=0%9F%92%80%F0%9F%90%84%F0%9F%92%80%F0%9F%90%84%F0%9F%92%8;
+ filename*6*=0%F0%9F%90%84%F0%9F%92%80%F0%9F%90%84%F0%9F%92%80.bin
Content-Transfer-Encoding: base64
3q2+796tvu/erb7v3q3erb7v3q2+796tvu/erd6tvu/erb7v3q2+796t3q2+796tvu/erb7v
@@ -997,17 +1086,19 @@ PGh0bWwgbGFuZz0iZGUtYXQiPjxoZWFkPjwvaGVhZD48Ym9keT4KCTxwcmU+CgkJTG9yZW0g
SXBzdW0gRMO2bG9yIFNpdCBBbWV0Cgk8L3ByZT4KPC9ib2R5PjwvaHRtbD4=
------_=_NextPart_002_1732806251--
------_=_NextPart_001_1732806251
-Content-Type: application/octet-stream; name="deadbeef.bin"
-Content-Disposition: attachment; filename="deadbeef.bin";
- filename*=UTF-8''deadbeef.bin
+Content-Type: application/octet-stream;
+ name="deadbeef.bin"
+Content-Disposition: attachment;
+ filename*0*=UTF-8''deadbeef.bin
Content-Transfer-Encoding: base64
3q2+796tvu/erb7v3q3erb7v3q2+796tvu/erd6tvu/erb7v3q2+796t3q2+796tvu/erb7v
3q2+796tvu8=
------_=_NextPart_001_1732806251
-Content-Type: image/bmp; name="=?utf-8?B?8J+QhPCfkoAuYmlu?="
-Content-Disposition: attachment; filename="=?utf-8?B?8J+QhPCfkoAuYmlu?=";
- filename*=UTF-8''%F0%9F%90%84%F0%9F%92%80.bin
+Content-Type: image/bmp;
+ name="=?utf-8?B?8J+QhPCfkoAuYmlu?="
+Content-Disposition: attachment;
+ filename*0*=UTF-8''%F0%9F%90%84%F0%9F%92%80.bin
Content-Transfer-Encoding: base64
3q2+796tvu/erb7v3q3erb7v3q2+796tvu/erd6tvu/erb7v3q2+796t3q2+796tvu/erb7v
--
2.47.3
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-02-19 14:59 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-02-19 14:58 [PATCH proxmox v2] sendmail: conform more to mime Content-Disposition header and wrap lines Shannon Sterz
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.