From: "Michael Köppl" <m.koeppl@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [pve-devel] [PATCH installer v2 0/6] add early disk and network sanity checks
Date: Tue, 29 Apr 2025 16:09:34 +0200 [thread overview]
Message-ID: <20250429140940.161711-1-m.koeppl@proxmox.com> (raw)
The goal of this series is to add additional sanity checks to the
auto-installer and the TUI and GUI installers. The following checks were
added:
* Btrfs / ZFS RAID: check if the required number of disks is available
* LVM: check if swapsize < hdsize
* LVM: check if maxroot < hdsize/4
* Duplicate disks in answer file disk selection
* Networking: check if IPv4 address is valid within subnet (RFC)
The disk-related checks aim to close [0], whereas the IPv4 check would
partially close [1].
[0] https://bugzilla.proxmox.com/show_bug.cgi?id=5887
[1] https://bugzilla.proxmox.com/show_bug.cgi?id=5757
Changes since v1:
- Removed rustfmt patch
- Removed patch that changed check_zfs_raid_config (replaced with patch
below)
- Added patch that moves implementation of RAID setup checks to
implementation of ZfsRaidLevel and BtrfsRaidLevel
- Adapted tests for RAID setup validity
- Added configured values in GiB to error messages for invalid
swapsize and maxroot
- Changed maximum allowed swapsize to hdsize/8
- De-duplicated swapsize and maxroot check implementations in
autoinstaller utils and common's disk_checks
- Added patch that adds a check for duplicate disks in answer file disk
selection
- Refactored Display implementation of CidrAddressParseError
- Simplified Deserialize implementation of CidrAddress
- Explicitly allow /31 and /32 subnets in CIDR validity check
Thanks to @Christoph for reviewing v1 and his suggestions.
pve-installer:
Michael Köppl (6):
auto: add early answer file sanity check for RAID configurations
move RAID setup checks to RAID level enum implementations
close #5887: add sanity check for LVM swapsize and maxroot
auto: add check for duplicate disks in answer file
common: add more descriptive errors for invalid network configs
common: add checks for valid subnet mask and IPv4 address within
subnet
Proxmox/Install.pm | 16 ++
proxinstall | 5 +-
proxmox-auto-install-assistant/src/main.rs | 7 +-
proxmox-auto-installer/src/utils.rs | 46 ++++-
proxmox-auto-installer/tests/parse-answer.rs | 12 +-
.../parse_answer/ipv4_and_subnet_31.json | 19 ++
.../parse_answer/ipv4_and_subnet_31.toml | 18 ++
.../btrfs_raid_single_disk.json | 3 +
.../btrfs_raid_single_disk.toml | 15 ++
.../parse_answer_fail/duplicate_disk.json | 3 +
.../parse_answer_fail/duplicate_disk.toml | 15 ++
.../ipv4_and_subnet_addr_is_network.json | 3 +
.../ipv4_and_subnet_addr_is_network.toml | 18 ++
.../ipv4_and_subnet_mask_33.json | 3 +
.../ipv4_and_subnet_mask_33.toml | 18 ++
.../lvm_maxroot_greater_than_maximum.json | 3 +
.../lvm_maxroot_greater_than_maximum.toml | 16 ++
.../lvm_swapsize_greater_than_hdsize.json | 3 +
.../lvm_swapsize_greater_than_hdsize.toml | 16 ++
.../zfs_raid_single_disk.json | 3 +
.../zfs_raid_single_disk.toml | 15 ++
proxmox-installer-common/src/disk_checks.rs | 174 +++++++-----------
proxmox-installer-common/src/options.rs | 91 +++++++++
proxmox-installer-common/src/utils.rs | 84 +++++++--
proxmox-tui-installer/src/views/bootdisk.rs | 13 +-
25 files changed, 482 insertions(+), 137 deletions(-)
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/ipv4_and_subnet_31.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/ipv4_and_subnet_31.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/btrfs_raid_single_disk.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/btrfs_raid_single_disk.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/duplicate_disk.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/duplicate_disk.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/ipv4_and_subnet_addr_is_network.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/ipv4_and_subnet_addr_is_network.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/ipv4_and_subnet_mask_33.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/ipv4_and_subnet_mask_33.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/lvm_maxroot_greater_than_maximum.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/lvm_maxroot_greater_than_maximum.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/lvm_swapsize_greater_than_hdsize.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/lvm_swapsize_greater_than_hdsize.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/zfs_raid_single_disk.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/zfs_raid_single_disk.toml
Summary over all repositories:
25 files changed, 482 insertions(+), 137 deletions(-)
--
Generated by git-murpp 0.8.0
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
next reply other threads:[~2025-04-29 14:10 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-29 14:09 Michael Köppl [this message]
2025-04-29 14:09 ` [pve-devel] [PATCH pve-installer v2 1/6] auto: add early answer file sanity check for RAID configurations Michael Köppl
2025-04-29 14:09 ` [pve-devel] [PATCH pve-installer v2 2/6] move RAID setup checks to RAID level enum implementations Michael Köppl
2025-04-29 14:09 ` [pve-devel] [PATCH pve-installer v2 3/6] close #5887: add sanity check for LVM swapsize and maxroot Michael Köppl
2025-05-06 11:48 ` Christoph Heiss
2025-05-09 11:07 ` Michael Köppl
2025-05-27 16:19 ` Michael Köppl
2025-04-29 14:09 ` [pve-devel] [PATCH pve-installer v2 4/6] auto: add check for duplicate disks in answer file Michael Köppl
2025-04-29 14:09 ` [pve-devel] [PATCH pve-installer v2 5/6] common: add more descriptive errors for invalid network configs Michael Köppl
2025-04-29 14:09 ` [pve-devel] [RFC PATCH pve-installer v2 6/6] common: add checks for valid subnet mask and IPv4 address within subnet Michael Köppl
2025-05-06 9:21 ` Christoph Heiss
2025-05-09 8:51 ` Michael Köppl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250429140940.161711-1-m.koeppl@proxmox.com \
--to=m.koeppl@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal