From: Philipp Giersfeld <philipp.giersfeld@canarybit.eu>
To: pve-devel@lists.proxmox.com
Subject: [pve-devel] [PATCH qemu-server v5 3/4] config: add AMD SEV-SNP support.
Date: Mon, 31 Mar 2025 15:59:30 +0200 [thread overview]
Message-ID: <20250331135931.50568-4-philipp.giersfeld@canarybit.eu> (raw)
In-Reply-To: <20250331135931.50568-1-philipp.giersfeld@canarybit.eu>
This patch is for enabling AMD SEV-SNP support.
Where applicable, it extends support for existing SEV(-ES) variables
to SEV-SNP. This means that it retains no-debug and kernel-hashes
options, but the no-key-sharing option is removed.
The default policy value is identical to QEMU’s, and the therefore
required option has been added to configure SMT support.
The code was tested by running a VM without SEV, with SEV, SEV-ES,
SEV-SNP. Each configuration was tested with and without an EFI disk
attached. For SEV-enabled configurations it was also verified that the
kernel actually used the respective feature.
Signed-off-by: Philipp Giersfeld <philipp.giersfeld@canarybit.eu>
Tested-by: Markus Frank <m.frank@proxmox.com>
---
no changes since last version
PVE/API2/Qemu.pm | 7 +++-
PVE/QemuServer.pm | 52 +++++++++++++++++++++--------
PVE/QemuServer/CPUConfig.pm | 66 ++++++++++++++++++++++++++++---------
3 files changed, 95 insertions(+), 30 deletions(-)
diff --git a/PVE/API2/Qemu.pm b/PVE/API2/Qemu.pm
index 295260e7..ef3aa8d6 100644
--- a/PVE/API2/Qemu.pm
+++ b/PVE/API2/Qemu.pm
@@ -548,8 +548,13 @@ my sub create_disks : prototype($$$$$$$$$$$) {
my $volid;
if ($ds eq 'efidisk0') {
my $smm = PVE::QemuServer::Machine::machine_type_is_q35($conf);
+
+ my $amd_sev_type = PVE::QemuServer::CPUConfig::get_amd_sev_type($conf);
+ die "SEV-SNP uses consolidated read-only firmware and does not require an EFI disk\n"
+ if $amd_sev_type && $amd_sev_type eq 'snp';
+
($volid, $size) = PVE::QemuServer::create_efidisk(
- $storecfg, $storeid, $vmid, $fmt, $arch, $disk, $smm);
+ $storecfg, $storeid, $vmid, $fmt, $arch, $disk, $smm, $amd_sev_type);
} elsif ($ds eq 'tpmstate0') {
# swtpm can only use raw volumes, and uses a fixed size
$size = PVE::Tools::convert_size(PVE::QemuServer::Drive::TPMSTATE_DISK_SIZE, 'b' => 'kb');
diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm
index 808c0e1c..727aad6c 100644
--- a/PVE/QemuServer.pm
+++ b/PVE/QemuServer.pm
@@ -52,7 +52,7 @@ use PVE::QemuConfig;
use PVE::QemuServer::Helpers qw(config_aware_timeout min_version kvm_user_version windows_version);
use PVE::QemuServer::Cloudinit;
use PVE::QemuServer::CGroup;
-use PVE::QemuServer::CPUConfig qw(print_cpu_device get_cpu_options get_cpu_bitness is_native_arch get_amd_sev_object);
+use PVE::QemuServer::CPUConfig qw(print_cpu_device get_cpu_options get_cpu_bitness is_native_arch get_amd_sev_object get_amd_sev_type);
use PVE::QemuServer::Drive qw(is_valid_drivename checked_volume_format drive_is_cloudinit drive_is_cdrom drive_is_read_only parse_drive print_drive);
use PVE::QemuServer::Machine;
use PVE::QemuServer::Memory qw(get_current_memory);
@@ -88,6 +88,13 @@ my $OVMF = {
"$EDK2_FW_BASE/OVMF_CODE_4M.secboot.fd",
"$EDK2_FW_BASE/OVMF_VARS_4M.ms.fd",
],
+ '4m-sev' => [
+ "$EDK2_FW_BASE/OVMF_CVM_CODE_4M.fd",
+ "$EDK2_FW_BASE/OVMF_CVM_VARS_4M.fd",
+ ],
+ '4m-snp' => [
+ "$EDK2_FW_BASE/OVMF_CVM_4M.fd",
+ ],
# FIXME: These are legacy 2MB-sized images that modern OVMF doesn't supports to build
# anymore. how can we deperacate this sanely without breaking existing instances, or using
# older backups and snapshot?
@@ -3172,15 +3179,22 @@ sub vga_conf_has_spice {
return $1 || 1;
}
-sub get_ovmf_files($$$) {
- my ($arch, $efidisk, $smm) = @_;
+sub get_ovmf_files($$$$) {
+ my ($arch, $efidisk, $smm, $amd_sev_type) = @_;
my $types = $OVMF->{$arch}
or die "no OVMF images known for architecture '$arch'\n";
my $type = 'default';
if ($arch eq 'x86_64') {
- if (defined($efidisk->{efitype}) && $efidisk->{efitype} eq '4m') {
+ if ($amd_sev_type && $amd_sev_type eq 'snp') {
+ $type = "4m-snp";
+ my ($ovmf) = $types->{$type}->@*;
+ die "EFI base image '$ovmf' not found\n" if ! -f $ovmf;
+ return ($ovmf);
+ } elsif ($amd_sev_type) {
+ $type = "4m-sev";
+ } elsif (defined($efidisk->{efitype}) && $efidisk->{efitype} eq '4m') {
$type = $smm ? "4m" : "4m-no-smm";
$type .= '-ms' if $efidisk->{'pre-enrolled-keys'};
} else {
@@ -3329,7 +3343,10 @@ my sub print_ovmf_drive_commandlines {
my $d = $conf->{efidisk0} ? parse_drive('efidisk0', $conf->{efidisk0}) : undef;
- my ($ovmf_code, $ovmf_vars) = get_ovmf_files($arch, $d, $q35);
+ my $amd_sev_type = get_amd_sev_type($conf);
+ die "Attempting to configure SEV-SNP with flash devices instead of using `-bios`\n"
+ if $amd_sev_type && $amd_sev_type eq 'snp';
+ my ($ovmf_code, $ovmf_vars) = get_ovmf_files($arch, $d, $q35, $amd_sev_type);
my $var_drive_str = "if=pflash,unit=1,id=drive-efidisk0";
if ($d) {
@@ -3526,10 +3543,18 @@ sub config_to_command {
die "OVMF (UEFI) BIOS is not supported on 32-bit CPU types\n"
if !$forcecpu && get_cpu_bitness($conf->{cpu}, $arch) == 32;
- my ($code_drive_str, $var_drive_str) =
- print_ovmf_drive_commandlines($conf, $storecfg, $vmid, $arch, $q35, $version_guard);
- push $cmd->@*, '-drive', $code_drive_str;
- push $cmd->@*, '-drive', $var_drive_str;
+ my $amd_sev_type = get_amd_sev_type($conf);
+ if ($amd_sev_type && $amd_sev_type eq 'snp') {
+ my $arch = PVE::QemuServer::Helpers::get_vm_arch($conf);
+ print "Existing EFI disk will be ignored for SEV-SNP\n"
+ if parse_drive('efidisk0', $conf->{efidisk0});
+ push $cmd->@*, '-bios', get_ovmf_files($arch, undef, undef, $amd_sev_type);
+ } else {
+ my ($code_drive_str, $var_drive_str) = print_ovmf_drive_commandlines(
+ $conf, $storecfg, $vmid, $arch, $q35, $version_guard);
+ push $cmd->@*, '-drive', $code_drive_str;
+ push $cmd->@*, '-drive', $var_drive_str;
+ }
}
if ($q35) { # tell QEMU to load q35 config early
@@ -8337,7 +8362,8 @@ sub get_efivars_size {
my $arch = PVE::QemuServer::Helpers::get_vm_arch($conf);
$efidisk //= $conf->{efidisk0} ? parse_drive('efidisk0', $conf->{efidisk0}) : undef;
my $smm = PVE::QemuServer::Machine::machine_type_is_q35($conf);
- my (undef, $ovmf_vars) = get_ovmf_files($arch, $efidisk, $smm);
+ my $amd_sev_type = get_amd_sev_type($conf);
+ my (undef, $ovmf_vars) = get_ovmf_files($arch, $efidisk, $smm, $amd_sev_type);
return -s $ovmf_vars;
}
@@ -8361,10 +8387,10 @@ sub update_tpmstate_size {
$conf->{tpmstate0} = print_drive($disk);
}
-sub create_efidisk($$$$$$$) {
- my ($storecfg, $storeid, $vmid, $fmt, $arch, $efidisk, $smm) = @_;
+sub create_efidisk($$$$$$$$) {
+ my ($storecfg, $storeid, $vmid, $fmt, $arch, $efidisk, $smm, $amd_sev_type) = @_;
- my (undef, $ovmf_vars) = get_ovmf_files($arch, $efidisk, $smm);
+ my (undef, $ovmf_vars) = get_ovmf_files($arch, $efidisk, $smm, $amd_sev_type);
my $vars_size_b = -s $ovmf_vars;
my $vars_size = PVE::Tools::convert_size($vars_size_b, 'b' => 'kb');
diff --git a/PVE/QemuServer/CPUConfig.pm b/PVE/QemuServer/CPUConfig.pm
index ad0be16e..9ae1996b 100644
--- a/PVE/QemuServer/CPUConfig.pm
+++ b/PVE/QemuServer/CPUConfig.pm
@@ -18,6 +18,7 @@ get_cpu_options
get_cpu_bitness
is_native_arch
get_amd_sev_object
+get_amd_sev_type
);
# under certain race-conditions, this module might be loaded before pve-cluster
@@ -231,25 +232,32 @@ my $cpu_fmt = {
my $sev_fmt = {
type => {
description => "Enable standard SEV with type='std' or enable"
- ." experimental SEV-ES with the 'es' option.",
+ ." experimental SEV-ES with the 'es' option or enable"
+ ." experimental SEV-SNP with the 'snp' option.",
type => 'string',
default_key => 1,
format_description => "sev-type",
- enum => ['std', 'es'],
+ enum => ['std', 'es', 'snp'],
maxLength => 3,
},
'no-debug' => {
- description => "Sets policy bit 0 to 1 to disallow debugging of guest",
+ description => "Sets policy bit to disallow debugging of guest",
type => 'boolean',
default => 0,
optional => 1,
},
'no-key-sharing' => {
- description => "Sets policy bit 1 to 1 to disallow key sharing with other guests",
+ description => "Sets policy bit to disallow key sharing with other guests (Ignored for SEV-SNP)",
type => 'boolean',
default => 0,
optional => 1,
},
+ 'allow-smt' => {
+ description => "Sets policy bit to allow Simultaneous Multi Threading (SMT) (Ignored unless for SEV-SNP)",
+ type => 'boolean',
+ default => 1,
+ optional => 1,
+ },
"kernel-hashes" => {
description => "Add kernel hashes to guest firmware for measured linux kernel launch",
type => 'boolean',
@@ -823,6 +831,13 @@ sub get_hw_capabilities {
}
return $hw_capabilities;
}
+sub get_amd_sev_type {
+ my ($conf) = @_;
+
+ return undef if !$conf->{'amd-sev'};
+
+ return PVE::JSONSchema::parse_property_string($sev_fmt, $conf->{'amd-sev'})->{type};
+}
sub get_amd_sev_object {
my ($amd_sev, $bios) = @_;
@@ -836,22 +851,41 @@ sub get_amd_sev_object {
if ($amd_sev_conf->{type} eq 'es' && !$sev_hw_caps->{'sev-support-es'}) {
die "Your CPU does not support AMD SEV-ES.\n";
}
+ if ($amd_sev_conf->{type} eq 'snp' && !$sev_hw_caps->{'sev-support-snp'}) {
+ die "Your CPU does not support AMD SEV-SNP.\n";
+ }
if (!$bios || $bios ne 'ovmf') {
die "To use AMD SEV, you need to change the BIOS to OVMF.\n";
}
- my $sev_mem_object = 'sev-guest,id=sev0';
- $sev_mem_object .= ',cbitpos='.$sev_hw_caps->{cbitpos};
- $sev_mem_object .= ',reduced-phys-bits='.$sev_hw_caps->{'reduced-phys-bits'};
-
- # guest policy bit calculation as described here:
- # https://documentation.suse.com/sles/15-SP5/html/SLES-amd-sev/article-amd-sev.html#table-guestpolicy
- my $policy = 0;
- $policy |= 1 << 0 if $amd_sev_conf->{'no-debug'};
- $policy |= 1 << 1 if $amd_sev_conf->{'no-key-sharing'};
- $policy |= 1 << 2 if $amd_sev_conf->{type} eq 'es';
- # disable migration with bit 3 nosend to prevent amd-sev-migration-attack
- $policy |= 1 << 3;
+ my $sev_mem_object = '';
+ my $policy;
+ if ($amd_sev_conf->{type} eq 'es' || $amd_sev_conf->{type} eq 'std') {
+ $sev_mem_object .= 'sev-guest,id=sev0';
+ $sev_mem_object .= ',cbitpos='.$sev_hw_caps->{cbitpos};
+ $sev_mem_object .= ',reduced-phys-bits='.$sev_hw_caps->{'reduced-phys-bits'};
+
+ # guest policy bit calculation as described here:
+ # https://documentation.suse.com/sles/15-SP5/html/SLES-amd-sev/article-amd-sev.html#table-guestpolicy
+ $policy = 0;
+ $policy |= 1 << 0 if $amd_sev_conf->{'no-debug'};
+ $policy |= 1 << 1 if $amd_sev_conf->{'no-key-sharing'};
+ $policy |= 1 << 2 if $amd_sev_conf->{type} eq 'es';
+ # disable migration with bit 3 nosend to prevent amd-sev-migration-attack
+ $policy |= 1 << 3;
+ } elsif ($amd_sev_conf->{type} eq 'snp') {
+ $sev_mem_object .= 'sev-snp-guest,id=sev0';
+ $sev_mem_object .= ',cbitpos='.$sev_hw_caps->{cbitpos};
+ $sev_mem_object .= ',reduced-phys-bits='.$sev_hw_caps->{'reduced-phys-bits'};
+
+ # guest policy bit calculation as described in chapter 4.3:
+ # https://www.amd.com/system/files/TechDocs/56860.pdf
+ # Reserved bit must be one
+ $policy = 1 << 17;
+ $policy |= 1 << 16 if !defined($amd_sev_conf->{'allow-smt'}) || $amd_sev_conf->{'allow-smt'};
+ $policy |= 1 << 19 if !$amd_sev_conf->{'no-debug'};
+ }
+
$sev_mem_object .= ',policy='.sprintf("%#x", $policy);
$sev_mem_object .= ',kernel-hashes=on' if ($amd_sev_conf->{'kernel-hashes'});
--
2.39.5
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
next prev parent reply other threads:[~2025-03-31 14:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-31 13:59 [pve-devel] [PATCH edk2-firmware/qemu-server/manager v5 0/4] AMD SEV-SNP Philipp Giersfeld
2025-03-31 13:59 ` [pve-devel] [PATCH edk2-firmware v5 1/4] Add OVMF targets for AMD SEV-ES and SEV-SNP Philipp Giersfeld
2025-04-03 16:43 ` [pve-devel] applied: " Thomas Lamprecht
2025-03-31 13:59 ` [pve-devel] [PATCH qemu-server v5 2/4] Convert policy calculation Philipp Giersfeld
2025-04-03 19:45 ` [pve-devel] applied: " Thomas Lamprecht
2025-03-31 13:59 ` Philipp Giersfeld [this message]
2025-04-03 19:46 ` [pve-devel] applied: [PATCH qemu-server v5 3/4] config: add AMD SEV-SNP support Thomas Lamprecht
2025-03-31 13:59 ` [pve-devel] [PATCH pve-manager v5 4/4] Add configuration options for AMD SEV-SNP Philipp Giersfeld
2025-04-02 10:15 ` Markus Frank
2025-04-04 16:46 ` [pve-devel] applied: " Thomas Lamprecht
2025-04-02 15:49 ` [pve-devel] [PATCH edk2-firmware/qemu-server/manager v5 0/4] " Daniel Kral
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250331135931.50568-4-philipp.giersfeld@canarybit.eu \
--to=philipp.giersfeld@canarybit.eu \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal