From: Stefan Hanreich <s.hanreich@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [pve-devel] [PATCH proxmox-ve-rs v3 03/24] firewall: add ip range types
Date: Tue, 12 Nov 2024 13:25:41 +0100 [thread overview]
Message-ID: <20241112122602.88598-4-s.hanreich@proxmox.com> (raw)
In-Reply-To: <20241112122602.88598-1-s.hanreich@proxmox.com>
Currently we are using tuples to represent IP ranges which is
suboptimal. Validation logic and invariant checking needs to happen at
every site using the IP range rather than having a unified struct for
enforcing those invariants.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
---
.../src/firewall/types/address.rs | 230 +++++++++++++++++-
1 file changed, 228 insertions(+), 2 deletions(-)
diff --git a/proxmox-ve-config/src/firewall/types/address.rs b/proxmox-ve-config/src/firewall/types/address.rs
index e48ac1b..f7bde51 100644
--- a/proxmox-ve-config/src/firewall/types/address.rs
+++ b/proxmox-ve-config/src/firewall/types/address.rs
@@ -1,9 +1,9 @@
-use std::fmt;
+use std::fmt::{self, Display};
use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};
use std::ops::Deref;
use anyhow::{bail, format_err, Error};
-use serde_with::DeserializeFromStr;
+use serde_with::{DeserializeFromStr, SerializeDisplay};
#[derive(Clone, Copy, Debug, Eq, PartialEq)]
pub enum Family {
@@ -239,6 +239,202 @@ impl<T: Into<Ipv6Addr>> From<T> for Ipv6Cidr {
}
}
+#[derive(Clone, Copy, Debug, PartialOrd, Ord, PartialEq, Eq, Hash)]
+pub enum IpRangeError {
+ MismatchedFamilies,
+ StartGreaterThanLast,
+ InvalidFormat,
+}
+
+impl std::error::Error for IpRangeError {}
+
+impl Display for IpRangeError {
+ fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
+ f.write_str(match self {
+ IpRangeError::MismatchedFamilies => "mismatched ip address families",
+ IpRangeError::StartGreaterThanLast => "start is greater than last",
+ IpRangeError::InvalidFormat => "invalid ip range format",
+ })
+ }
+}
+
+/// Represents a range of IPv4 or IPv6 addresses.
+///
+/// For more information see [`AddressRange`]
+#[derive(Clone, Copy, Debug, PartialEq, Eq, SerializeDisplay, DeserializeFromStr)]
+pub enum IpRange {
+ V4(AddressRange<Ipv4Addr>),
+ V6(AddressRange<Ipv6Addr>),
+}
+
+impl IpRange {
+ /// Returns the family of the IpRange.
+ pub fn family(&self) -> Family {
+ match self {
+ IpRange::V4(_) => Family::V4,
+ IpRange::V6(_) => Family::V6,
+ }
+ }
+
+ /// Creates a new [`IpRange`] from two [`IpAddr`].
+ ///
+ /// # Errors
+ ///
+ /// This function will return an error if start and last IP address are not from the same family.
+ pub fn new(start: impl Into<IpAddr>, last: impl Into<IpAddr>) -> Result<Self, IpRangeError> {
+ match (start.into(), last.into()) {
+ (IpAddr::V4(start), IpAddr::V4(last)) => Self::new_v4(start, last),
+ (IpAddr::V6(start), IpAddr::V6(last)) => Self::new_v6(start, last),
+ _ => Err(IpRangeError::MismatchedFamilies),
+ }
+ }
+
+ /// construct a new Ipv4 Range
+ pub fn new_v4(
+ start: impl Into<Ipv4Addr>,
+ last: impl Into<Ipv4Addr>,
+ ) -> Result<Self, IpRangeError> {
+ Ok(IpRange::V4(AddressRange::new_v4(start, last)?))
+ }
+
+ pub fn new_v6(
+ start: impl Into<Ipv6Addr>,
+ last: impl Into<Ipv6Addr>,
+ ) -> Result<Self, IpRangeError> {
+ Ok(IpRange::V6(AddressRange::new_v6(start, last)?))
+ }
+}
+
+impl std::str::FromStr for IpRange {
+ type Err = IpRangeError;
+
+ fn from_str(s: &str) -> Result<Self, Self::Err> {
+ if let Ok(range) = s.parse() {
+ return Ok(IpRange::V4(range));
+ }
+
+ if let Ok(range) = s.parse() {
+ return Ok(IpRange::V6(range));
+ }
+
+ Err(IpRangeError::InvalidFormat)
+ }
+}
+
+impl fmt::Display for IpRange {
+ fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
+ match self {
+ IpRange::V4(range) => range.fmt(f),
+ IpRange::V6(range) => range.fmt(f),
+ }
+ }
+}
+
+/// Represents a range of IP addresses from start to last.
+///
+/// This type is for encapsulation purposes for the [`IpRange`] enum and should be instantiated via
+/// that enum.
+///
+/// # Invariants
+///
+/// * start and last have the same IP address family
+/// * start is less than or equal to last
+///
+/// # Textual representation
+///
+/// Two IP addresses separated by a hyphen, e.g.: `127.0.0.1-127.0.0.255`
+#[derive(Clone, Copy, Debug, PartialEq, Eq)]
+pub struct AddressRange<T> {
+ start: T,
+ last: T,
+}
+
+impl AddressRange<Ipv4Addr> {
+ pub(crate) fn new_v4(
+ start: impl Into<Ipv4Addr>,
+ last: impl Into<Ipv4Addr>,
+ ) -> Result<AddressRange<Ipv4Addr>, IpRangeError> {
+ let (start, last) = (start.into(), last.into());
+
+ if start > last {
+ return Err(IpRangeError::StartGreaterThanLast);
+ }
+
+ Ok(Self { start, last })
+ }
+}
+
+impl AddressRange<Ipv6Addr> {
+ pub(crate) fn new_v6(
+ start: impl Into<Ipv6Addr>,
+ last: impl Into<Ipv6Addr>,
+ ) -> Result<AddressRange<Ipv6Addr>, IpRangeError> {
+ let (start, last) = (start.into(), last.into());
+
+ if start > last {
+ return Err(IpRangeError::StartGreaterThanLast);
+ }
+
+ Ok(Self { start, last })
+ }
+}
+
+impl<T> AddressRange<T> {
+ pub fn start(&self) -> &T {
+ &self.start
+ }
+
+ pub fn last(&self) -> &T {
+ &self.last
+ }
+}
+
+impl std::str::FromStr for AddressRange<Ipv4Addr> {
+ type Err = IpRangeError;
+
+ fn from_str(s: &str) -> Result<Self, Self::Err> {
+ if let Some((start, last)) = s.split_once('-') {
+ let start_address = start
+ .parse::<Ipv4Addr>()
+ .map_err(|_| IpRangeError::InvalidFormat)?;
+
+ let last_address = last
+ .parse::<Ipv4Addr>()
+ .map_err(|_| IpRangeError::InvalidFormat)?;
+
+ return Self::new_v4(start_address, last_address);
+ }
+
+ Err(IpRangeError::InvalidFormat)
+ }
+}
+
+impl std::str::FromStr for AddressRange<Ipv6Addr> {
+ type Err = IpRangeError;
+
+ fn from_str(s: &str) -> Result<Self, Self::Err> {
+ if let Some((start, last)) = s.split_once('-') {
+ let start_address = start
+ .parse::<Ipv6Addr>()
+ .map_err(|_| IpRangeError::InvalidFormat)?;
+
+ let last_address = last
+ .parse::<Ipv6Addr>()
+ .map_err(|_| IpRangeError::InvalidFormat)?;
+
+ return Self::new_v6(start_address, last_address);
+ }
+
+ Err(IpRangeError::InvalidFormat)
+ }
+}
+
+impl<T: fmt::Display> fmt::Display for AddressRange<T> {
+ fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
+ write!(f, "{}-{}", self.start, self.last)
+ }
+}
+
#[derive(Clone, Debug)]
#[cfg_attr(test, derive(Eq, PartialEq))]
pub enum IpEntry {
@@ -612,4 +808,34 @@ mod tests {
])
.expect_err("cannot mix ip families in ip list");
}
+
+ #[test]
+ fn test_ip_range() {
+ IpRange::new([10, 0, 0, 2], [10, 0, 0, 1]).unwrap_err();
+
+ IpRange::new(
+ [0x2001, 0x0db8, 0, 0, 0, 0, 0, 0x1000],
+ [0x2001, 0x0db8, 0, 0, 0, 0, 0, 0],
+ )
+ .unwrap_err();
+
+ let v4_range = IpRange::new([10, 0, 0, 0], [10, 0, 0, 100]).unwrap();
+ assert_eq!(v4_range.family(), Family::V4);
+
+ let v6_range = IpRange::new(
+ [0x2001, 0x0db8, 0, 0, 0, 0, 0, 0],
+ [0x2001, 0x0db8, 0, 0, 0, 0, 0, 0x1000],
+ )
+ .unwrap();
+ assert_eq!(v6_range.family(), Family::V6);
+
+ "10.0.0.1-10.0.0.100".parse::<IpRange>().unwrap();
+ "2001:db8::1-2001:db8::f".parse::<IpRange>().unwrap();
+
+ "10.0.0.1-2001:db8::1000".parse::<IpRange>().unwrap_err();
+ "2001:db8::1-192.168.0.2".parse::<IpRange>().unwrap_err();
+
+ "10.0.0.1-10.0.0.0".parse::<IpRange>().unwrap_err();
+ "2001:db8::1-2001:db8::0".parse::<IpRange>().unwrap_err();
+ }
}
--
2.39.5
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
next prev parent reply other threads:[~2024-11-12 12:26 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-12 12:25 [pve-devel] [PATCH docs/firewall/manager/proxmox{-ve-rs, -firewall, -perl-rs} v3 00/24] autogenerate ipsets for sdn objects Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 01/24] debian: add files for packaging Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 02/24] firewall: add sdn scope for ipsets Stefan Hanreich
2024-11-12 12:25 ` Stefan Hanreich [this message]
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 04/24] firewall: address: use new iprange type for ip entries Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 05/24] ipset: add range variant to addresses Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 06/24] iprange: add methods for converting an ip range to cidrs Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 07/24] ipset: address: add helper methods Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 08/24] firewall: guest: derive traits according to rust api guidelines Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 09/24] common: add allowlist Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 10/24] sdn: add name types Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 11/24] sdn: add ipam module Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 12/24] sdn: ipam: add method for generating ipsets Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 13/24] sdn: add config module Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 14/24] sdn: config: add method for generating ipsets Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 15/24] tests: add sdn config tests Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 16/24] tests: add ipam tests Stefan Hanreich
2024-11-12 19:16 ` [pve-devel] partially-applied-series: " Thomas Lamprecht
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-firewall v3 17/24] add proxmox-ve-rs crate - move proxmox-ve-config there Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-firewall v3 18/24] config: tests: add support for loading sdn and ipam config Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-firewall v3 19/24] ipsets: autogenerate ipsets for vnets and ipam Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH pve-firewall v3 20/24] add support for loading sdn firewall configuration Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH pve-firewall v3 21/24] api: load sdn ipsets Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH proxmox-perl-rs v3 22/24] add PVE::RS::Firewall::SDN module Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH pve-manager v3 23/24] firewall: add sdn scope to IPRefSelector Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH pve-docs v3 24/24] sdn: add documentation for firewall integration Stefan Hanreich
2024-11-15 9:29 ` [pve-devel] [PATCH docs/firewall/manager/proxmox{-ve-rs, -firewall, -perl-rs} v3 00/24] autogenerate ipsets for sdn objects Wolfgang Bumiller
2024-11-15 11:17 ` Hannes Duerr
2024-11-15 12:12 ` Stefan Hanreich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241112122602.88598-4-s.hanreich@proxmox.com \
--to=s.hanreich@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.