[pve-devel] [PATCH qemu] fix typos in user-visible strings

[Maximiliano Sandoval <m.sandoval@proxmox.com>]

This includes docs, and strings printed to stderr or stdout.

These were caught with:

    typos --exclude test --exclude changelog

Signed-off-by: Maximiliano Sandoval <m.sandoval@proxmox.com>
---
 PVE/API2/Qemu.pm      | 14 +++++++-------
 PVE/CLI/qm.pm         |  4 ++--
 PVE/QMPClient.pm      |  6 +++---
 PVE/QemuServer.pm     | 10 +++++-----
 PVE/QemuServer/OVF.pm |  4 ++--
 PVE/QemuServer/PCI.pm |  2 +-
 PVE/QemuServer/USB.pm |  2 +-
 7 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/PVE/API2/Qemu.pm b/PVE/API2/Qemu.pm
index d25a79fe..848001b6 100644
--- a/PVE/API2/Qemu.pm
+++ b/PVE/API2/Qemu.pm
@@ -801,7 +801,7 @@ __PACKAGE__->register_method({
     method => 'GET',
     description => "Virtual machine index (per node).",
     permissions => {
-	description => "Only list VMs where you have VM.Audit permissons on /vms/<vmid>.",
+	description => "Only list VMs where you have VM.Audit permissions on /vms/<vmid>.",
 	user => 'all',
     },
     proxyto => 'node',
@@ -1795,7 +1795,7 @@ my $update_vm_api  = sub {
 
 	my $conf = PVE::QemuConfig->load_config($vmid);
 
-	die "checksum missmatch (file change by other user?)\n"
+	die "checksum mismatch (file change by other user?)\n"
 	    if $digest && $digest ne $conf->{digest};
 
 	&$check_cpu_model_access($rpcenv, $authuser, $param, $conf);
@@ -2133,7 +2133,7 @@ __PACKAGE__->register_method({
     method => 'POST',
     protected => 1,
     proxyto => 'node',
-    description => "Set virtual machine options (asynchrounous API).",
+    description => "Set virtual machine options (asynchronous API).",
     permissions => {
 	check => ['perm', '/vms/{vmid}', $vm_config_perm_list, any => 1],
     },
@@ -2190,7 +2190,7 @@ __PACKAGE__->register_method({
     method => 'PUT',
     protected => 1,
     proxyto => 'node',
-    description => "Set virtual machine options (synchrounous API) - You should consider using the POST method instead for any actions involving hotplug or storage allocation.",
+    description => "Set virtual machine options (synchronous API) - You should consider using the POST method instead for any actions involving hotplug or storage allocation.",
     permissions => {
 	check => ['perm', '/vms/{vmid}', $vm_config_perm_list, any => 1],
     },
@@ -4488,11 +4488,11 @@ __PACKAGE__->register_method({
 	    not_allowed_nodes => {
 		type => 'object',
 		optional => 1,
-		description => "List not allowed nodes with additional informations, only passed if VM is offline"
+		description => "List not allowed nodes with additional information, only passed if VM is offline"
 	    },
 	    local_disks => {
 		type => 'array',
-		description => "List local disks including CD-Rom, unsused and not referenced disks"
+		description => "List local disks including CD-Rom, unused and not referenced disks"
 	    },
 	    local_resources => {
 		type => 'array',
@@ -5018,7 +5018,7 @@ __PACKAGE__->register_method({
 
             my $conf = PVE::QemuConfig->load_config($vmid);
 
-            die "checksum missmatch (file change by other user?)\n"
+            die "checksum mismatch (file change by other user?)\n"
                 if $digest && $digest ne $conf->{digest};
             PVE::QemuConfig->check_lock($conf) if !$skiplock;
 
diff --git a/PVE/CLI/qm.pm b/PVE/CLI/qm.pm
index d3dbf7b4..8d8ce10a 100755
--- a/PVE/CLI/qm.pm
+++ b/PVE/CLI/qm.pm
@@ -471,7 +471,7 @@ __PACKAGE__->register_method ({
 	my $pid = PVE::QemuServer::check_running ($vmid);
 	return if !$pid;
 
-	print "waiting until VM $vmid stopps (PID $pid)\n";
+	print "waiting until VM $vmid stops (PID $pid)\n";
 
 	my $count = 0;
 	while ((!$timeout || ($count < $timeout)) && PVE::QemuServer::check_running ($vmid)) {
@@ -807,7 +807,7 @@ __PACKAGE__->register_method({
 		type => 'boolean',
 		optional => 1,
 		default => 1,
-		description => "If set to off, returns the pid immediately instead of waiting for the commmand to finish or the timeout.",
+		description => "If set to off, returns the pid immediately instead of waiting for the command to finish or the timeout.",
 	    },
 	    'timeout' => {
 		type => 'integer',
diff --git a/PVE/QMPClient.pm b/PVE/QMPClient.pm
index a785d9a1..cf752e28 100644
--- a/PVE/QMPClient.pm
+++ b/PVE/QMPClient.pm
@@ -401,7 +401,7 @@ sub mux_input {
 	    my $obj = from_json($jsons[0]);
 
 	    my $cmdid = $obj->{'return'};
-	    die "received responsed without command id\n" if !$cmdid;
+	    die "received response without command id\n" if !$cmdid;
 
 	    # skip results fro previous commands
 	    return if $cmdid < $curcmd->{id};
@@ -440,7 +440,7 @@ sub mux_input {
 	    }
 
 	    my $cmdid = $obj->{id};
-	    die "received responsed without command id\n" if !$cmdid;
+	    die "received response without command id\n" if !$cmdid;
 
 	    if ($curcmd->{id} ne $cmdid) {
 		die "got wrong command id '$cmdid' (expected $curcmd->{id})\n";
@@ -495,7 +495,7 @@ sub mux_eof {
 	    my $obj = from_json($raw);
 
 	    my $cmdid = $obj->{'return'};
-	    die "received responsed without command id\n" if !$cmdid;
+	    die "received response without command id\n" if !$cmdid;
 
 	    delete $queue_info->{current};
 
diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm
index b26da505..2939605f 100644
--- a/PVE/QemuServer.pm
+++ b/PVE/QemuServer.pm
@@ -889,7 +889,7 @@ __EOD__
 
 my $net_fmt = {
     macaddr  => get_standard_option('mac-addr', {
-	description => "MAC address. That address must be unique withing your network. This is"
+	description => "MAC address. That address must be unique within your network. This is"
 	    ." automatically generated if not specified.",
     }),
     model => {
@@ -3100,7 +3100,7 @@ sub audio_devs {
 	push @$devs, '-device', "hda-micro,id=${id}-codec0,bus=${id}.0,cad=0$audiodev";
 	push @$devs, '-device', "hda-duplex,id=${id}-codec1,bus=${id}.0,cad=1$audiodev";
     } else {
-	die "unkown audio device '$audio->{dev}', implement me!";
+	die "unknown audio device '$audio->{dev}', implement me!";
     }
 
     push @$devs, '-audiodev', "$audio->{backend},id=$audio->{backend_id}";
@@ -6600,7 +6600,7 @@ sub tar_restore_cleanup {
 		    } else {
 			PVE::Storage::vdisk_free($storecfg, $volid);
 		    }
-		    print STDERR "temporary volume '$volid' sucessfuly removed\n";
+		    print STDERR "temporary volume '$volid' successfully removed\n";
 		};
 		print STDERR "unable to cleanup '$volid' - $@" if $@;
 	    } else {
@@ -6875,7 +6875,7 @@ my $restore_destroy_volumes = sub {
 	my $volid = $dev->{volid} or next;
 	eval {
 	    PVE::Storage::vdisk_free($storecfg, $volid);
-	    print STDERR "temporary volume '$volid' sucessfuly removed\n";
+	    print STDERR "temporary volume '$volid' successfully removed\n";
 	};
 	print STDERR "unable to cleanup '$volid' - $@" if $@;
     }
@@ -7829,7 +7829,7 @@ sub convert_iscsi_path {
 	       "file.portal=$portal,file.target=$target,file.lun=$lun,driver=raw";
     }
 
-    die "cannot convert iscsi path '$path', unkown format\n";
+    die "cannot convert iscsi path '$path', unknown format\n";
 }
 
 sub qemu_img_convert {
diff --git a/PVE/QemuServer/OVF.pm b/PVE/QemuServer/OVF.pm
index b97b0520..eb9cf8e8 100644
--- a/PVE/QemuServer/OVF.pm
+++ b/PVE/QemuServer/OVF.pm
@@ -167,7 +167,7 @@ sub parse_ovf {
 	    $disk_section_path = $1;
 	    $disk_id = $2;
 	} else {
-	   warn "invalid host ressource $host_resource, skipping\n";
+	   warn "invalid host resource $host_resource, skipping\n";
 	   next;
 	}
 	printf "disk section path: $disk_section_path and disk id: $disk_id\n" if $debug;
@@ -181,7 +181,7 @@ ovf:Disk[\@ovf:diskId='%s']/\@ovf:fileRef", $disk_id);
 
 	my $valid_url_chars = qr@${valid_uripath_chars}|/@;
 	if (!$fileref || $fileref !~ m/^${valid_url_chars}+$/) {
-	    warn "invalid host ressource $host_resource, skipping\n";
+	    warn "invalid host resource $host_resource, skipping\n";
 	    next;
 	}
 
diff --git a/PVE/QemuServer/PCI.pm b/PVE/QemuServer/PCI.pm
index 1673041b..3b0da39d 100644
--- a/PVE/QemuServer/PCI.pm
+++ b/PVE/QemuServer/PCI.pm
@@ -33,7 +33,7 @@ of PCI virtual functions of the host. HOSTPCIID syntax is:
 
 'bus:dev.func' (hexadecimal numbers)
 
-You can us the 'lspci' command to list existing PCI devices.
+You can use the 'lspci' command to list existing PCI devices.
 
 Either this or the 'mapping' key must be set.
 EODESCR
diff --git a/PVE/QemuServer/USB.pm b/PVE/QemuServer/USB.pm
index 49957444..017ef9c0 100644
--- a/PVE/QemuServer/USB.pm
+++ b/PVE/QemuServer/USB.pm
@@ -33,7 +33,7 @@ my $usb_fmt = {
 The Host USB device or port or the value 'spice'. HOSTUSBDEVICE syntax is:
 
  'bus-port(.port)*' (decimal numbers) or
- 'vendor_id:product_id' (hexadeciaml numbers) or
+ 'vendor_id:product_id' (hexadecimal numbers) or
  'spice'
 
 You can use the 'lsusb -t' command to list existing usb devices.
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel