From: Gabriel Goller <g.goller@proxmox.com>
To: pbs-devel@lists.proxmox.com
Subject: [pbs-devel] [PATCH proxmox-backup v4 4/4] api: switch from task_log! macro to tracing
Date: Wed, 17 Apr 2024 16:13:18 +0200 [thread overview]
Message-ID: <20240417141323.144861-5-g.goller@proxmox.com> (raw)
In-Reply-To: <20240417141323.144861-1-g.goller@proxmox.com>
Import `proxmox-log` and substitute all `task_log!`
(and task_warn!, task_error!) invocations with tracing calls (info!,
warn!, etc..). Remove worker references where it isn't necessary
anymore.
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
---
src/api2/admin/datastore.rs | 26 ++--
src/api2/config/acme.rs | 20 +--
src/api2/config/datastore.rs | 16 +-
src/api2/config/prune.rs | 14 +-
src/api2/node/apt.rs | 13 +-
src/api2/node/certificates.rs | 64 ++++----
src/api2/node/disks/directory.rs | 13 +-
src/api2/node/disks/mod.rs | 12 +-
src/api2/node/disks/zfs.rs | 30 ++--
src/api2/node/mod.rs | 11 +-
src/api2/pull.rs | 33 ++--
src/api2/tape/backup.rs | 72 ++++-----
src/api2/tape/drive.rs | 146 +++++++-----------
src/api2/tape/restore.rs | 254 ++++++++++---------------------
14 files changed, 264 insertions(+), 460 deletions(-)
diff --git a/src/api2/admin/datastore.rs b/src/api2/admin/datastore.rs
index 35628c59..2757da6e 100644
--- a/src/api2/admin/datastore.rs
+++ b/src/api2/admin/datastore.rs
@@ -13,6 +13,7 @@ use hyper::{header, Body, Response, StatusCode};
use serde::Deserialize;
use serde_json::{json, Value};
use tokio_stream::wrappers::ReceiverStream;
+use tracing::{info, warn};
use proxmox_async::blocking::WrappedReaderStream;
use proxmox_async::{io::AsyncChannelWriter, stream::AsyncReaderStream};
@@ -26,7 +27,6 @@ use proxmox_sortable_macro::sortable;
use proxmox_sys::fs::{
file_read_firstline, file_read_optional_string, replace_file, CreateOptions,
};
-use proxmox_sys::{task_log, task_warn};
use pxar::accessor::aio::Accessor;
use pxar::EntryKind;
@@ -908,9 +908,9 @@ pub fn verify(
)?
};
if !failed_dirs.is_empty() {
- task_log!(worker, "Failed to verify the following snapshots/groups:");
+ info!("Failed to verify the following snapshots/groups:");
for dir in failed_dirs {
- task_log!(worker, "\t{}", dir);
+ info!("\t{}", dir);
}
bail!("verification failed - please check the log for details");
}
@@ -1030,9 +1030,9 @@ pub fn prune(
return Ok(json!(prune_result));
}
- let prune_group = move |worker: Arc<WorkerTask>| {
+ let prune_group = move |_worker: Arc<WorkerTask>| {
if keep_all {
- task_log!(worker, "No prune selection - keeping all files.");
+ info!("No prune selection - keeping all files.");
} else {
let mut opts = Vec::new();
if !ns.is_root() {
@@ -1040,9 +1040,8 @@ pub fn prune(
}
crate::server::cli_keep_options(&mut opts, &keep_options);
- task_log!(worker, "retention options: {}", opts.join(" "));
- task_log!(
- worker,
+ info!("retention options: {}", opts.join(" "));
+ info!(
"Starting prune on {} group \"{}\"",
print_store_and_ns(&store, &ns),
group.group(),
@@ -1059,7 +1058,7 @@ pub fn prune(
let msg = format!("{}/{}/{timestamp} {mark}", group.ty, group.id);
- task_log!(worker, "{msg}");
+ info!("{msg}");
prune_result.push(PruneResult {
backup_type: group.ty,
@@ -1072,8 +1071,7 @@ pub fn prune(
if !keep {
if let Err(err) = backup_dir.destroy(false) {
- task_warn!(
- worker,
+ warn!(
"failed to remove dir {:?}: {}",
backup_dir.relative_path(),
err,
@@ -1097,7 +1095,7 @@ pub fn prune(
)?;
Ok(json!(upid))
} else {
- let worker = WorkerTask::new("prune", Some(worker_id), auth_id.to_string(), true)?;
+ let (worker, _) = WorkerTask::new("prune", Some(worker_id), auth_id.to_string(), true)?;
let result = prune_group(worker.clone());
worker.log_result(&Ok(()));
Ok(json!(result))
@@ -1160,9 +1158,7 @@ pub fn prune_datastore(
Some(worker_id),
auth_id.to_string(),
to_stdout,
- move |worker| {
- crate::server::prune_datastore(worker, auth_id, prune_options, datastore, dry_run)
- },
+ move |_worker| crate::server::prune_datastore(auth_id, prune_options, datastore, dry_run),
)?;
Ok(upid_str)
diff --git a/src/api2/config/acme.rs b/src/api2/config/acme.rs
index 4fa276f6..f22ee2ae 100644
--- a/src/api2/config/acme.rs
+++ b/src/api2/config/acme.rs
@@ -9,12 +9,12 @@ use hex::FromHex;
use lazy_static::lazy_static;
use serde::{Deserialize, Serialize};
use serde_json::{json, Value};
+use tracing::{info, warn};
use proxmox_router::{
http_bail, list_subdirs_api_method, Permission, Router, RpcEnvironment, SubdirMap,
};
use proxmox_schema::{api, param_bail};
-use proxmox_sys::{task_log, task_warn};
use proxmox_acme::account::AccountData as AcmeAccountData;
use proxmox_acme::Account;
@@ -240,10 +240,10 @@ fn register_account(
Some(name.to_string()),
auth_id.to_string(),
true,
- move |worker| async move {
+ move |_worker| async move {
let mut client = AcmeClient::new(directory);
- task_log!(worker, "Registering ACME account '{}'...", &name);
+ info!("Registering ACME account '{}'...", &name);
let account = do_register_account(
&mut client,
@@ -255,11 +255,7 @@ fn register_account(
)
.await?;
- task_log!(
- worker,
- "Registration successful, account URL: {}",
- account.location
- );
+ info!("Registration successful, account URL: {}", account.location);
Ok(())
},
@@ -354,7 +350,7 @@ pub fn deactivate_account(
Some(name.to_string()),
auth_id.to_string(),
true,
- move |worker| async move {
+ move |_worker| async move {
match AcmeClient::load(&name)
.await?
.update_account(&json!({"status": "deactivated"}))
@@ -363,11 +359,9 @@ pub fn deactivate_account(
Ok(_account) => (),
Err(err) if !force => return Err(err),
Err(err) => {
- task_warn!(
- worker,
+ warn!(
"error deactivating account {}, proceedeing anyway - {}",
- name,
- err,
+ name, err,
);
}
}
diff --git a/src/api2/config/datastore.rs b/src/api2/config/datastore.rs
index 3081e1f4..b070df0e 100644
--- a/src/api2/config/datastore.rs
+++ b/src/api2/config/datastore.rs
@@ -4,11 +4,11 @@ use ::serde::{Deserialize, Serialize};
use anyhow::Error;
use hex::FromHex;
use serde_json::Value;
+use tracing::warn;
use proxmox_router::{http_bail, Permission, Router, RpcEnvironment, RpcEnvironmentType};
use proxmox_schema::{api, param_bail, ApiType};
use proxmox_section_config::SectionConfigData;
-use proxmox_sys::{task_warn, WorkerTaskContext};
use proxmox_uuid::Uuid;
use pbs_api_types::{
@@ -70,7 +70,6 @@ pub(crate) fn do_create_datastore(
_lock: BackupLockGuard,
mut config: SectionConfigData,
datastore: DataStoreConfig,
- worker: Option<&dyn WorkerTaskContext>,
) -> Result<(), Error> {
let path: PathBuf = datastore.path.clone().into();
@@ -84,7 +83,6 @@ pub(crate) fn do_create_datastore(
path,
backup_user.uid,
backup_user.gid,
- worker,
tuning.sync_level.unwrap_or_default(),
)?;
@@ -155,11 +153,11 @@ pub fn create_datastore(
Some(config.name.to_string()),
auth_id.to_string(),
to_stdout,
- move |worker| {
- do_create_datastore(lock, section_config, config, Some(&worker))?;
+ move |_worker| {
+ do_create_datastore(lock, section_config, config)?;
if let Some(prune_job_config) = prune_job_config {
- do_create_prune_job(prune_job_config, Some(&worker))
+ do_create_prune_job(prune_job_config)
} else {
Ok(())
}
@@ -512,8 +510,8 @@ pub async fn delete_datastore(
Some(name.clone()),
auth_id.to_string(),
to_stdout,
- move |worker| {
- pbs_datastore::DataStore::destroy(&name, destroy_data, &worker)?;
+ move |_worker| {
+ pbs_datastore::DataStore::destroy(&name, destroy_data)?;
// ignore errors
let _ = jobstate::remove_state_file("prune", &name);
@@ -522,7 +520,7 @@ pub async fn delete_datastore(
if let Err(err) =
proxmox_async::runtime::block_on(crate::server::notify_datastore_removed())
{
- task_warn!(worker, "failed to notify after datastore removal: {err}");
+ warn!("failed to notify after datastore removal: {err}");
}
Ok(())
diff --git a/src/api2/config/prune.rs b/src/api2/config/prune.rs
index 4f7ce39c..4f3d94af 100644
--- a/src/api2/config/prune.rs
+++ b/src/api2/config/prune.rs
@@ -1,7 +1,5 @@
use anyhow::Error;
use hex::FromHex;
-use proxmox_sys::task_log;
-use proxmox_sys::WorkerTaskContext;
use serde::{Deserialize, Serialize};
use serde_json::Value;
@@ -15,6 +13,7 @@ use pbs_api_types::{
use pbs_config::prune;
use pbs_config::CachedUserInfo;
+use tracing::info;
#[api(
input: {
@@ -58,10 +57,7 @@ pub fn list_prune_jobs(
Ok(list)
}
-pub fn do_create_prune_job(
- config: PruneJobConfig,
- worker: Option<&dyn WorkerTaskContext>,
-) -> Result<(), Error> {
+pub fn do_create_prune_job(config: PruneJobConfig) -> Result<(), Error> {
let _lock = prune::lock_config()?;
let (mut section_config, _digest) = prune::config()?;
@@ -76,9 +72,7 @@ pub fn do_create_prune_job(
crate::server::jobstate::create_state_file("prunejob", &config.id)?;
- if let Some(worker) = worker {
- task_log!(worker, "Prune job created: {}", config.id);
- }
+ info!("Prune job created: {}", config.id);
Ok(())
}
@@ -108,7 +102,7 @@ pub fn create_prune_job(
user_info.check_privs(&auth_id, &config.acl_path(), PRIV_DATASTORE_MODIFY, true)?;
- do_create_prune_job(config, None)
+ do_create_prune_job(config)
}
#[api(
diff --git a/src/api2/node/apt.rs b/src/api2/node/apt.rs
index 9c0d9ecc..38af0452 100644
--- a/src/api2/node/apt.rs
+++ b/src/api2/node/apt.rs
@@ -1,6 +1,7 @@
use anyhow::{bail, format_err, Error};
use serde_json::{json, Value};
use std::os::unix::prelude::OsStrExt;
+use tracing::{info, warn};
use proxmox_router::{
list_subdirs_api_method, Permission, Router, RpcEnvironment, RpcEnvironmentType, SubdirMap,
@@ -83,9 +84,9 @@ fn read_and_update_proxy_config() -> Result<Option<ProxyConfig>, Error> {
Ok(proxy_config)
}
-fn do_apt_update(worker: &WorkerTask, quiet: bool) -> Result<(), Error> {
+fn do_apt_update(quiet: bool) -> Result<(), Error> {
if !quiet {
- worker.log_message("starting apt-get update")
+ info!("starting apt-get update");
}
read_and_update_proxy_config()?;
@@ -99,7 +100,7 @@ fn do_apt_update(worker: &WorkerTask, quiet: bool) -> Result<(), Error> {
.map_err(|err| format_err!("failed to execute {:?} - {}", command, err))?;
if !quiet {
- worker.log_message(String::from_utf8(output.stdout)?);
+ info!("{}", String::from_utf8(output.stdout)?);
}
// TODO: improve run_command to allow outputting both, stderr and stdout
@@ -114,7 +115,7 @@ fn do_apt_update(worker: &WorkerTask, quiet: bool) -> Result<(), Error> {
}
})
.unwrap_or_else(|_| String::from("non utf8 error message (suppressed)"));
- worker.log_warning(msg);
+ warn!(msg);
} else {
bail!("terminated by signal");
}
@@ -160,8 +161,8 @@ pub fn apt_update_database(
let auth_id = rpcenv.get_auth_id().unwrap();
let to_stdout = rpcenv.env_type() == RpcEnvironmentType::CLI;
- let upid_str = WorkerTask::new_thread("aptupdate", None, auth_id, to_stdout, move |worker| {
- do_apt_update(&worker, quiet)?;
+ let upid_str = WorkerTask::new_thread("aptupdate", None, auth_id, to_stdout, move |_worker| {
+ do_apt_update(quiet)?;
let mut cache = apt::update_cache()?;
diff --git a/src/api2/node/certificates.rs b/src/api2/node/certificates.rs
index 6dfcd0c0..e4fbc8ac 100644
--- a/src/api2/node/certificates.rs
+++ b/src/api2/node/certificates.rs
@@ -5,16 +5,17 @@ use anyhow::{bail, format_err, Error};
use openssl::pkey::PKey;
use openssl::x509::X509;
use serde::{Deserialize, Serialize};
+use tracing::info;
use proxmox_router::list_subdirs_api_method;
use proxmox_router::SubdirMap;
use proxmox_router::{Permission, Router, RpcEnvironment};
use proxmox_schema::api;
-use proxmox_sys::{task_log, task_warn};
use pbs_api_types::{NODE_SCHEMA, PRIV_SYS_MODIFY};
use pbs_buildcfg::configdir;
use pbs_tools::cert;
+use tracing::warn;
use crate::acme::AcmeClient;
use crate::api2::types::AcmeDomain;
@@ -301,10 +302,7 @@ async fn order_certificate(
};
if domains.is_empty() {
- task_log!(
- worker,
- "No domains configured to be ordered from an ACME server."
- );
+ info!("No domains configured to be ordered from an ACME server.");
return Ok(None);
}
@@ -312,11 +310,11 @@ async fn order_certificate(
let mut acme = node_config.acme_client().await?;
- task_log!(worker, "Placing ACME order");
+ info!("Placing ACME order");
let order = acme
.new_order(domains.iter().map(|d| d.domain.to_ascii_lowercase()))
.await?;
- task_log!(worker, "Order URL: {}", order.location);
+ info!("Order URL: {}", order.location);
let identifiers: Vec<String> = order
.data
@@ -328,7 +326,7 @@ async fn order_certificate(
.collect();
for auth_url in &order.data.authorizations {
- task_log!(worker, "Getting authorization details from '{}'", auth_url);
+ info!("Getting authorization details from '{}'", auth_url);
let mut auth = acme.get_authorization(auth_url).await?;
let domain = match &mut auth.identifier {
@@ -336,11 +334,11 @@ async fn order_certificate(
};
if auth.status == Status::Valid {
- task_log!(worker, "{} is already validated!", domain);
+ info!("{} is already validated!", domain);
continue;
}
- task_log!(worker, "The validation for {} is pending", domain);
+ info!("The validation for {} is pending", domain);
let domain_config: &AcmeDomain = get_domain_config(&domain)?;
let plugin_id = domain_config.plugin.as_deref().unwrap_or("standalone");
let mut plugin_cfg =
@@ -348,31 +346,28 @@ async fn order_certificate(
format_err!("plugin '{}' for domain '{}' not found!", plugin_id, domain)
})?;
- task_log!(worker, "Setting up validation plugin");
+ info!("Setting up validation plugin");
let validation_url = plugin_cfg
.setup(&mut acme, &auth, domain_config, Arc::clone(&worker))
.await?;
- let result = request_validation(&worker, &mut acme, auth_url, validation_url).await;
+ let result = request_validation(&mut acme, auth_url, validation_url).await;
if let Err(err) = plugin_cfg
.teardown(&mut acme, &auth, domain_config, Arc::clone(&worker))
.await
{
- task_warn!(
- worker,
+ warn!(
"Failed to teardown plugin '{}' for domain '{}' - {}",
- plugin_id,
- domain,
- err
+ plugin_id, domain, err
);
}
result?;
}
- task_log!(worker, "All domains validated");
- task_log!(worker, "Creating CSR");
+ info!("All domains validated");
+ info!("Creating CSR");
let csr = proxmox_acme::util::Csr::generate(&identifiers, &Default::default())?;
let mut finalize_error_cnt = 0u8;
@@ -385,7 +380,7 @@ async fn order_certificate(
match order.status {
Status::Pending => {
- task_log!(worker, "still pending, trying to finalize anyway");
+ info!("still pending, trying to finalize anyway");
let finalize = order
.finalize
.as_deref()
@@ -400,7 +395,7 @@ async fn order_certificate(
tokio::time::sleep(Duration::from_secs(5)).await;
}
Status::Ready => {
- task_log!(worker, "order is ready, finalizing");
+ info!("order is ready, finalizing");
let finalize = order
.finalize
.as_deref()
@@ -409,18 +404,18 @@ async fn order_certificate(
tokio::time::sleep(Duration::from_secs(5)).await;
}
Status::Processing => {
- task_log!(worker, "still processing, trying again in 30 seconds");
+ info!("still processing, trying again in 30 seconds");
tokio::time::sleep(Duration::from_secs(30)).await;
}
Status::Valid => {
- task_log!(worker, "valid");
+ info!("valid");
break;
}
other => bail!("order status: {:?}", other),
}
}
- task_log!(worker, "Downloading certificate");
+ info!("Downloading certificate");
let certificate = acme
.get_certificate(
order
@@ -437,15 +432,14 @@ async fn order_certificate(
}
async fn request_validation(
- worker: &WorkerTask,
acme: &mut AcmeClient,
auth_url: &str,
validation_url: &str,
) -> Result<(), Error> {
- task_log!(worker, "Triggering validation");
+ info!("Triggering validation");
acme.request_challenge_validation(validation_url).await?;
- task_log!(worker, "Sleeping for 5 seconds");
+ info!("Sleeping for 5 seconds");
tokio::time::sleep(Duration::from_secs(5)).await;
loop {
@@ -454,10 +448,7 @@ async fn request_validation(
let auth = acme.get_authorization(auth_url).await?;
match auth.status {
Status::Pending => {
- task_log!(
- worker,
- "Status is still 'pending', trying again in 10 seconds"
- );
+ info!("Status is still 'pending', trying again in 10 seconds");
tokio::time::sleep(Duration::from_secs(10)).await;
}
Status::Valid => return Ok(()),
@@ -582,15 +573,12 @@ pub fn revoke_acme_cert(rpcenv: &mut dyn RpcEnvironment) -> Result<String, Error
None,
auth_id,
true,
- move |worker| async move {
- task_log!(worker, "Loading ACME account");
+ move |_worker| async move {
+ info!("Loading ACME account");
let mut acme = node_config.acme_client().await?;
- task_log!(worker, "Revoking old certificate");
+ info!("Revoking old certificate");
acme.revoke_certificate(cert_pem.as_bytes(), None).await?;
- task_log!(
- worker,
- "Deleting certificate and regenerating a self-signed one"
- );
+ info!("Deleting certificate and regenerating a self-signed one");
delete_custom_certificate().await?;
Ok(())
},
diff --git a/src/api2/node/disks/directory.rs b/src/api2/node/disks/directory.rs
index 9f1112a9..1db573e9 100644
--- a/src/api2/node/disks/directory.rs
+++ b/src/api2/node/disks/directory.rs
@@ -2,11 +2,11 @@ use ::serde::{Deserialize, Serialize};
use anyhow::{bail, Error};
use serde_json::json;
use std::os::linux::fs::MetadataExt;
+use tracing::info;
use proxmox_router::{Permission, Router, RpcEnvironment, RpcEnvironmentType};
use proxmox_schema::api;
use proxmox_section_config::SectionConfigData;
-use proxmox_sys::task_log;
use pbs_api_types::{
DataStoreConfig, BLOCKDEVICE_NAME_SCHEMA, DATASTORE_SCHEMA, NODE_SCHEMA, PRIV_SYS_AUDIT,
@@ -179,8 +179,8 @@ pub fn create_datastore_disk(
Some(name.clone()),
auth_id,
to_stdout,
- move |worker| {
- task_log!(worker, "create datastore '{}' on disk {}", name, disk);
+ move |_worker| {
+ info!("create datastore '{}' on disk {}", name, disk);
let add_datastore = add_datastore.unwrap_or(false);
let filesystem = filesystem.unwrap_or(FileSystemType::Ext4);
@@ -213,12 +213,7 @@ pub fn create_datastore_disk(
bail!("datastore '{}' already exists.", datastore.name);
}
- crate::api2::config::datastore::do_create_datastore(
- lock,
- config,
- datastore,
- Some(&worker),
- )?;
+ crate::api2::config::datastore::do_create_datastore(lock, config, datastore)?;
}
Ok(())
diff --git a/src/api2/node/disks/mod.rs b/src/api2/node/disks/mod.rs
index 711dae7b..4ec511aa 100644
--- a/src/api2/node/disks/mod.rs
+++ b/src/api2/node/disks/mod.rs
@@ -6,7 +6,7 @@ use proxmox_router::{
};
use proxmox_schema::api;
use proxmox_sortable_macro::sortable;
-use proxmox_sys::task_log;
+use tracing::info;
use pbs_api_types::{
BLOCKDEVICE_DISK_AND_PARTITION_NAME_SCHEMA, BLOCKDEVICE_NAME_SCHEMA, NODE_SCHEMA,
@@ -164,8 +164,8 @@ pub fn initialize_disk(
Some(disk.clone()),
auth_id,
to_stdout,
- move |worker| {
- task_log!(worker, "initialize disk {}", disk);
+ move |_worker| {
+ info!("initialize disk {}", disk);
let disk_manager = DiskManage::new();
let disk_info = disk_manager.disk_by_name(&disk)?;
@@ -209,13 +209,13 @@ pub fn wipe_disk(disk: String, rpcenv: &mut dyn RpcEnvironment) -> Result<Value,
Some(disk.clone()),
auth_id,
to_stdout,
- move |worker| {
- task_log!(worker, "wipe disk {}", disk);
+ move |_worker| {
+ info!("wipe disk {}", disk);
let disk_manager = DiskManage::new();
let disk_info = disk_manager.partition_by_name(&disk)?;
- wipe_blockdev(&disk_info, worker)?;
+ wipe_blockdev(&disk_info)?;
Ok(())
},
diff --git a/src/api2/node/disks/zfs.rs b/src/api2/node/disks/zfs.rs
index 673dc1bf..2447f4aa 100644
--- a/src/api2/node/disks/zfs.rs
+++ b/src/api2/node/disks/zfs.rs
@@ -1,9 +1,9 @@
use anyhow::{bail, Error};
use serde_json::{json, Value};
+use tracing::{error, info};
use proxmox_router::{Permission, Router, RpcEnvironment, RpcEnvironmentType};
use proxmox_schema::api;
-use proxmox_sys::{task_error, task_log};
use pbs_api_types::{
DataStoreConfig, ZfsCompressionType, ZfsRaidLevel, ZpoolListItem, DATASTORE_SCHEMA,
@@ -228,13 +228,10 @@ pub fn create_zpool(
Some(name.clone()),
auth_id,
to_stdout,
- move |worker| {
- task_log!(
- worker,
+ move |_worker| {
+ info!(
"create {:?} zpool '{}' on devices '{}'",
- raidlevel,
- name,
- devices_text
+ raidlevel, name, devices_text
);
let mut command = std::process::Command::new("zpool");
@@ -275,12 +272,12 @@ pub fn create_zpool(
}
}
- task_log!(worker, "# {:?}", command);
+ info!("# {:?}", command);
match proxmox_sys::command::run_command(command, None) {
- Ok(output) => task_log!(worker, "{output}"),
+ Ok(output) => info!("{output}"),
Err(err) => {
- task_error!(worker, "{err}");
+ error!("{err}");
bail!("Error during 'zpool create', see task log for more details");
}
};
@@ -299,11 +296,11 @@ pub fn create_zpool(
command.arg(&format!("compression={}", compression));
}
command.args(["relatime=on", &name]);
- task_log!(worker, "# {:?}", command);
+ info!("# {:?}", command);
match proxmox_sys::command::run_command(command, None) {
- Ok(output) => task_log!(worker, "{output}"),
+ Ok(output) => info!("{output}"),
Err(err) => {
- task_error!(worker, "{err}");
+ error!("{err}");
bail!("Error during 'zfs set', see task log for more details");
}
};
@@ -319,12 +316,7 @@ pub fn create_zpool(
bail!("datastore '{}' already exists.", datastore.name);
}
- crate::api2::config::datastore::do_create_datastore(
- lock,
- config,
- datastore,
- Some(&worker),
- )?;
+ crate::api2::config::datastore::do_create_datastore(lock, config, datastore)?;
}
Ok(())
diff --git a/src/api2/node/mod.rs b/src/api2/node/mod.rs
index 931143fd..7055a683 100644
--- a/src/api2/node/mod.rs
+++ b/src/api2/node/mod.rs
@@ -25,6 +25,7 @@ use proxmox_sortable_macro::sortable;
use proxmox_sys::fd::fd_change_cloexec;
use pbs_api_types::{NODE_SCHEMA, PRIV_SYS_CONSOLE};
+use tracing::{info, warn};
use crate::auth::{private_auth_keyring, public_auth_keyring};
use crate::tools;
@@ -181,20 +182,18 @@ async fn termproxy(cmd: Option<String>, rpcenv: &mut dyn RpcEnvironment) -> Resu
let stdout = child.stdout.take().expect("no child stdout handle");
let stderr = child.stderr.take().expect("no child stderr handle");
- let worker_stdout = worker.clone();
let stdout_fut = async move {
let mut reader = BufReader::new(stdout).lines();
while let Some(line) = reader.next_line().await? {
- worker_stdout.log_message(line);
+ info!(line);
}
Ok::<(), Error>(())
};
- let worker_stderr = worker.clone();
let stderr_fut = async move {
let mut reader = BufReader::new(stderr).lines();
while let Some(line) = reader.next_line().await? {
- worker_stderr.log_warning(line);
+ warn!(line);
}
Ok::<(), Error>(())
};
@@ -226,9 +225,9 @@ async fn termproxy(cmd: Option<String>, rpcenv: &mut dyn RpcEnvironment) -> Resu
}
if let Err(err) = child.kill().await {
- worker.log_warning(format!("error killing termproxy: {}", err));
+ warn!("error killing termproxy: {}", err);
} else if let Err(err) = child.wait().await {
- worker.log_warning(format!("error awaiting termproxy: {}", err));
+ warn!("error awaiting termproxy: {}", err);
}
}
diff --git a/src/api2/pull.rs b/src/api2/pull.rs
index 59db3660..06b752e9 100644
--- a/src/api2/pull.rs
+++ b/src/api2/pull.rs
@@ -1,10 +1,10 @@
//! Sync datastore from remote server
use anyhow::{bail, format_err, Error};
use futures::{future::FutureExt, select};
+use tracing::info;
use proxmox_router::{Permission, Router, RpcEnvironment};
use proxmox_schema::api;
-use proxmox_sys::task_log;
use pbs_api_types::{
Authid, BackupNamespace, GroupFilter, RateLimitConfig, SyncJobConfig, DATASTORE_SCHEMA,
@@ -130,12 +130,12 @@ pub fn do_sync_job(
let worker_future = async move {
let pull_params = PullParameters::try_from(&sync_job)?;
- task_log!(worker, "Starting datastore sync job '{}'", job_id);
+ info!("Starting datastore sync job '{}'", job_id);
if let Some(event_str) = schedule {
- task_log!(worker, "task triggered by schedule '{}'", event_str);
+ info!("task triggered by schedule '{}'", event_str);
}
- task_log!(
- worker,
+
+ info!(
"sync datastore '{}' from '{}{}'",
sync_job.store,
sync_job
@@ -145,33 +145,29 @@ pub fn do_sync_job(
sync_job.remote_store,
);
- let pull_stats = pull_store(&worker, pull_params).await?;
+ let pull_stats = pull_store(pull_params).await?;
if pull_stats.bytes != 0 {
let amount = HumanByte::from(pull_stats.bytes);
let rate = HumanByte::new_binary(
pull_stats.bytes as f64 / pull_stats.elapsed.as_secs_f64(),
);
- task_log!(
- worker,
+ info!(
"Summary: sync job pulled {amount} in {} chunks (average rate: {rate}/s)",
pull_stats.chunk_count,
);
} else {
- task_log!(worker, "Summary: sync job found no new data to pull");
+ info!("Summary: sync job found no new data to pull");
}
if let Some(removed) = pull_stats.removed {
- task_log!(
- worker,
+ info!(
"Summary: removed vanished: snapshots: {}, groups: {}, namespaces: {}",
- removed.snapshots,
- removed.groups,
- removed.namespaces,
+ removed.snapshots, removed.groups, removed.namespaces,
);
}
- task_log!(worker, "sync job '{}' end", &job_id);
+ info!("sync job '{}' end", &job_id);
Ok(())
};
@@ -321,21 +317,20 @@ async fn pull(
auth_id.to_string(),
true,
move |worker| async move {
- task_log!(
- worker,
+ info!(
"pull datastore '{}' from '{}/{}'",
store,
remote.as_deref().unwrap_or("-"),
remote_store,
);
- let pull_future = pull_store(&worker, pull_params);
+ let pull_future = pull_store(pull_params);
(select! {
success = pull_future.fuse() => success,
abort = worker.abort_future().map(|_| Err(format_err!("pull aborted"))) => abort,
})?;
- task_log!(worker, "pull datastore '{}' end", store);
+ info!("pull datastore '{}' end", store);
Ok(())
},
diff --git a/src/api2/tape/backup.rs b/src/api2/tape/backup.rs
index 28d7e720..fae6ee7c 100644
--- a/src/api2/tape/backup.rs
+++ b/src/api2/tape/backup.rs
@@ -2,11 +2,12 @@ use std::sync::{Arc, Mutex};
use anyhow::{bail, format_err, Error};
use serde_json::Value;
+use tracing::{info, warn};
use proxmox_lang::try_block;
use proxmox_router::{Permission, Router, RpcEnvironment, RpcEnvironmentType};
use proxmox_schema::api;
-use proxmox_sys::{task_log, task_warn, WorkerTaskContext};
+use proxmox_sys::WorkerTaskContext;
use pbs_api_types::{
print_ns_and_snapshot, print_store_and_ns, Authid, MediaPoolConfig, Operation,
@@ -181,7 +182,7 @@ pub fn do_tape_backup_job(
let job_result = try_block!({
if schedule.is_some() {
// for scheduled tape backup jobs, we wait indefinitely for the lock
- task_log!(worker, "waiting for drive lock...");
+ info!("waiting for drive lock...");
loop {
worker.check_abort()?;
match lock_tape_device(&drive_config, &setup.drive) {
@@ -196,9 +197,9 @@ pub fn do_tape_backup_job(
}
set_tape_device_state(&setup.drive, &worker.upid().to_string())?;
- task_log!(worker, "Starting tape backup job '{}'", job_id);
+ info!("Starting tape backup job '{}'", job_id);
if let Some(event_str) = schedule {
- task_log!(worker, "task triggered by schedule '{}'", event_str);
+ info!("task triggered by schedule '{}'", event_str);
}
backup_worker(
@@ -392,7 +393,7 @@ fn backup_worker(
) -> Result<(), Error> {
let start = std::time::Instant::now();
- task_log!(worker, "update media online status");
+ info!("update media online status");
let changer_name = update_media_online_status(&setup.drive)?;
let root_namespace = setup.ns.clone().unwrap_or_default();
@@ -400,8 +401,7 @@ fn backup_worker(
let pool = MediaPool::with_config(TAPE_STATUS_DIR, pool_config, changer_name, false)?;
- let mut pool_writer =
- PoolWriter::new(pool, &setup.drive, worker, email, force_media_set, ns_magic)?;
+ let mut pool_writer = PoolWriter::new(pool, &setup.drive, email, force_media_set, ns_magic)?;
let mut group_list = Vec::new();
let namespaces = datastore.recursive_iter_backup_ns_ok(root_namespace, setup.max_depth)?;
@@ -421,8 +421,7 @@ fn backup_worker(
None => group_list,
};
- task_log!(
- worker,
+ info!(
"found {} groups (out of {} total)",
group_list.len(),
group_count_full
@@ -433,10 +432,7 @@ fn backup_worker(
let latest_only = setup.latest_only.unwrap_or(false);
if latest_only {
- task_log!(
- worker,
- "latest-only: true (only considering latest snapshots)"
- );
+ info!("latest-only: true (only considering latest snapshots)");
}
let datastore_name = datastore.name();
@@ -459,8 +455,7 @@ fn backup_worker(
.collect();
if snapshot_list.is_empty() {
- task_log!(
- worker,
+ info!(
"{}, group {} was empty",
print_store_and_ns(datastore_name, group.backup_ns()),
group.group()
@@ -480,7 +475,7 @@ fn backup_worker(
info.backup_dir.backup_ns(),
info.backup_dir.as_ref(),
) {
- task_log!(worker, "skip snapshot {}", rel_path);
+ info!("skip snapshot {}", rel_path);
continue;
}
@@ -493,7 +488,7 @@ fn backup_worker(
SnapshotBackupResult::Ignored => {}
}
progress.done_snapshots = 1;
- task_log!(worker, "percentage done: {}", progress);
+ info!("percentage done: {}", progress);
}
} else {
progress.group_snapshots = snapshot_list.len() as u64;
@@ -506,7 +501,7 @@ fn backup_worker(
info.backup_dir.backup_ns(),
info.backup_dir.as_ref(),
) {
- task_log!(worker, "skip snapshot {}", rel_path);
+ info!("skip snapshot {}", rel_path);
continue;
}
@@ -519,7 +514,7 @@ fn backup_worker(
SnapshotBackupResult::Ignored => {}
}
progress.done_snapshots = snapshot_number as u64 + 1;
- task_log!(worker, "percentage done: {}", progress);
+ info!("percentage done: {}", progress);
}
}
}
@@ -527,18 +522,15 @@ fn backup_worker(
pool_writer.commit()?;
if need_catalog {
- task_log!(worker, "append media catalog");
+ info!("append media catalog");
let uuid = pool_writer.load_writable_media(worker)?;
- let done = pool_writer.append_catalog_archive(worker)?;
+ let done = pool_writer.append_catalog_archive()?;
if !done {
- task_log!(
- worker,
- "catalog does not fit on tape, writing to next volume"
- );
+ info!("catalog does not fit on tape, writing to next volume");
pool_writer.set_media_status_full(&uuid)?;
pool_writer.load_writable_media(worker)?;
- let done = pool_writer.append_catalog_archive(worker)?;
+ let done = pool_writer.append_catalog_archive()?;
if !done {
bail!("write_catalog_archive failed on second media");
}
@@ -546,9 +538,9 @@ fn backup_worker(
}
if setup.export_media_set.unwrap_or(false) {
- pool_writer.export_media_set(worker)?;
+ pool_writer.export_media_set()?;
} else if setup.eject_media.unwrap_or(false) {
- pool_writer.eject_media(worker)?;
+ pool_writer.eject_media()?;
}
if errors {
@@ -558,7 +550,7 @@ fn backup_worker(
summary.used_tapes = match pool_writer.get_used_media_labels() {
Ok(tapes) => Some(tapes),
Err(err) => {
- task_warn!(worker, "could not collect list of used tapes: {err}");
+ warn!("could not collect list of used tapes: {err}");
None
}
};
@@ -592,7 +584,7 @@ fn backup_snapshot(
snapshot: BackupDir,
) -> Result<SnapshotBackupResult, Error> {
let snapshot_path = snapshot.relative_path();
- task_log!(worker, "backup snapshot {:?}", snapshot_path);
+ info!("backup snapshot {:?}", snapshot_path);
let snapshot_reader = match snapshot.locked_reader() {
Ok(reader) => reader,
@@ -600,15 +592,10 @@ fn backup_snapshot(
if !snapshot.full_path().exists() {
// we got an error and the dir does not exist,
// it probably just vanished, so continue
- task_log!(worker, "snapshot {:?} vanished, skipping", snapshot_path);
+ info!("snapshot {:?} vanished, skipping", snapshot_path);
return Ok(SnapshotBackupResult::Ignored);
}
- task_warn!(
- worker,
- "failed opening snapshot {:?}: {}",
- snapshot_path,
- err
- );
+ warn!("failed opening snapshot {:?}: {}", snapshot_path, err);
return Ok(SnapshotBackupResult::Error);
}
};
@@ -654,7 +641,7 @@ fn backup_snapshot(
let snapshot_reader = snapshot_reader.lock().unwrap();
- let (done, _bytes) = pool_writer.append_snapshot_archive(worker, &snapshot_reader)?;
+ let (done, _bytes) = pool_writer.append_snapshot_archive(&snapshot_reader)?;
if !done {
// does not fit on tape, so we try on next volume
@@ -663,19 +650,14 @@ fn backup_snapshot(
worker.check_abort()?;
pool_writer.load_writable_media(worker)?;
- let (done, _bytes) = pool_writer.append_snapshot_archive(worker, &snapshot_reader)?;
+ let (done, _bytes) = pool_writer.append_snapshot_archive(&snapshot_reader)?;
if !done {
bail!("write_snapshot_archive failed on second media");
}
}
- task_log!(
- worker,
- "end backup {}:{:?}",
- datastore.name(),
- snapshot_path
- );
+ info!("end backup {}:{:?}", datastore.name(), snapshot_path);
Ok(SnapshotBackupResult::Success)
}
diff --git a/src/api2/tape/drive.rs b/src/api2/tape/drive.rs
index 5a5d39d9..1bd19383 100644
--- a/src/api2/tape/drive.rs
+++ b/src/api2/tape/drive.rs
@@ -4,6 +4,7 @@ use std::sync::Arc;
use anyhow::{bail, format_err, Error};
use serde_json::Value;
+use tracing::{info, warn};
use proxmox_router::{
list_subdirs_api_method, Permission, Router, RpcEnvironment, RpcEnvironmentType, SubdirMap,
@@ -11,7 +12,6 @@ use proxmox_router::{
use proxmox_schema::api;
use proxmox_section_config::SectionConfigData;
use proxmox_sortable_macro::sortable;
-use proxmox_sys::{task_log, task_warn};
use proxmox_uuid::Uuid;
use pbs_api_types::{
@@ -130,13 +130,8 @@ pub fn load_media(
drive.clone(),
"load-media",
Some(job_id),
- move |worker, config| {
- task_log!(
- worker,
- "loading media '{}' into drive '{}'",
- label_text,
- drive
- );
+ move |_worker, config| {
+ info!("loading media '{}' into drive '{}'", label_text, drive);
let (mut changer, _) = required_media_changer(&config, &drive)?;
changer.load_media(&label_text)?;
Ok(())
@@ -249,8 +244,8 @@ pub fn unload(
drive.clone(),
"unload-media",
Some(drive.clone()),
- move |worker, config| {
- task_log!(worker, "unloading media from drive '{}'", drive);
+ move |_worker, config| {
+ info!("unloading media from drive '{}'", drive);
let (mut changer, _) = required_media_changer(&config, &drive)?;
changer.unload_media(target_slot)?;
@@ -298,9 +293,9 @@ pub fn format_media(
drive.clone(),
"format-media",
Some(drive.clone()),
- move |worker, config| {
+ move |_worker, config| {
if let Some(ref label) = label_text {
- task_log!(worker, "try to load media '{}'", label);
+ info!("try to load media '{}'", label);
if let Some((mut changer, _)) = media_changer(&config, &drive)? {
changer.load_media(label)?;
}
@@ -314,11 +309,8 @@ pub fn format_media(
let mut handle = LtoTapeHandle::new(file)?;
if let Ok(status) = handle.get_drive_and_media_status() {
if status.density >= TapeDensity::LTO9 {
- task_log!(worker, "Slow formatting LTO9+ media.");
- task_log!(
- worker,
- "This can take a very long time due to media optimization."
- );
+ info!("Slow formatting LTO9+ media.");
+ info!("This can take a very long time due to media optimization.");
}
}
}
@@ -329,15 +321,15 @@ pub fn format_media(
bail!("expected label '{}', found unrelated data", label);
}
/* assume drive contains no or unrelated data */
- task_log!(worker, "unable to read media label: {}", err);
- task_log!(worker, "format anyways");
+ info!("unable to read media label: {}", err);
+ info!("format anyways");
handle.format_media(fast.unwrap_or(true))?;
}
Ok((None, _)) => {
if let Some(label) = label_text {
bail!("expected label '{}', found empty tape", label);
}
- task_log!(worker, "found empty media - format anyways");
+ info!("found empty media - format anyways");
handle.format_media(fast.unwrap_or(true))?;
}
Ok((Some(media_id), _key_config)) => {
@@ -351,11 +343,9 @@ pub fn format_media(
}
}
- task_log!(
- worker,
+ info!(
"found media '{}' with uuid '{}'",
- media_id.label.label_text,
- media_id.label.uuid,
+ media_id.label.label_text, media_id.label.uuid,
);
let mut inventory = Inventory::new(TAPE_STATUS_DIR);
@@ -503,7 +493,7 @@ pub fn label_media(
drive.clone(),
"label-media",
Some(drive.clone()),
- move |worker, config| {
+ move |_worker, config| {
let mut drive = open_drive(&config, &drive)?;
drive.rewind()?;
@@ -525,7 +515,7 @@ pub fn label_media(
pool: pool.clone(),
};
- write_media_label(worker, &mut drive, label, pool)
+ write_media_label(&mut drive, label, pool)
},
)?;
@@ -533,7 +523,6 @@ pub fn label_media(
}
fn write_media_label(
- worker: Arc<WorkerTask>,
drive: &mut Box<dyn TapeDriver>,
label: MediaLabel,
pool: Option<String>,
@@ -548,18 +537,9 @@ fn write_media_label(
}
drive.label_tape(&label)?;
if let Some(ref pool) = pool {
- task_log!(
- worker,
- "Label media '{}' for pool '{}'",
- label.label_text,
- pool
- );
+ info!("Label media '{}' for pool '{}'", label.label_text, pool);
} else {
- task_log!(
- worker,
- "Label media '{}' (no pool assignment)",
- label.label_text
- );
+ info!("Label media '{}' (no pool assignment)", label.label_text);
}
let media_id = MediaId {
@@ -746,10 +726,10 @@ pub fn clean_drive(drive: String, rpcenv: &mut dyn RpcEnvironment) -> Result<Val
drive.clone(),
"clean-drive",
Some(drive.clone()),
- move |worker, config| {
+ move |_worker, config| {
let (mut changer, _changer_name) = required_media_changer(&config, &drive)?;
- task_log!(worker, "Starting drive clean");
+ info!("Starting drive clean");
changer.clean_drive()?;
@@ -760,7 +740,7 @@ pub fn clean_drive(drive: String, rpcenv: &mut dyn RpcEnvironment) -> Result<Val
// test for critical tape alert flags
if let Ok(alert_flags) = handle.tape_alert_flags() {
if !alert_flags.is_empty() {
- task_log!(worker, "TapeAlertFlags: {:?}", alert_flags);
+ info!("TapeAlertFlags: {:?}", alert_flags);
if tape_alert_flags_critical(alert_flags) {
bail!("found critical tape alert flags: {:?}", alert_flags);
}
@@ -769,13 +749,13 @@ pub fn clean_drive(drive: String, rpcenv: &mut dyn RpcEnvironment) -> Result<Val
// test wearout (max. 50 mounts)
if let Ok(volume_stats) = handle.volume_statistics() {
- task_log!(worker, "Volume mounts: {}", volume_stats.volume_mounts);
+ info!("Volume mounts: {}", volume_stats.volume_mounts);
let wearout = volume_stats.volume_mounts * 2; // (*100.0/50.0);
- task_log!(worker, "Cleaning tape wearout: {}%", wearout);
+ info!("Cleaning tape wearout: {}%", wearout);
}
}
- task_log!(worker, "Drive cleaned successfully");
+ info!("Drive cleaned successfully");
Ok(())
},
@@ -907,12 +887,12 @@ pub fn update_inventory(
drive.clone(),
"inventory-update",
Some(drive.clone()),
- move |worker, config| {
+ move |_worker, config| {
let (mut changer, changer_name) = required_media_changer(&config, &drive)?;
let label_text_list = changer.online_media_label_texts()?;
if label_text_list.is_empty() {
- task_log!(worker, "changer device does not list any media labels");
+ info!("changer device does not list any media labels");
}
let mut inventory = Inventory::load(TAPE_STATUS_DIR)?;
@@ -921,7 +901,7 @@ pub fn update_inventory(
for label_text in label_text_list.iter() {
if label_text.starts_with("CLN") {
- task_log!(worker, "skip cleaning unit '{}'", label_text);
+ info!("skip cleaning unit '{}'", label_text);
continue;
}
@@ -933,12 +913,12 @@ pub fn update_inventory(
if !catalog
|| MediaCatalog::exists(TAPE_STATUS_DIR, &media_id.label.uuid)
{
- task_log!(worker, "media '{}' already inventoried", label_text);
+ info!("media '{}' already inventoried", label_text);
continue;
}
}
Err(err) => {
- task_warn!(worker, "error getting media by unique label: {err}");
+ warn!("error getting media by unique label: {err}");
// we can't be sure which uuid it is
continue;
}
@@ -947,38 +927,29 @@ pub fn update_inventory(
}
if let Err(err) = changer.load_media(&label_text) {
- task_warn!(worker, "unable to load media '{}' - {}", label_text, err);
+ warn!("unable to load media '{}' - {}", label_text, err);
continue;
}
let mut drive = open_drive(&config, &drive)?;
match drive.read_label() {
Err(err) => {
- task_warn!(
- worker,
- "unable to read label form media '{}' - {}",
- label_text,
- err
- );
+ warn!("unable to read label form media '{}' - {}", label_text, err);
}
Ok((None, _)) => {
- task_log!(worker, "media '{}' is empty", label_text);
+ info!("media '{}' is empty", label_text);
}
Ok((Some(media_id), _key_config)) => {
if label_text != media_id.label.label_text {
- task_warn!(
- worker,
+ warn!(
"label text mismatch ({} != {})",
- label_text,
- media_id.label.label_text
+ label_text, media_id.label.label_text
);
continue;
}
- task_log!(
- worker,
+ info!(
"inventorize media '{}' with uuid '{}'",
- label_text,
- media_id.label.uuid
+ label_text, media_id.label.uuid
);
let _pool_lock = if let Some(pool) = media_id.pool() {
@@ -999,15 +970,11 @@ pub fn update_inventory(
if catalog {
let media_set = inventory.compute_media_set_members(&set.uuid)?;
if let Err(err) = fast_catalog_restore(
- &worker,
&mut drive,
&media_set,
&media_id.label.uuid,
) {
- task_warn!(
- worker,
- "could not restore catalog for {label_text}: {err}"
- );
+ warn!("could not restore catalog for {label_text}: {err}");
}
}
} else {
@@ -1063,14 +1030,13 @@ pub fn barcode_label_media(
drive.clone(),
"barcode-label-media",
Some(drive.clone()),
- move |worker, config| barcode_label_media_worker(worker, drive, &config, pool),
+ move |_worker, config| barcode_label_media_worker(drive, &config, pool),
)?;
Ok(upid_str.into())
}
fn barcode_label_media_worker(
- worker: Arc<WorkerTask>,
drive: String,
drive_config: &SectionConfigData,
pool: Option<String>,
@@ -1103,24 +1069,23 @@ fn barcode_label_media_worker(
inventory.reload()?;
match inventory.find_media_by_label_text(&label_text) {
Ok(Some(_)) => {
- task_log!(
- worker,
+ info!(
"media '{}' already inventoried (already labeled)",
label_text
);
continue;
}
Err(err) => {
- task_warn!(worker, "error getting media by unique label: {err}",);
+ warn!("error getting media by unique label: {err}",);
continue;
}
Ok(None) => {} // ok to label
}
- task_log!(worker, "checking/loading media '{}'", label_text);
+ info!("checking/loading media '{}'", label_text);
if let Err(err) = changer.load_media(&label_text) {
- task_warn!(worker, "unable to load media '{}' - {}", label_text, err);
+ warn!("unable to load media '{}' - {}", label_text, err);
continue;
}
@@ -1129,18 +1094,13 @@ fn barcode_label_media_worker(
match drive.read_next_file() {
Ok(_reader) => {
- task_log!(
- worker,
- "media '{}' is not empty (format it first)",
- label_text
- );
+ info!("media '{}' is not empty (format it first)", label_text);
continue;
}
Err(BlockReadError::EndOfFile) => { /* EOF mark at BOT, assume tape is empty */ }
Err(BlockReadError::EndOfStream) => { /* tape is empty */ }
Err(_err) => {
- task_warn!(
- worker,
+ warn!(
"media '{}' read error (maybe not empty - format it first)",
label_text
);
@@ -1156,7 +1116,7 @@ fn barcode_label_media_worker(
pool: pool.clone(),
};
- write_media_label(worker.clone(), &mut drive, label, pool.clone())?
+ write_media_label(&mut drive, label, pool.clone())?
}
Ok(())
@@ -1315,14 +1275,12 @@ pub fn catalog_media(
let media_id = match drive.read_label()? {
(Some(media_id), key_config) => {
- task_log!(
- worker,
+ info!(
"found media label: {}",
serde_json::to_string_pretty(&serde_json::to_value(&media_id)?)?
);
if key_config.is_some() {
- task_log!(
- worker,
+ info!(
"encryption key config: {}",
serde_json::to_string_pretty(&serde_json::to_value(&key_config)?)?
);
@@ -1336,7 +1294,7 @@ pub fn catalog_media(
let (_media_set_lock, media_set_uuid) = match media_id.media_set_label {
None => {
- task_log!(worker, "media is empty");
+ info!("media is empty");
let _pool_lock = if let Some(pool) = media_id.pool() {
lock_media_pool(TAPE_STATUS_DIR, &pool)?
} else {
@@ -1349,7 +1307,7 @@ pub fn catalog_media(
Some(ref set) => {
if set.unassigned() {
// media is empty
- task_log!(worker, "media is empty");
+ info!("media is empty");
let _lock = lock_unassigned_media_pool(TAPE_STATUS_DIR)?;
MediaCatalog::destroy(TAPE_STATUS_DIR, &media_id.label.uuid)?;
inventory.store(media_id.clone(), false)?;
@@ -1374,14 +1332,14 @@ pub fn catalog_media(
if !scan {
let media_set = inventory.compute_media_set_members(media_set_uuid)?;
- if fast_catalog_restore(&worker, &mut drive, &media_set, &media_id.label.uuid)? {
+ if fast_catalog_restore(&mut drive, &media_set, &media_id.label.uuid)? {
return Ok(());
}
- task_log!(worker, "no catalog found");
+ info!("no catalog found");
}
- task_log!(worker, "scanning entire media to reconstruct catalog");
+ info!("scanning entire media to reconstruct catalog");
drive.rewind()?;
drive.read_label()?; // skip over labels - we already read them above
diff --git a/src/api2/tape/restore.rs b/src/api2/tape/restore.rs
index 8273c867..14a164e0 100644
--- a/src/api2/tape/restore.rs
+++ b/src/api2/tape/restore.rs
@@ -6,6 +6,7 @@ use std::sync::Arc;
use anyhow::{bail, format_err, Error};
use serde_json::Value;
+use tracing::{info, warn};
use proxmox_human_byte::HumanByte;
use proxmox_io::ReadExt;
@@ -13,7 +14,7 @@ use proxmox_router::{Permission, Router, RpcEnvironment, RpcEnvironmentType};
use proxmox_schema::{api, ApiType};
use proxmox_section_config::SectionConfigData;
use proxmox_sys::fs::{replace_file, CreateOptions};
-use proxmox_sys::{task_log, task_warn, WorkerTaskContext};
+use proxmox_sys::WorkerTaskContext;
use proxmox_uuid::Uuid;
use pbs_api_types::{
@@ -399,12 +400,12 @@ pub fn restore(
.and_then(lookup_user_email)
.or_else(|| lookup_user_email(&auth_id.clone().into()));
- task_log!(worker, "Mediaset '{media_set}'");
- task_log!(worker, "Pool: {pool}");
+ info!("Mediaset '{media_set}'");
+ info!("Pool: {pool}");
let res = if snapshots.is_some() || namespaces {
restore_list_worker(
- worker.clone(),
+ worker,
snapshots.unwrap_or_default(),
inventory,
media_set_uuid,
@@ -418,7 +419,7 @@ pub fn restore(
)
} else {
restore_full_worker(
- worker.clone(),
+ worker,
inventory,
media_set_uuid,
drive_config,
@@ -430,10 +431,10 @@ pub fn restore(
)
};
if res.is_ok() {
- task_log!(worker, "Restore mediaset '{media_set}' done");
+ info!("Restore mediaset '{media_set}' done");
}
if let Err(err) = set_tape_device_state(&drive, "") {
- task_log!(worker, "could not unset drive state for {drive}: {err}");
+ info!("could not unset drive state for {drive}: {err}");
}
res
@@ -484,7 +485,7 @@ fn restore_full_worker(
}
if let Some(fingerprint) = encryption_key_fingerprint {
- task_log!(worker, "Encryption key fingerprint: {fingerprint}");
+ info!("Encryption key fingerprint: {fingerprint}");
}
let used_datastores = store_map.used_datastores();
@@ -493,13 +494,9 @@ fn restore_full_worker(
.map(|(t, _)| String::from(t.name()))
.collect::<Vec<String>>()
.join(", ");
- task_log!(worker, "Datastore(s): {datastore_list}",);
- task_log!(worker, "Drive: {drive_name}");
- log_required_tapes(
- &worker,
- &inventory,
- media_id_list.iter().map(|id| &id.label.uuid),
- );
+ info!("Datastore(s): {datastore_list}",);
+ info!("Drive: {drive_name}");
+ log_required_tapes(&inventory, media_id_list.iter().map(|id| &id.label.uuid));
let mut datastore_locks = Vec::new();
for (target, _) in used_datastores.values() {
@@ -529,7 +526,6 @@ fn restore_full_worker(
#[allow(clippy::too_many_arguments)]
fn check_snapshot_restorable(
- worker: &WorkerTask,
store_map: &DataStoreMap,
store: &str,
snapshot: &str,
@@ -570,7 +566,7 @@ fn check_snapshot_restorable(
auth_id,
Some(restore_owner),
) {
- task_warn!(worker, "cannot restore {store}:{snapshot} to {ns}: '{err}'");
+ warn!("cannot restore {store}:{snapshot} to {ns}: '{err}'");
continue;
}
@@ -578,8 +574,7 @@ fn check_snapshot_restorable(
if let Ok(owner) = datastore.get_owner(&ns, dir.as_ref()) {
if restore_owner != &owner {
// only the owner is allowed to create additional snapshots
- task_warn!(
- worker,
+ warn!(
"restore of '{snapshot}' to {ns} failed, owner check failed ({restore_owner} \
!= {owner})",
);
@@ -590,10 +585,7 @@ fn check_snapshot_restorable(
have_some_permissions = true;
if datastore.snapshot_path(&ns, dir).exists() {
- task_warn!(
- worker,
- "found snapshot {snapshot} on target datastore/namespace, skipping...",
- );
+ warn!("found snapshot {snapshot} on target datastore/namespace, skipping...",);
continue;
}
can_restore_some = true;
@@ -606,11 +598,7 @@ fn check_snapshot_restorable(
Ok(can_restore_some)
}
-fn log_required_tapes<'a>(
- worker: &WorkerTask,
- inventory: &Inventory,
- list: impl Iterator<Item = &'a Uuid>,
-) {
+fn log_required_tapes<'a>(inventory: &Inventory, list: impl Iterator<Item = &'a Uuid>) {
let mut tape_list = list
.map(|uuid| {
inventory
@@ -622,7 +610,7 @@ fn log_required_tapes<'a>(
})
.collect::<Vec<&str>>();
tape_list.sort_unstable();
- task_log!(worker, "Required media list: {}", tape_list.join(";"));
+ info!("Required media list: {}", tape_list.join(";"));
}
#[allow(clippy::too_many_arguments)]
@@ -654,14 +642,13 @@ fn restore_list_worker(
let (ns, dir) = match parse_ns_and_snapshot(snapshot) {
Ok((ns, dir)) if store_map.has_full_mapping(store, &ns) => (ns, dir),
Err(err) => {
- task_warn!(worker, "couldn't parse snapshot {snapshot} - {err}");
+ warn!("couldn't parse snapshot {snapshot} - {err}");
continue;
}
_ => continue,
};
let snapshot = print_ns_and_snapshot(&ns, &dir);
match check_snapshot_restorable(
- &worker,
&store_map,
store,
&snapshot,
@@ -675,7 +662,7 @@ fn restore_list_worker(
Ok(true) => restorable.push((store.to_string(), snapshot.to_string(), ns, dir)),
Ok(false) => {}
Err(err) => {
- task_warn!(worker, "{err}");
+ warn!("{err}");
skipped.push(format!("{store}:{snapshot}"));
}
}
@@ -693,7 +680,6 @@ fn restore_list_worker(
match parse_ns_and_snapshot(snapshot) {
Ok((ns, dir)) => {
match check_snapshot_restorable(
- &worker,
&store_map,
store,
snapshot,
@@ -709,14 +695,14 @@ fn restore_list_worker(
}
Ok(false) => None,
Err(err) => {
- task_warn!(worker, "{err}");
+ warn!("{err}");
skipped.push(format!("{store}:{snapshot}"));
None
}
}
}
Err(err) => {
- task_warn!(worker, "could not restore {store_snapshot}: {err}");
+ warn!("could not restore {store_snapshot}: {err}");
skipped.push(store_snapshot);
None
}
@@ -734,10 +720,7 @@ fn restore_list_worker(
let media_id = inventory.lookup_media(media_uuid).unwrap();
(media_id, file_num)
} else {
- task_warn!(
- worker,
- "did not find snapshot '{store}:{snapshot}' in media set",
- );
+ warn!("did not find snapshot '{store}:{snapshot}' in media set",);
skipped.push(format!("{store}:{snapshot}"));
continue;
};
@@ -750,26 +733,25 @@ fn restore_list_worker(
.or_default();
file_list.push(file_num);
- task_log!(
- worker,
+ info!(
"found snapshot {snapshot} on {}: file {file_num}",
media_id.label.label_text,
);
}
if snapshot_file_hash.is_empty() {
- task_log!(worker, "nothing to restore, skipping remaining phases...");
+ info!("nothing to restore, skipping remaining phases...");
if !skipped.is_empty() {
- task_log!(worker, "skipped the following snapshots:");
+ info!("skipped the following snapshots:");
for snap in skipped {
- task_log!(worker, " {snap}");
+ info!(" {snap}");
}
}
return Ok(());
}
- task_log!(worker, "Phase 1: temporarily restore snapshots to temp dir");
- log_required_tapes(&worker, &inventory, snapshot_file_hash.keys());
+ info!("Phase 1: temporarily restore snapshots to temp dir");
+ log_required_tapes(&inventory, snapshot_file_hash.keys());
let mut datastore_chunk_map: HashMap<String, HashSet<[u8; 32]>> = HashMap::new();
let mut tmp_paths = Vec::new();
for (media_uuid, file_list) in snapshot_file_hash.iter_mut() {
@@ -820,10 +802,10 @@ fn restore_list_worker(
drop(catalog);
if !media_file_chunk_map.is_empty() {
- task_log!(worker, "Phase 2: restore chunks to datastores");
- log_required_tapes(&worker, &inventory, media_file_chunk_map.keys());
+ info!("Phase 2: restore chunks to datastores");
+ log_required_tapes(&inventory, media_file_chunk_map.keys());
} else {
- task_log!(worker, "All chunks are already present, skip phase 2...");
+ info!("All chunks are already present, skip phase 2...");
}
for (media_uuid, file_chunk_map) in media_file_chunk_map.iter_mut() {
@@ -838,10 +820,7 @@ fn restore_list_worker(
restore_file_chunk_map(worker.clone(), &mut drive, &store_map, file_chunk_map)?;
}
- task_log!(
- worker,
- "Phase 3: copy snapshots from temp dir to datastores"
- );
+ info!("Phase 3: copy snapshots from temp dir to datastores");
let mut errors = false;
for (source_datastore, snapshot, source_ns, backup_dir) in snapshots.into_iter() {
if let Err(err) = proxmox_lang::try_block!({
@@ -898,20 +877,14 @@ fn restore_list_worker(
Ok(())
}) {
- task_warn!(
- worker,
- "could not restore {source_datastore}:{snapshot}: '{err}'"
- );
+ warn!("could not restore {source_datastore}:{snapshot}: '{err}'");
skipped.push(format!("{source_datastore}:{snapshot}"));
}
}
- task_log!(worker, "Restore snapshot '{}' done", snapshot);
+ info!("Restore snapshot '{}' done", snapshot);
Ok::<_, Error>(())
}) {
- task_warn!(
- worker,
- "could not copy {source_datastore}:{snapshot}: {err}"
- );
+ warn!("could not copy {source_datastore}:{snapshot}: {err}");
errors = true;
}
}
@@ -921,7 +894,7 @@ fn restore_list_worker(
std::fs::remove_dir_all(&tmp_path)
.map_err(|err| format_err!("remove_dir_all failed - {err}"))
}) {
- task_warn!(worker, "could not clean up temp dir {tmp_path:?}: {err}");
+ warn!("could not clean up temp dir {tmp_path:?}: {err}");
errors = true;
};
}
@@ -930,19 +903,16 @@ fn restore_list_worker(
bail!("errors during copy occurred");
}
if !skipped.is_empty() {
- task_log!(worker, "(partially) skipped the following snapshots:");
+ info!("(partially) skipped the following snapshots:");
for snap in skipped {
- task_log!(worker, " {snap}");
+ info!(" {snap}");
}
}
Ok(())
});
if res.is_err() {
- task_warn!(
- worker,
- "Error during restore, partially restored snapshots will NOT be cleaned up"
- );
+ warn!("Error during restore, partially restored snapshots will NOT be cleaned up");
}
for (datastore, _) in store_map.used_datastores().values() {
@@ -950,7 +920,7 @@ fn restore_list_worker(
match std::fs::remove_dir_all(tmp_path) {
Ok(()) => {}
Err(err) if err.kind() == std::io::ErrorKind::NotFound => {}
- Err(err) => task_warn!(worker, "error cleaning up: {}", err),
+ Err(err) => warn!("error cleaning up: {}", err),
}
}
@@ -1033,13 +1003,10 @@ fn restore_snapshots_to_tmpdir(
for file_num in file_list {
let current_file_number = drive.current_file_number()?;
if current_file_number != *file_num {
- task_log!(
- worker,
- "was at file {current_file_number}, moving to {file_num}"
- );
+ info!("was at file {current_file_number}, moving to {file_num}");
drive.move_to_file(*file_num)?;
let current_file_number = drive.current_file_number()?;
- task_log!(worker, "now at file {}", current_file_number);
+ info!("now at file {}", current_file_number);
}
let mut reader = drive.read_next_file()?;
@@ -1061,20 +1028,14 @@ fn restore_snapshots_to_tmpdir(
let source_datastore = archive_header.store;
let snapshot = archive_header.snapshot;
- task_log!(
- worker,
- "File {file_num}: snapshot archive {source_datastore}:{snapshot}",
- );
+ info!("File {file_num}: snapshot archive {source_datastore}:{snapshot}",);
let mut decoder = pxar::decoder::sync::Decoder::from_std(reader)?;
let target_datastore = match store_map.target_store(&source_datastore) {
Some(datastore) => datastore,
None => {
- task_warn!(
- worker,
- "could not find target datastore for {source_datastore}:{snapshot}",
- );
+ warn!("could not find target datastore for {source_datastore}:{snapshot}",);
continue;
}
};
@@ -1126,10 +1087,10 @@ fn restore_file_chunk_map(
for (nr, chunk_map) in file_chunk_map.iter_mut() {
let current_file_number = drive.current_file_number()?;
if current_file_number != *nr {
- task_log!(worker, "was at file {current_file_number}, moving to {nr}");
+ info!("was at file {current_file_number}, moving to {nr}");
drive.move_to_file(*nr)?;
let current_file_number = drive.current_file_number()?;
- task_log!(worker, "now at file {}", current_file_number);
+ info!("now at file {}", current_file_number);
}
let mut reader = drive.read_next_file()?;
let header: MediaContentHeader = unsafe { reader.read_le_value()? };
@@ -1146,10 +1107,7 @@ fn restore_file_chunk_map(
let source_datastore = archive_header.store;
- task_log!(
- worker,
- "File {nr}: chunk archive for datastore '{source_datastore}'",
- );
+ info!("File {nr}: chunk archive for datastore '{source_datastore}'",);
let datastore = store_map.target_store(&source_datastore).ok_or_else(|| {
format_err!("unexpected chunk archive for store: {source_datastore}")
@@ -1161,7 +1119,7 @@ fn restore_file_chunk_map(
datastore.clone(),
chunk_map,
)?;
- task_log!(worker, "restored {count} chunks");
+ info!("restored {count} chunks");
}
_ => bail!("unexpected content magic {:?}", header.content_magic),
}
@@ -1221,8 +1179,7 @@ fn restore_partial_chunk_archive<'a>(
let elapsed = start_time.elapsed()?.as_secs_f64();
let bytes = bytes.load(std::sync::atomic::Ordering::SeqCst) as f64;
- task_log!(
- worker,
+ info!(
"restored {} ({:.2}/s)",
HumanByte::new_decimal(bytes),
HumanByte::new_decimal(bytes / elapsed),
@@ -1301,15 +1258,11 @@ pub fn restore_media(
let current_file_number = drive.current_file_number()?;
let reader = match drive.read_next_file() {
Err(BlockReadError::EndOfFile) => {
- task_log!(
- worker,
- "skip unexpected filemark at pos {}",
- current_file_number
- );
+ info!("skip unexpected filemark at pos {}", current_file_number);
continue;
}
Err(BlockReadError::EndOfStream) => {
- task_log!(worker, "detected EOT after {} files", current_file_number);
+ info!("detected EOT after {} files", current_file_number);
break;
}
Err(BlockReadError::Error(err)) => {
@@ -1373,12 +1326,9 @@ fn restore_archive<'a>(
let datastore_name = archive_header.store;
let snapshot = archive_header.snapshot;
- task_log!(
- worker,
+ info!(
"File {}: snapshot archive {}:{}",
- current_file_number,
- datastore_name,
- snapshot
+ current_file_number, datastore_name, snapshot
);
let (backup_ns, backup_dir) = parse_ns_and_snapshot(&snapshot)?;
@@ -1413,16 +1363,16 @@ fn restore_archive<'a>(
path.push(rel_path);
if is_new {
- task_log!(worker, "restore snapshot {}", backup_dir);
+ info!("restore snapshot {}", backup_dir);
- match restore_snapshot_archive(worker.clone(), reader, &path) {
+ match restore_snapshot_archive(worker, reader, &path) {
Err(err) => {
std::fs::remove_dir_all(&path)?;
bail!("restore snapshot {} failed - {}", backup_dir, err);
}
Ok(false) => {
std::fs::remove_dir_all(&path)?;
- task_log!(worker, "skip incomplete snapshot {}", backup_dir);
+ info!("skip incomplete snapshot {}", backup_dir);
}
Ok(true) => {
catalog.register_snapshot(
@@ -1438,7 +1388,7 @@ fn restore_archive<'a>(
return Ok(());
}
} else {
- task_log!(worker, "skipping...");
+ info!("skipping...");
}
}
@@ -1465,11 +1415,9 @@ fn restore_archive<'a>(
let source_datastore = archive_header.store;
- task_log!(
- worker,
+ info!(
"File {}: chunk archive for datastore '{}'",
- current_file_number,
- source_datastore
+ current_file_number, source_datastore
);
let datastore = target
.as_ref()
@@ -1487,15 +1435,9 @@ fn restore_archive<'a>(
.or_default();
let chunks = if let Some(datastore) = datastore {
- restore_chunk_archive(
- worker.clone(),
- reader,
- datastore,
- checked_chunks,
- verbose,
- )?
+ restore_chunk_archive(worker, reader, datastore, checked_chunks, verbose)?
} else {
- scan_chunk_archive(worker.clone(), reader, verbose)?
+ scan_chunk_archive(worker, reader, verbose)?
};
if let Some(chunks) = chunks {
@@ -1505,12 +1447,12 @@ fn restore_archive<'a>(
&source_datastore,
&chunks[..],
)?;
- task_log!(worker, "register {} chunks", chunks.len());
+ info!("register {} chunks", chunks.len());
catalog.commit_if_large()?;
}
return Ok(());
} else if target.is_some() {
- task_log!(worker, "skipping...");
+ info!("skipping...");
}
reader.skip_data()?; // read all data
@@ -1521,11 +1463,9 @@ fn restore_archive<'a>(
let archive_header: CatalogArchiveHeader = serde_json::from_slice(&header_data)
.map_err(|err| format_err!("unable to parse catalog archive header - {}", err))?;
- task_log!(
- worker,
+ info!(
"File {}: skip catalog '{}'",
- current_file_number,
- archive_header.uuid
+ current_file_number, archive_header.uuid
);
reader.skip_data()?; // read all data
@@ -1560,7 +1500,7 @@ fn scan_chunk_archive<'a>(
// check if this is an aborted stream without end marker
if let Ok(false) = reader.has_end_marker() {
- task_log!(worker, "missing stream end marker");
+ info!("missing stream end marker");
return Ok(None);
}
@@ -1572,7 +1512,7 @@ fn scan_chunk_archive<'a>(
worker.check_abort()?;
if verbose {
- task_log!(worker, "Found chunk: {}", hex::encode(digest));
+ info!("Found chunk: {}", hex::encode(digest));
}
chunks.push(digest);
@@ -1596,8 +1536,6 @@ fn restore_chunk_archive<'a>(
let bytes = Arc::new(std::sync::atomic::AtomicU64::new(0));
let bytes2 = bytes.clone();
- let worker2 = worker.clone();
-
let writer_pool = ParallelHandler::new(
"tape restore chunk writer",
4,
@@ -1605,7 +1543,7 @@ fn restore_chunk_archive<'a>(
let chunk_exists = datastore.cond_touch_chunk(&digest, false)?;
if !chunk_exists {
if verbose {
- task_log!(worker2, "Insert chunk: {}", hex::encode(digest));
+ info!("Insert chunk: {}", hex::encode(digest));
}
bytes2.fetch_add(chunk.raw_size(), std::sync::atomic::Ordering::SeqCst);
// println!("verify and write {}", hex::encode(&digest));
@@ -1616,7 +1554,7 @@ fn restore_chunk_archive<'a>(
datastore.insert_chunk(&chunk, &digest)?;
} else if verbose {
- task_log!(worker2, "Found existing chunk: {}", hex::encode(digest));
+ info!("Found existing chunk: {}", hex::encode(digest));
}
Ok(())
},
@@ -1638,7 +1576,7 @@ fn restore_chunk_archive<'a>(
// check if this is an aborted stream without end marker
if let Ok(false) = reader.has_end_marker() {
- task_log!(worker, "missing stream end marker");
+ info!("missing stream end marker");
return Ok(None);
}
@@ -1662,8 +1600,7 @@ fn restore_chunk_archive<'a>(
let elapsed = start_time.elapsed()?.as_secs_f64();
let bytes = bytes.load(std::sync::atomic::Ordering::SeqCst) as f64;
- task_log!(
- worker,
+ info!(
"restored {} ({:.2}/s)",
HumanByte::new_decimal(bytes),
HumanByte::new_decimal(bytes / elapsed),
@@ -1814,7 +1751,6 @@ fn try_restore_snapshot_archive<R: pxar::decoder::SeqRead>(
/// Try to restore media catalogs (form catalog_archives)
pub fn fast_catalog_restore(
- worker: &WorkerTask,
drive: &mut Box<dyn TapeDriver>,
media_set: &MediaSet,
uuid: &Uuid, // current media Uuid
@@ -1835,14 +1771,11 @@ pub fn fast_catalog_restore(
// limit reader scope
let mut reader = match drive.read_next_file() {
Err(BlockReadError::EndOfFile) => {
- task_log!(
- worker,
- "skip unexpected filemark at pos {current_file_number}"
- );
+ info!("skip unexpected filemark at pos {current_file_number}");
continue;
}
Err(BlockReadError::EndOfStream) => {
- task_log!(worker, "detected EOT after {current_file_number} files");
+ info!("detected EOT after {current_file_number} files");
break;
}
Err(BlockReadError::Error(err)) => {
@@ -1859,7 +1792,7 @@ pub fn fast_catalog_restore(
if header.content_magic == PROXMOX_BACKUP_CATALOG_ARCHIVE_MAGIC_1_0
|| header.content_magic == PROXMOX_BACKUP_CATALOG_ARCHIVE_MAGIC_1_1
{
- task_log!(worker, "found catalog at pos {}", current_file_number);
+ info!("found catalog at pos {}", current_file_number);
let header_data = reader.read_exact_allocated(header.size as usize)?;
@@ -1869,11 +1802,7 @@ pub fn fast_catalog_restore(
})?;
if &archive_header.media_set_uuid != media_set.uuid() {
- task_log!(
- worker,
- "skipping unrelated catalog at pos {}",
- current_file_number
- );
+ info!("skipping unrelated catalog at pos {}", current_file_number);
reader.skip_data()?; // read all data
continue;
}
@@ -1886,8 +1815,7 @@ pub fn fast_catalog_restore(
});
if !wanted {
- task_log!(
- worker,
+ info!(
"skip catalog because media '{}' not inventarized",
catalog_uuid
);
@@ -1900,11 +1828,7 @@ pub fn fast_catalog_restore(
} else {
// only restore if catalog does not exist
if MediaCatalog::exists(TAPE_STATUS_DIR, catalog_uuid) {
- task_log!(
- worker,
- "catalog for media '{}' already exists",
- catalog_uuid
- );
+ info!("catalog for media '{}' already exists", catalog_uuid);
reader.skip_data()?; // read all data
continue;
}
@@ -1920,19 +1844,11 @@ pub fn fast_catalog_restore(
match MediaCatalog::parse_catalog_header(&mut file)? {
(true, Some(media_uuid), Some(media_set_uuid)) => {
if &media_uuid != catalog_uuid {
- task_log!(
- worker,
- "catalog uuid mismatch at pos {}",
- current_file_number
- );
+ info!("catalog uuid mismatch at pos {}", current_file_number);
continue;
}
if media_set_uuid != archive_header.media_set_uuid {
- task_log!(
- worker,
- "catalog media_set mismatch at pos {}",
- current_file_number
- );
+ info!("catalog media_set mismatch at pos {}", current_file_number);
continue;
}
@@ -1943,18 +1859,14 @@ pub fn fast_catalog_restore(
)?;
if catalog_uuid == uuid {
- task_log!(worker, "successfully restored catalog");
+ info!("successfully restored catalog");
found_catalog = true
} else {
- task_log!(
- worker,
- "successfully restored related catalog {}",
- media_uuid
- );
+ info!("successfully restored related catalog {}", media_uuid);
}
}
_ => {
- task_warn!(worker, "got incomplete catalog header - skip file");
+ warn!("got incomplete catalog header - skip file");
continue;
}
}
@@ -1968,7 +1880,7 @@ pub fn fast_catalog_restore(
}
moved_to_eom = true;
- task_log!(worker, "searching for catalog at EOT (moving to EOT)");
+ info!("searching for catalog at EOT (moving to EOT)");
drive.move_to_last_file()?;
let new_file_number = drive.current_file_number()?;
--
2.43.0
_______________________________________________
pbs-devel mailing list
pbs-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pbs-devel
next prev parent reply other threads:[~2024-04-17 14:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-17 14:13 [pbs-devel] [PATCH proxmox{, -backup} v4 0/4] proxmox-log introduction Gabriel Goller
2024-04-17 14:13 ` [pbs-devel] [PATCH proxmox v4 1/4] proxmox-log: add tracing infrastructure Gabriel Goller
2024-04-17 14:13 ` [pbs-devel] [PATCH proxmox v4 2/4] enable tracing logger, remove task_log macros Gabriel Goller
2024-04-17 14:13 ` [pbs-devel] [PATCH proxmox-backup v4 3/4] switch from task_log! macro to tracing Gabriel Goller
2024-04-17 14:13 ` Gabriel Goller [this message]
2024-06-13 13:56 ` [pbs-devel] [PATCH proxmox{, -backup} v4 0/4] proxmox-log introduction Gabriel Goller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240417141323.144861-5-g.goller@proxmox.com \
--to=g.goller@proxmox.com \
--cc=pbs-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.