From: Stefan Hrdlicka <s.hrdlicka@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [pve-devel] [PATCH V2 pve-firewall 1/1] fix #1965: cache firewall/cluster.fw file
Date: Fri, 25 Nov 2022 15:47:25 +0100 [thread overview]
Message-ID: <20221125144725.3231444-2-s.hrdlicka@proxmox.com> (raw)
In-Reply-To: <20221125144725.3231444-1-s.hrdlicka@proxmox.com>
for large IP sets (for example > 25k) it takes noticable longer to parse the
files, this commit caches the cluster.fw file and reduces parsing time
Signed-off-by: Stefan Hrdlicka <s.hrdlicka@proxmox.com>
---
src/PVE/Firewall.pm | 108 ++++++++++++++++++++++++++++++--------------
1 file changed, 75 insertions(+), 33 deletions(-)
diff --git a/src/PVE/Firewall.pm b/src/PVE/Firewall.pm
index d40a9b1..8bb41ba 100644
--- a/src/PVE/Firewall.pm
+++ b/src/PVE/Firewall.pm
@@ -26,6 +26,12 @@ use PVE::Tools qw(run_command lock_file dir_glob_foreach);
use PVE::Firewall::Helpers;
+PVE::Cluster::cfs_register_file(
+ "firewall/cluster.fw",
+ \&parse_clusterfw_config,
+ \&_save_clusterfw_conf
+);
+
my $pvefw_conf_dir = "/etc/pve/firewall";
my $clusterfw_conf_filename = "$pvefw_conf_dir/cluster.fw";
@@ -2953,23 +2959,28 @@ sub parse_alias {
return undef;
}
-sub generic_fw_config_parser {
- my ($filename, $cluster_conf, $empty_conf, $rule_env) = @_;
-
- my $section;
- my $group;
+sub parse_clusterfw_config {
+ my ($filename, $raw) = @_;
+ my $empty_conf = {
+ rules => [],
+ options => {},
+ aliases => {},
+ groups => {},
+ group_comments => {},
+ ipset => {} ,
+ ipset_comments => {},
+ };
- my $res = $empty_conf;
+ return _generic_fw_config_parser($filename, $empty_conf, $empty_conf, 'cluster', $raw);
+}
- my $raw;
- if ($filename =~ m!^/etc/pve/(.*)$!) {
- $raw = PVE::Cluster::get_config($1);
- } else {
- $raw = eval { PVE::Tools::file_get_contents($filename) }; # ignore errors
- }
- return {} if !$raw;
+sub _generic_fw_config_parser {
+ my ($filename, $cluster_conf, $empty_conf, $rule_env, $raw) = @_;
+ my $section;
+ my $group;
my $curr_group_keys = {};
+ my $res = $empty_conf;
my $linenr = 0;
while ($raw =~ /^\h*(.*?)\h*$/gm) {
@@ -3132,6 +3143,26 @@ sub generic_fw_config_parser {
return $res;
}
+sub generic_fw_config_parser {
+ my ($filename, $cluster_conf, $empty_conf, $rule_env) = @_;
+
+ my $section;
+ my $group;
+
+ my $res = $empty_conf;
+
+ my $raw;
+ if ($filename =~ m!^/etc/pve/(.*)$!) {
+ $raw = PVE::Cluster::get_config($1);
+ } else {
+ $raw = eval { PVE::Tools::file_get_contents($filename) }; # ignore errors
+ }
+ return {} if !$raw;
+
+ my $curr_group_keys = {};
+ return _generic_fw_config_parser($filename, $cluster_conf, $empty_conf, $rule_env, $raw);
+}
+
# this is only used to prevent concurrent runs of rule compilation/application
# see lock_*_conf for cfs locks protectiong config modification
sub run_locked {
@@ -3544,26 +3575,42 @@ sub lock_clusterfw_conf {
sub load_clusterfw_conf {
my ($filename) = @_;
- $filename = $clusterfw_conf_filename if !defined($filename);
- my $empty_conf = {
- rules => [],
- options => {},
- aliases => {},
- groups => {},
- group_comments => {},
- ipset => {} ,
- ipset_comments => {},
- };
+ # special case for tests
+ if ($filename) {
+ my $empty_conf = {
+ rules => [],
+ options => {},
+ aliases => {},
+ groups => {},
+ group_comments => {},
+ ipset => {} ,
+ ipset_comments => {},
+ };
+
+ my $cluster_conf = generic_fw_config_parser($filename, $empty_conf, $empty_conf, 'cluster');
+ $set_global_log_ratelimit->($cluster_conf->{options});
- my $cluster_conf = generic_fw_config_parser($filename, $empty_conf, $empty_conf, 'cluster');
- $set_global_log_ratelimit->($cluster_conf->{options});
+ return $cluster_conf;
+
+ } else {
+ my $res = {};
+ eval { $res = PVE::Cluster::cfs_read_file("firewall/cluster.fw"); };
+ warn $@ if $@;
+
+ return $res;
+ }
- return $cluster_conf;
}
sub save_clusterfw_conf {
my ($cluster_conf) = @_;
+ PVE::Cluster::cfs_write_file("firewall/cluster.fw", $cluster_conf)
+}
+
+sub _save_clusterfw_conf {
+ my ($filename, $cluster_conf) = @_;
+
my $raw = '';
my $options = $cluster_conf->{options};
@@ -3595,13 +3642,7 @@ sub save_clusterfw_conf {
$raw .= "\n";
}
}
-
- if ($raw) {
- mkdir $pvefw_conf_dir;
- PVE::Tools::file_set_contents($clusterfw_conf_filename, $raw);
- } else {
- unlink $clusterfw_conf_filename;
- }
+ return $raw
}
sub lock_hostfw_conf : prototype($$$@) {
@@ -4601,4 +4642,5 @@ sub update {
run_locked($code);
}
+
1;
--
2.30.2
next prev parent reply other threads:[~2022-11-25 14:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-25 14:47 [pve-devel] [PATCH V2 pve-firewall 0/1] cache firewall/cluster.fw Stefan Hrdlicka
2022-11-25 14:47 ` Stefan Hrdlicka [this message]
2024-02-15 15:35 ` [pve-devel] [PATCH V2 pve-firewall 1/1] fix #1965: cache firewall/cluster.fw file Lukas Wagner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221125144725.3231444-2-s.hrdlicka@proxmox.com \
--to=s.hrdlicka@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.