all lists on lists.proxmox.com
 help / color / mirror / Atom feed
From: Stoiko Ivanov <s.ivanov@proxmox.com>
To: pmg-devel@lists.proxmox.com
Subject: [pmg-devel] [PATCH pmg-api v3 2/2] fix #2795: add support for DSN
Date: Thu, 25 Nov 2021 20:20:01 +0100	[thread overview]
Message-ID: <20211125192001.150932-3-s.ivanov@proxmox.com> (raw)
In-Reply-To: <20211125192001.150932-1-s.ivanov@proxmox.com>

store the esmtp parameters for the MAIL and RCPT command needed to
support Delivery status notifications (DSN - RFC 3464 [0]) and pass
them to the outbound postfix instance (port 10025) used for sending
the mail further (see also [1]).

Postfix does syntax-checking before passing the mail to the proxy
also in before-queue filtering mode.

Since the handling is done by postfix we don't need to generate any
DSN in the regular case.
For mail put into quarantine I decided to skip sending a delivery
notification (on the expectation, that few people are using quarantine
outbound, and that I would not consider a mail put in quarantine as
delivered successfully)

We only store a whitelist of parameters, instead of passing all,
because some parameters might not be valid anymore after processing
(e.g. SIZE)

The DSN EHLO keyword was added for the after-queue filtering case -
else the inbound postfix is the system that sends out the
notification.

tested with various combinations of the -V, -N and -R parameters to
sendmail (e.g.):
```
/usr/sbin/sendmail -N success,delay,failure \
-V '<xxxxxxxx@test.proxmox.com>'\
-R hdrs test@test.domain.example
```
tested the following scenarios in before and after-queue filter mode:
* successful delivery
* successful delivery with set DSN
* failed delivery (recipient rejects with 544)
* failed delivery with DSN
* delivering a mail with empty envelope sender (bounce)

some tests with invalid combinations were also done with netcat.

[0] https://tools.ietf.org/html/rfc3464
[1] http://www.postfix.org/DSN_README.html

Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
---
 src/PMG/RuleDB/Accept.pm |  2 +-
 src/PMG/RuleDB/BCC.pm    |  6 +++++-
 src/PMG/SMTP.pm          | 23 ++++++++++++++++++++---
 src/PMG/Utils.pm         | 19 ++++++++++++++++---
 src/bin/pmg-smtp-filter  |  1 +
 5 files changed, 43 insertions(+), 8 deletions(-)

diff --git a/src/PMG/RuleDB/Accept.pm b/src/PMG/RuleDB/Accept.pm
index 0bcf250..cd67ea2 100644
--- a/src/PMG/RuleDB/Accept.pm
+++ b/src/PMG/RuleDB/Accept.pm
@@ -122,7 +122,7 @@ sub execute {
 	} else {
 	    my ($qid, $code, $mess) = PMG::Utils::reinject_mail(
 		$entity, $msginfo->{sender}, $tg,
-		$msginfo->{xforward}, $msginfo->{fqdn});
+		$msginfo->{xforward}, $msginfo->{fqdn}, $msginfo->{param});
 	    if ($qid) {
 		foreach (@$tg) {
 		    syslog('info', "%s: accept mail to <%s> (%s) (rule: %s)", $queue->{logid}, encode('UTF-8', $_), $qid, $rulename);
diff --git a/src/PMG/RuleDB/BCC.pm b/src/PMG/RuleDB/BCC.pm
index a8db3f5..d364690 100644
--- a/src/PMG/RuleDB/BCC.pm
+++ b/src/PMG/RuleDB/BCC.pm
@@ -156,9 +156,13 @@ sub execute {
 	    $entity->print ($fh);
 	    print $fh "bcc end\n";
 	} else {
+	    my $param = {};
+	    for my $bcc (@bcc_targets) {
+		$param->{rcpt}->{$bcc}->{notify} = "never";
+	    }
 	    my $qid = PMG::Utils::reinject_mail(
 		$entity, $msginfo->{sender}, \@bcc_targets,
-		$msginfo->{xforward}, $msginfo->{fqdn}, 1);
+		$msginfo->{xforward}, $msginfo->{fqdn}, $param);
 	    foreach (@bcc_targets) {
 		if ($qid) {
 		    syslog('info', "%s: bcc to <%s> (rule: %s, %s)", $queue->{logid}, $_, $rulename, $qid);
diff --git a/src/PMG/SMTP.pm b/src/PMG/SMTP.pm
index b3550d4..fbf5c95 100644
--- a/src/PMG/SMTP.pm
+++ b/src/PMG/SMTP.pm
@@ -38,6 +38,7 @@ sub reset {
     delete $self->{smtputf8};
     delete $self->{xforward};
     delete $self->{status};
+    delete $self->{param};
 }
 
 sub abort {
@@ -77,6 +78,7 @@ sub loop {
 	    $self->reply ("250-ENHANCEDSTATUSCODES");
 	    $self->reply ("250-8BITMIME");
 	    $self->reply ("250-SMTPUTF8");
+	    $self->reply ("250-DSN");
 	    $self->reply ("250-XFORWARD NAME ADDR PROTO HELO");
 	    $self->reply ("250 OK.");
 	    $self->{lmtp} = 1 if ($cmd eq 'lhlo');
@@ -103,9 +105,16 @@ sub loop {
 	    if ($args =~ m/^from:\s*<([^\s\>]*?)>( .*)?$/i) {
 		delete $self->{to};
 		my ($from, $opts) = ($1, $2 // '');
-		if ($opts =~ m/\sSMTPUTF8/) {
-		    $self->{smtputf8} = 1;
-		    $from = decode('UTF-8', $from);
+
+		for my $opt (split(' ', $opts)) {
+		    if ($opt =~ /(ret|envid)=([^ =]+)/i ) {
+			$self->{param}->{mail}->{$1} = $2;
+		    } elsif ($opt =~ m/smtputf8/i) {
+			$self->{smtputf8} = 1;
+			$from = decode('UTF-8', $from);
+		    } else {
+			#ignore everything else
+		    }
 		}
 		$self->{from} = $from;
 		$self->reply ('250 2.5.0 OK');
@@ -117,7 +126,15 @@ sub loop {
 	} elsif ($cmd eq 'rcpt') {
 	    if ($args =~ m/^to:\s*<([^\s\>]+?)>( .*)?$/i) {
 		my $to = $self->{smtputf8} ? decode('UTF-8', $1) : $1;
+		my $opts = $2 // '';
 		push @{$self->{to}} , $to;
+		for my $opt (split(' ', $opts)) {
+		    if ($opt =~ /(notify|orcpt)=([^ =]+)/i ) {
+			$self->{param}->{rcpt}->{$to}->{$1} = $2;
+		    } else {
+			#ignore everything else
+		    }
+		}
 		$self->reply ('250 2.5.0 OK');
 		next;
 	    } else {
diff --git a/src/PMG/Utils.pm b/src/PMG/Utils.pm
index 92c3a7a..4eebfa5 100644
--- a/src/PMG/Utils.pm
+++ b/src/PMG/Utils.pm
@@ -203,7 +203,7 @@ sub subst_values {
 }
 
 sub reinject_mail {
-    my ($entity, $sender, $targets, $xforward, $me, $nodsn) = @_;
+    my ($entity, $sender, $targets, $xforward, $me, $params) = @_;
 
     my $smtp;
     my $resid;
@@ -244,15 +244,28 @@ sub reinject_mail {
 	    $mail_opts .= " SMTPUTF8" if $has_utf8_targets;
 	}
 
+	if (defined($params->{mail})) {
+	    my $mailparams = $params->{mail};
+	    for my $p (keys %$mailparams) {
+		$mail_opts .= " $p=$mailparams->{$p}";
+	    }
+	}
+
 	if (!$smtp->_MAIL("FROM:" . $sender_addr . $mail_opts)) {
 	    syslog('err', "smtp error - got: %s %s", $smtp->code, scalar ($smtp->message));
 	    die "smtp from: ERROR";
 	}
 
-	my $rcpt_opts = $nodsn ? " NOTIFY=NEVER" : "";
-
 	foreach my $target (@$targets) {
 	    my $rcpt_addr;
+	    my $rcpt_opts = '';
+	    if (defined($params->{rcpt}->{$target})) {
+		my $rcptparams = $params->{rcpt}->{$target};
+		for my $p (keys %$rcptparams) {
+		    $rcpt_opts .= " $p=$rcptparams->{$p}";
+		}
+	    }
+
 	    if (utf8::is_utf8($target)) {
 		$rcpt_addr = encode('UTF-8', $smtp->_addr($target));
 	    } else {
diff --git a/src/bin/pmg-smtp-filter b/src/bin/pmg-smtp-filter
index b070c8e..45eb125 100755
--- a/src/bin/pmg-smtp-filter
+++ b/src/bin/pmg-smtp-filter
@@ -640,6 +640,7 @@ sub handle_smtp {
 	$msginfo->{sender} = $smtp->{from};
 	$msginfo->{xforward} = $smtp->{xforward};
 	$msginfo->{targets} = $smtp->{to};
+	$msginfo->{param} = $smtp->{param};
 
 	my $dkim_sign = $msginfo->{trusted} && $pmg_cfg->get('admin', 'dkim_sign');
 	if ($dkim_sign) {
-- 
2.30.2





  parent reply	other threads:[~2021-11-25 19:20 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-25 19:19 [pmg-devel] [PATCH pmg-api v3 0/2] fix #2795 - add DSN support Stoiko Ivanov
2021-11-25 19:20 ` [pmg-devel] [PATCH pmg-api v3 1/2] partially fix #2795: allow for '>' in smtp parameters Stoiko Ivanov
2021-11-25 19:20 ` Stoiko Ivanov [this message]
2021-11-26 11:59 ` [pmg-devel] applied-series: [PATCH pmg-api v3 0/2] fix #2795 - add DSN support Stoiko Ivanov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211125192001.150932-3-s.ivanov@proxmox.com \
    --to=s.ivanov@proxmox.com \
    --cc=pmg-devel@lists.proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal