* [pve-devel] [PATCH qemu-server] template backup: work around regression with IDE/SATA and blockdev
@ 2025-08-12 13:03 Fiona Ebner
2025-08-12 13:14 ` Fabian Grünbichler
0 siblings, 1 reply; 3+ messages in thread
From: Fiona Ebner @ 2025-08-12 13:03 UTC (permalink / raw)
To: pve-devel
IDE/SATA do not support being configured as read-only, so the inserted
block node needs to be marked as writable too, but -blockdev will
complain if it's marked as writable but the actual backing device is
read-only (e.g. read-only LV).
To cleanly solve this, 'ide-hd', which is used by both IDE and SATA,
should not be used as the front-end, but disks be attached differently
for template backup.
For now, use a stop-gap fix, setting the machine version to pre-10.0
in the temporary config used to start the template VM in pre-launch
mode for backup. With -drive, it seems that the check for the actual
device being the same r/rw mode is not done.
Reported in the community forum:
https://forum.proxmox.com/threads/169638/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
---
src/PVE/QemuServer.pm | 7 +++++++
src/test/cfg2cmd/efi-raw-template.conf.cmd | 7 +++----
.../cfg2cmd/q35-linux-hostpci-template.conf.cmd | 12 +++++-------
src/test/cfg2cmd/simple1-template.conf.cmd | 15 +++++++--------
4 files changed, 22 insertions(+), 19 deletions(-)
diff --git a/src/PVE/QemuServer.pm b/src/PVE/QemuServer.pm
index cfc54568..6781311e 100644
--- a/src/PVE/QemuServer.pm
+++ b/src/PVE/QemuServer.pm
@@ -3212,6 +3212,13 @@ sub config_to_command {
template => 1, # in case below code checks that
kvm => 0, # to prevent an error on hosts without virtualization extensions
vga => 'none', # to not start a vnc server
+ # FIXME machine version is set to pre-10.0, because IDE/SATA do not support being
+ # configured as read-only, so the inserted block node needs to be marked as writable
+ # too, but -blockdev will complain if it's marked as writable but the actual backing
+ # device is read-only (e.g. read-only LV).
+ # To cleanly solve this, ide-hd should not be used as the front-end, but disks be
+ # attached differently for template backup.
+ machine => 'pc-i440fx-9.2+pve1',
scsihw => $conf->{scsihw}, # so that the scsi disks are correctly added
bios => $conf->{bios}, # so efidisk gets included if it exists
name => $conf->{name}, # so it's correct in the process list
diff --git a/src/test/cfg2cmd/efi-raw-template.conf.cmd b/src/test/cfg2cmd/efi-raw-template.conf.cmd
index d027d776..3a6c1b04 100644
--- a/src/test/cfg2cmd/efi-raw-template.conf.cmd
+++ b/src/test/cfg2cmd/efi-raw-template.conf.cmd
@@ -8,9 +8,8 @@
-mon 'chardev=qmp-event,mode=control' \
-pidfile /var/run/qemu-server/8006.pid \
-daemonize \
- -object '{"id":"throttle-drive-efidisk0","limits":{},"qom-type":"throttle-group"}' \
- -blockdev '{"driver":"raw","file":{"driver":"file","filename":"/usr/share/pve-edk2-firmware//OVMF_CODE.fd"},"node-name":"pflash0","read-only":true}' \
- -blockdev '{"detect-zeroes":"on","discard":"ignore","driver":"throttle","file":{"cache":{"direct":false,"no-flush":false},"detect-zeroes":"on","discard":"ignore","driver":"raw","file":{"aio":"io_uring","cache":{"direct":false,"no-flush":false},"detect-zeroes":"on","discard":"ignore","driver":"file","filename":"/var/lib/vz/images/100/base-100-disk-0.raw","node-name":"e2ab65c8ec567acbeb645244f6c4982","read-only":true},"node-name":"f2ab65c8ec567acbeb645244f6c4982","read-only":true,"size":131072},"node-name":"drive-efidisk0","read-only":true,"throttle-group":"throttle-drive-efidisk0"}' \
+ -drive 'if=pflash,unit=0,format=raw,readonly=on,file=/usr/share/pve-edk2-firmware//OVMF_CODE.fd' \
+ -drive 'if=pflash,unit=1,id=drive-efidisk0,format=raw,file=/var/lib/vz/images/100/base-100-disk-0.raw,size=131072,readonly=on' \
-smp '1,sockets=1,cores=1,maxcpus=1' \
-nodefaults \
-boot 'menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg' \
@@ -26,5 +25,5 @@
-device 'usb-tablet,id=tablet,bus=uhci.0,port=1' \
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
- -machine 'pflash0=pflash0,pflash1=drive-efidisk0,accel=tcg,type=pc+pve0' \
+ -machine 'accel=tcg,type=pc-i440fx-9.2+pve1' \
-snapshot
diff --git a/src/test/cfg2cmd/q35-linux-hostpci-template.conf.cmd b/src/test/cfg2cmd/q35-linux-hostpci-template.conf.cmd
index 20e3c81d..7172fb4c 100644
--- a/src/test/cfg2cmd/q35-linux-hostpci-template.conf.cmd
+++ b/src/test/cfg2cmd/q35-linux-hostpci-template.conf.cmd
@@ -8,9 +8,8 @@
-mon 'chardev=qmp-event,mode=control' \
-pidfile /var/run/qemu-server/8006.pid \
-daemonize \
- -object '{"id":"throttle-drive-efidisk0","limits":{},"qom-type":"throttle-group"}' \
- -blockdev '{"driver":"raw","file":{"driver":"file","filename":"/usr/share/pve-edk2-firmware//OVMF_CODE.fd"},"node-name":"pflash0","read-only":true}' \
- -blockdev '{"detect-zeroes":"on","discard":"ignore","driver":"throttle","file":{"cache":{"direct":false,"no-flush":false},"detect-zeroes":"on","discard":"ignore","driver":"qcow2","file":{"aio":"io_uring","cache":{"direct":false,"no-flush":false},"detect-zeroes":"on","discard":"ignore","driver":"file","filename":"/var/lib/vz/images/100/base-100-disk-1.qcow2","node-name":"eb6bec0e3c391fabb7fb7dd73ced9bf","read-only":true},"node-name":"fb6bec0e3c391fabb7fb7dd73ced9bf","read-only":true},"node-name":"drive-efidisk0","read-only":true,"throttle-group":"throttle-drive-efidisk0"}' \
+ -drive 'if=pflash,unit=0,format=raw,readonly=on,file=/usr/share/pve-edk2-firmware//OVMF_CODE.fd' \
+ -drive 'if=pflash,unit=1,id=drive-efidisk0,format=qcow2,file=/var/lib/vz/images/100/base-100-disk-1.qcow2,readonly=on' \
-smp '1,sockets=1,cores=1,maxcpus=1' \
-nodefaults \
-boot 'menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg' \
@@ -18,7 +17,6 @@
-nographic \
-cpu qemu64 \
-m 512 \
- -object '{"id":"throttle-drive-scsi0","limits":{},"qom-type":"throttle-group"}' \
-global 'PIIX4_PM.disable_s3=1' \
-global 'PIIX4_PM.disable_s4=1' \
-device 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' \
@@ -28,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
- -blockdev '{"detect-zeroes":"on","discard":"ignore","driver":"throttle","file":{"cache":{"direct":true,"no-flush":false},"detect-zeroes":"on","discard":"ignore","driver":"raw","file":{"aio":"io_uring","cache":{"direct":true,"no-flush":false},"detect-zeroes":"on","discard":"ignore","driver":"file","filename":"/var/lib/vz/images/100/base-100-disk-2.raw","node-name":"e24dfe239201bb9924fc4cfb899ca70","read-only":true},"node-name":"f24dfe239201bb9924fc4cfb899ca70","read-only":true},"node-name":"drive-scsi0","read-only":true,"throttle-group":"throttle-drive-scsi0"}' \
- -device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,device_id=drive-scsi0,write-cache=on' \
- -machine 'pflash0=pflash0,pflash1=drive-efidisk0,accel=tcg,type=pc+pve0' \
+ -drive 'file=/var/lib/vz/images/100/base-100-disk-2.raw,if=none,id=drive-scsi0,format=raw,cache=none,aio=io_uring,detect-zeroes=on,readonly=on' \
+ -device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0' \
+ -machine 'accel=tcg,type=pc-i440fx-9.2+pve1' \
-snapshot
diff --git a/src/test/cfg2cmd/simple1-template.conf.cmd b/src/test/cfg2cmd/simple1-template.conf.cmd
index df51a4a5..5bde9fd6 100644
--- a/src/test/cfg2cmd/simple1-template.conf.cmd
+++ b/src/test/cfg2cmd/simple1-template.conf.cmd
@@ -15,8 +15,6 @@
-nographic \
-cpu qemu64 \
-m 512 \
- -object '{"id":"throttle-drive-scsi0","limits":{},"qom-type":"throttle-group"}' \
- -object '{"id":"throttle-drive-sata0","limits":{},"qom-type":"throttle-group"}' \
-global 'PIIX4_PM.disable_s3=1' \
-global 'PIIX4_PM.disable_s4=1' \
-device 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' \
@@ -25,12 +23,13 @@
-device 'usb-tablet,id=tablet,bus=uhci.0,port=1' \
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
- -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
+ -drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
+ -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
- -blockdev '{"detect-zeroes":"unmap","discard":"unmap","driver":"throttle","file":{"cache":{"direct":true,"no-flush":false},"detect-zeroes":"unmap","discard":"unmap","driver":"qcow2","file":{"aio":"io_uring","cache":{"direct":true,"no-flush":false},"detect-zeroes":"unmap","discard":"unmap","driver":"file","filename":"/var/lib/vz/images/8006/base-8006-disk-1.qcow2","node-name":"e1085774206ae4a6b6bf8426ff08f16","read-only":true},"node-name":"f1085774206ae4a6b6bf8426ff08f16","read-only":true},"node-name":"drive-scsi0","read-only":true,"throttle-group":"throttle-drive-scsi0"}' \
- -device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,device_id=drive-scsi0,write-cache=on' \
+ -drive 'file=/var/lib/vz/images/8006/base-8006-disk-1.qcow2,if=none,id=drive-scsi0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap,readonly=on' \
+ -device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0' \
-device 'ahci,id=ahci0,multifunction=on,bus=pci.0,addr=0x7' \
- -blockdev '{"detect-zeroes":"unmap","discard":"unmap","driver":"throttle","file":{"cache":{"direct":true,"no-flush":false},"detect-zeroes":"unmap","discard":"unmap","driver":"qcow2","file":{"aio":"io_uring","cache":{"direct":true,"no-flush":false},"detect-zeroes":"unmap","discard":"unmap","driver":"file","filename":"/var/lib/vz/images/8006/base-8006-disk-0.qcow2","node-name":"eab334c2e07734480f33dd80d89871b","read-only":false},"node-name":"fab334c2e07734480f33dd80d89871b","read-only":false},"node-name":"drive-sata0","read-only":false,"throttle-group":"throttle-drive-sata0"}' \
- -device 'ide-hd,bus=ahci0.0,drive=drive-sata0,id=sata0,write-cache=on' \
- -machine 'accel=tcg,smm=off,type=pc+pve0' \
+ -drive 'file=/var/lib/vz/images/8006/base-8006-disk-0.qcow2,if=none,id=drive-sata0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
+ -device 'ide-hd,bus=ahci0.0,drive=drive-sata0,id=sata0' \
+ -machine 'accel=tcg,smm=off,type=pc-i440fx-9.2+pve1' \
-snapshot
--
2.47.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [pve-devel] [PATCH qemu-server] template backup: work around regression with IDE/SATA and blockdev
2025-08-12 13:03 [pve-devel] [PATCH qemu-server] template backup: work around regression with IDE/SATA and blockdev Fiona Ebner
@ 2025-08-12 13:14 ` Fabian Grünbichler
2025-08-12 14:48 ` [pve-devel] superseded: " Fiona Ebner
0 siblings, 1 reply; 3+ messages in thread
From: Fabian Grünbichler @ 2025-08-12 13:14 UTC (permalink / raw)
To: Proxmox VE development discussion
On August 12, 2025 3:03 pm, Fiona Ebner wrote:
> IDE/SATA do not support being configured as read-only, so the inserted
> block node needs to be marked as writable too, but -blockdev will
> complain if it's marked as writable but the actual backing device is
> read-only (e.g. read-only LV).
>
> To cleanly solve this, 'ide-hd', which is used by both IDE and SATA,
> should not be used as the front-end, but disks be attached differently
> for template backup.
>
> For now, use a stop-gap fix, setting the machine version to pre-10.0
> in the temporary config used to start the template VM in pre-launch
> mode for backup. With -drive, it seems that the check for the actual
> device being the same r/rw mode is not done.
>
> Reported in the community forum:
> https://forum.proxmox.com/threads/169638/
>
> Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
> ---
> src/PVE/QemuServer.pm | 7 +++++++
> src/test/cfg2cmd/efi-raw-template.conf.cmd | 7 +++----
> .../cfg2cmd/q35-linux-hostpci-template.conf.cmd | 12 +++++-------
> src/test/cfg2cmd/simple1-template.conf.cmd | 15 +++++++--------
> 4 files changed, 22 insertions(+), 19 deletions(-)
>
> diff --git a/src/PVE/QemuServer.pm b/src/PVE/QemuServer.pm
> index cfc54568..6781311e 100644
> --- a/src/PVE/QemuServer.pm
> +++ b/src/PVE/QemuServer.pm
> @@ -3212,6 +3212,13 @@ sub config_to_command {
> template => 1, # in case below code checks that
> kvm => 0, # to prevent an error on hosts without virtualization extensions
> vga => 'none', # to not start a vnc server
> + # FIXME machine version is set to pre-10.0, because IDE/SATA do not support being
> + # configured as read-only, so the inserted block node needs to be marked as writable
> + # too, but -blockdev will complain if it's marked as writable but the actual backing
> + # device is read-only (e.g. read-only LV).
> + # To cleanly solve this, ide-hd should not be used as the front-end, but disks be
> + # attached differently for template backup.
> + machine => 'pc-i440fx-9.2+pve1',
this should be conditionalized on not using snapshot-as-volume-chain
qcow2 images and/or IDE devices being present to avoid regressing not
yet broken setups..
> scsihw => $conf->{scsihw}, # so that the scsi disks are correctly added
> bios => $conf->{bios}, # so efidisk gets included if it exists
> name => $conf->{name}, # so it's correct in the process list
> diff --git a/src/test/cfg2cmd/efi-raw-template.conf.cmd b/src/test/cfg2cmd/efi-raw-template.conf.cmd
> index d027d776..3a6c1b04 100644
> --- a/src/test/cfg2cmd/efi-raw-template.conf.cmd
> +++ b/src/test/cfg2cmd/efi-raw-template.conf.cmd
> @@ -8,9 +8,8 @@
> -mon 'chardev=qmp-event,mode=control' \
> -pidfile /var/run/qemu-server/8006.pid \
> -daemonize \
> - -object '{"id":"throttle-drive-efidisk0","limits":{},"qom-type":"throttle-group"}' \
> - -blockdev '{"driver":"raw","file":{"driver":"file","filename":"/usr/share/pve-edk2-firmware//OVMF_CODE.fd"},"node-name":"pflash0","read-only":true}' \
> - -blockdev '{"detect-zeroes":"on","discard":"ignore","driver":"throttle","file":{"cache":{"direct":false,"no-flush":false},"detect-zeroes":"on","discard":"ignore","driver":"raw","file":{"aio":"io_uring","cache":{"direct":false,"no-flush":false},"detect-zeroes":"on","discard":"ignore","driver":"file","filename":"/var/lib/vz/images/100/base-100-disk-0.raw","node-name":"e2ab65c8ec567acbeb645244f6c4982","read-only":true},"node-name":"f2ab65c8ec567acbeb645244f6c4982","read-only":true,"size":131072},"node-name":"drive-efidisk0","read-only":true,"throttle-group":"throttle-drive-efidisk0"}' \
> + -drive 'if=pflash,unit=0,format=raw,readonly=on,file=/usr/share/pve-edk2-firmware//OVMF_CODE.fd' \
> + -drive 'if=pflash,unit=1,id=drive-efidisk0,format=raw,file=/var/lib/vz/images/100/base-100-disk-0.raw,size=131072,readonly=on' \
> -smp '1,sockets=1,cores=1,maxcpus=1' \
> -nodefaults \
> -boot 'menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg' \
> @@ -26,5 +25,5 @@
> -device 'usb-tablet,id=tablet,bus=uhci.0,port=1' \
> -device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
> -iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
> - -machine 'pflash0=pflash0,pflash1=drive-efidisk0,accel=tcg,type=pc+pve0' \
> + -machine 'accel=tcg,type=pc-i440fx-9.2+pve1' \
> -snapshot
> diff --git a/src/test/cfg2cmd/q35-linux-hostpci-template.conf.cmd b/src/test/cfg2cmd/q35-linux-hostpci-template.conf.cmd
> index 20e3c81d..7172fb4c 100644
> --- a/src/test/cfg2cmd/q35-linux-hostpci-template.conf.cmd
> +++ b/src/test/cfg2cmd/q35-linux-hostpci-template.conf.cmd
> @@ -8,9 +8,8 @@
> -mon 'chardev=qmp-event,mode=control' \
> -pidfile /var/run/qemu-server/8006.pid \
> -daemonize \
> - -object '{"id":"throttle-drive-efidisk0","limits":{},"qom-type":"throttle-group"}' \
> - -blockdev '{"driver":"raw","file":{"driver":"file","filename":"/usr/share/pve-edk2-firmware//OVMF_CODE.fd"},"node-name":"pflash0","read-only":true}' \
> - -blockdev '{"detect-zeroes":"on","discard":"ignore","driver":"throttle","file":{"cache":{"direct":false,"no-flush":false},"detect-zeroes":"on","discard":"ignore","driver":"qcow2","file":{"aio":"io_uring","cache":{"direct":false,"no-flush":false},"detect-zeroes":"on","discard":"ignore","driver":"file","filename":"/var/lib/vz/images/100/base-100-disk-1.qcow2","node-name":"eb6bec0e3c391fabb7fb7dd73ced9bf","read-only":true},"node-name":"fb6bec0e3c391fabb7fb7dd73ced9bf","read-only":true},"node-name":"drive-efidisk0","read-only":true,"throttle-group":"throttle-drive-efidisk0"}' \
> + -drive 'if=pflash,unit=0,format=raw,readonly=on,file=/usr/share/pve-edk2-firmware//OVMF_CODE.fd' \
> + -drive 'if=pflash,unit=1,id=drive-efidisk0,format=qcow2,file=/var/lib/vz/images/100/base-100-disk-1.qcow2,readonly=on' \
> -smp '1,sockets=1,cores=1,maxcpus=1' \
> -nodefaults \
> -boot 'menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg' \
> @@ -18,7 +17,6 @@
> -nographic \
> -cpu qemu64 \
> -m 512 \
> - -object '{"id":"throttle-drive-scsi0","limits":{},"qom-type":"throttle-group"}' \
> -global 'PIIX4_PM.disable_s3=1' \
> -global 'PIIX4_PM.disable_s4=1' \
> -device 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' \
> @@ -28,7 +26,7 @@
> -device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
> -iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
> -device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
> - -blockdev '{"detect-zeroes":"on","discard":"ignore","driver":"throttle","file":{"cache":{"direct":true,"no-flush":false},"detect-zeroes":"on","discard":"ignore","driver":"raw","file":{"aio":"io_uring","cache":{"direct":true,"no-flush":false},"detect-zeroes":"on","discard":"ignore","driver":"file","filename":"/var/lib/vz/images/100/base-100-disk-2.raw","node-name":"e24dfe239201bb9924fc4cfb899ca70","read-only":true},"node-name":"f24dfe239201bb9924fc4cfb899ca70","read-only":true},"node-name":"drive-scsi0","read-only":true,"throttle-group":"throttle-drive-scsi0"}' \
> - -device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,device_id=drive-scsi0,write-cache=on' \
> - -machine 'pflash0=pflash0,pflash1=drive-efidisk0,accel=tcg,type=pc+pve0' \
> + -drive 'file=/var/lib/vz/images/100/base-100-disk-2.raw,if=none,id=drive-scsi0,format=raw,cache=none,aio=io_uring,detect-zeroes=on,readonly=on' \
> + -device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0' \
> + -machine 'accel=tcg,type=pc-i440fx-9.2+pve1' \
> -snapshot
> diff --git a/src/test/cfg2cmd/simple1-template.conf.cmd b/src/test/cfg2cmd/simple1-template.conf.cmd
> index df51a4a5..5bde9fd6 100644
> --- a/src/test/cfg2cmd/simple1-template.conf.cmd
> +++ b/src/test/cfg2cmd/simple1-template.conf.cmd
> @@ -15,8 +15,6 @@
> -nographic \
> -cpu qemu64 \
> -m 512 \
> - -object '{"id":"throttle-drive-scsi0","limits":{},"qom-type":"throttle-group"}' \
> - -object '{"id":"throttle-drive-sata0","limits":{},"qom-type":"throttle-group"}' \
> -global 'PIIX4_PM.disable_s3=1' \
> -global 'PIIX4_PM.disable_s4=1' \
> -device 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' \
> @@ -25,12 +23,13 @@
> -device 'usb-tablet,id=tablet,bus=uhci.0,port=1' \
> -device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
> -iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
> - -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
> + -drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
> + -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
> -device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
> - -blockdev '{"detect-zeroes":"unmap","discard":"unmap","driver":"throttle","file":{"cache":{"direct":true,"no-flush":false},"detect-zeroes":"unmap","discard":"unmap","driver":"qcow2","file":{"aio":"io_uring","cache":{"direct":true,"no-flush":false},"detect-zeroes":"unmap","discard":"unmap","driver":"file","filename":"/var/lib/vz/images/8006/base-8006-disk-1.qcow2","node-name":"e1085774206ae4a6b6bf8426ff08f16","read-only":true},"node-name":"f1085774206ae4a6b6bf8426ff08f16","read-only":true},"node-name":"drive-scsi0","read-only":true,"throttle-group":"throttle-drive-scsi0"}' \
> - -device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,device_id=drive-scsi0,write-cache=on' \
> + -drive 'file=/var/lib/vz/images/8006/base-8006-disk-1.qcow2,if=none,id=drive-scsi0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap,readonly=on' \
> + -device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0' \
> -device 'ahci,id=ahci0,multifunction=on,bus=pci.0,addr=0x7' \
> - -blockdev '{"detect-zeroes":"unmap","discard":"unmap","driver":"throttle","file":{"cache":{"direct":true,"no-flush":false},"detect-zeroes":"unmap","discard":"unmap","driver":"qcow2","file":{"aio":"io_uring","cache":{"direct":true,"no-flush":false},"detect-zeroes":"unmap","discard":"unmap","driver":"file","filename":"/var/lib/vz/images/8006/base-8006-disk-0.qcow2","node-name":"eab334c2e07734480f33dd80d89871b","read-only":false},"node-name":"fab334c2e07734480f33dd80d89871b","read-only":false},"node-name":"drive-sata0","read-only":false,"throttle-group":"throttle-drive-sata0"}' \
> - -device 'ide-hd,bus=ahci0.0,drive=drive-sata0,id=sata0,write-cache=on' \
> - -machine 'accel=tcg,smm=off,type=pc+pve0' \
> + -drive 'file=/var/lib/vz/images/8006/base-8006-disk-0.qcow2,if=none,id=drive-sata0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
> + -device 'ide-hd,bus=ahci0.0,drive=drive-sata0,id=sata0' \
> + -machine 'accel=tcg,smm=off,type=pc-i440fx-9.2+pve1' \
> -snapshot
> --
> 2.47.2
>
>
>
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>
>
>
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* [pve-devel] superseded: [PATCH qemu-server] template backup: work around regression with IDE/SATA and blockdev
2025-08-12 13:14 ` Fabian Grünbichler
@ 2025-08-12 14:48 ` Fiona Ebner
0 siblings, 0 replies; 3+ messages in thread
From: Fiona Ebner @ 2025-08-12 14:48 UTC (permalink / raw)
To: Proxmox VE development discussion, Fabian Grünbichler
Am 12.08.25 um 3:14 PM schrieb Fabian Grünbichler:
> On August 12, 2025 3:03 pm, Fiona Ebner wrote:
>> + machine => 'pc-i440fx-9.2+pve1',
>
> this should be conditionalized on not using snapshot-as-volume-chain
> qcow2 images and/or IDE devices being present to avoid regressing not
> yet broken setups..
Nice catch! I went with another, future-proof approach in v2, using
ide-cd instead of ide-hd since most of the configuration and code is
shared for the two in QEMU.
superseded by:
https://lore.proxmox.com/pve-devel/20250812143900.138723-1-f.ebner@proxmox.com/T/
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-08-12 14:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-08-12 13:03 [pve-devel] [PATCH qemu-server] template backup: work around regression with IDE/SATA and blockdev Fiona Ebner
2025-08-12 13:14 ` Fabian Grünbichler
2025-08-12 14:48 ` [pve-devel] superseded: " Fiona Ebner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.