From: "Fabian Grünbichler" <f.gruenbichler@proxmox.com>
To: Proxmox VE development discussion <pve-devel@lists.proxmox.com>
Subject: [pve-devel] applied-series: [PATCH-SERIES qemu-server v2 0/8] blockdev and snapshot-as-volume-chain on LVM fixes
Date: Fri, 25 Jul 2025 14:15:29 +0200 [thread overview]
Message-ID: <1753445470.v5oz7vpfnv.astroid@yuna.none> (raw)
In-Reply-To: <20250725105109.54093-1-f.ebner@proxmox.com>
without the last patch, as discussed off-list - it's a bit involved,
we'll see if we can find a better way to handle this, and for the
current stop-gap measure the simple approach is good enough.
added a FIXME instead so we don't forget.
On July 25, 2025 12:50 pm, Fiona Ebner wrote:
> Changes in v2:
> * add missing check for qcow2 format for qemu-img convert
> * add patch to improve File::stat mocking in tests
> * add patch to re-use blockdev infrastructure for qemu-img case
>
> First part is fixing discard in combination with -blockdev. The option
> needs to be set for the whole throttle->fmt->file chain to make it
> work.
>
> Second part is fixing bug #6543, qcow2 can grow beyond what qemu-img
> measure reports, because of fragmentation when the discard-no-unref
> option is not used.
>
> There is a fix-6543 branch on my staff repo, should the patches
> touching tests be messed up again because of the overly long line in
> the expected test output.
>
> Fiona Ebner (8):
> blockdev: helper to add common options
> blockdev: fix discard
> tests: image convert: avoid hard-coded VM ID in result
> tests: image convert: properly set snapshot-as-volume-chain option
> tests: image convert: add tests where storages with
> 'snapshot-as-volume-chain' are the target
> fix #6543: use qcow2 'discard-no-unref' option when using
> snapshot-as-volume-chain
> tests: cfg2cmd: improve mocking File::stat
> image convert: re-use generate_drive_blockdev()
>
> src/PVE/QemuServer/Blockdev.pm | 36 +++++++---
> src/PVE/QemuServer/QemuImage.pm | 72 +++++++++++++++++++
> src/test/cfg2cmd/aio.conf.cmd | 28 ++++----
> src/test/cfg2cmd/bootorder-empty.conf.cmd | 6 +-
> src/test/cfg2cmd/bootorder-legacy.conf.cmd | 6 +-
> src/test/cfg2cmd/bootorder.conf.cmd | 6 +-
> ...putype-icelake-client-deprecation.conf.cmd | 2 +-
> .../cfg2cmd/efi-ovmf-without-efidisk.conf.cmd | 2 +-
> src/test/cfg2cmd/efi-raw-template.conf.cmd | 2 +-
> src/test/cfg2cmd/efi-raw.conf.cmd | 2 +-
> .../cfg2cmd/efi-secboot-and-tpm-q35.conf.cmd | 2 +-
> src/test/cfg2cmd/efi-secboot-and-tpm.conf.cmd | 2 +-
> src/test/cfg2cmd/efidisk-on-rbd.conf.cmd | 2 +-
> src/test/cfg2cmd/ide.conf.cmd | 2 +-
> src/test/cfg2cmd/q35-ide.conf.cmd | 2 +-
> .../q35-linux-hostpci-mapping.conf.cmd | 2 +-
> .../q35-linux-hostpci-multifunction.conf.cmd | 2 +-
> .../q35-linux-hostpci-template.conf.cmd | 4 +-
> ...q35-linux-hostpci-x-pci-overrides.conf.cmd | 2 +-
> src/test/cfg2cmd/q35-linux-hostpci.conf.cmd | 2 +-
> src/test/cfg2cmd/q35-simple.conf.cmd | 2 +-
> src/test/cfg2cmd/seabios_serial.conf.cmd | 2 +-
> src/test/cfg2cmd/sev-es.conf.cmd | 2 +-
> src/test/cfg2cmd/sev-std.conf.cmd | 2 +-
> src/test/cfg2cmd/simple-backingchain.conf.cmd | 4 +-
> src/test/cfg2cmd/simple-btrfs.conf.cmd | 8 +--
> src/test/cfg2cmd/simple-cifs.conf.cmd | 8 +--
> .../cfg2cmd/simple-disk-passthrough.conf.cmd | 4 +-
> src/test/cfg2cmd/simple-lvm.conf.cmd | 8 +--
> src/test/cfg2cmd/simple-lvmthin.conf.cmd | 8 +--
> src/test/cfg2cmd/simple-rbd.conf.cmd | 16 ++---
> src/test/cfg2cmd/simple-virtio-blk.conf.cmd | 2 +-
> .../cfg2cmd/simple-zfs-over-iscsi.conf.cmd | 8 +--
> src/test/cfg2cmd/simple1-template.conf.cmd | 4 +-
> src/test/cfg2cmd/simple1.conf.cmd | 2 +-
> src/test/run_config2command_tests.pl | 8 +--
> src/test/run_qemu_img_convert_tests.pl | 61 +++++++++++++++-
> 37 files changed, 239 insertions(+), 94 deletions(-)
>
> --
> 2.47.2
>
>
>
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>
>
>
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
prev parent reply other threads:[~2025-07-25 12:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-25 10:50 [pve-devel] " Fiona Ebner
2025-07-25 10:50 ` [pve-devel] [PATCH qemu-server v2 1/8] blockdev: helper to add common options Fiona Ebner
2025-07-25 10:50 ` [pve-devel] [PATCH qemu-server v2 2/8] blockdev: fix discard Fiona Ebner
2025-07-25 10:50 ` [pve-devel] [PATCH qemu-server v2 3/8] tests: image convert: avoid hard-coded VM ID in result Fiona Ebner
2025-07-25 10:50 ` [pve-devel] [PATCH qemu-server v2 4/8] tests: image convert: properly set snapshot-as-volume-chain option Fiona Ebner
2025-07-25 10:50 ` [pve-devel] [PATCH qemu-server v2 5/8] tests: image convert: add tests where storages with 'snapshot-as-volume-chain' are the target Fiona Ebner
2025-07-25 10:50 ` [pve-devel] [PATCH qemu-server v2 6/8] fix #6543: use qcow2 'discard-no-unref' option when using snapshot-as-volume-chain Fiona Ebner
2025-07-25 10:50 ` [pve-devel] [PATCH qemu-server v2 7/8] tests: cfg2cmd: improve mocking File::stat Fiona Ebner
2025-07-25 10:50 ` [pve-devel] [PATCH qemu-server v2 8/8] image convert: re-use generate_drive_blockdev() Fiona Ebner
2025-07-25 12:15 ` Fabian Grünbichler [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1753445470.v5oz7vpfnv.astroid@yuna.none \
--to=f.gruenbichler@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.