all lists on lists.proxmox.com
 help / color / mirror / Atom feed
From: "Fabian Grünbichler" <f.gruenbichler@proxmox.com>
To: Proxmox Backup Server development discussion
	<pbs-devel@lists.proxmox.com>
Subject: [pbs-devel] applied: [PATCH v5 proxmox-backup] client: pxar: fix race in pxar backup stream
Date: Tue, 11 Feb 2025 12:30:43 +0100	[thread overview]
Message-ID: <1739273353.vtm1zn5r0f.astroid@yuna.none> (raw)
In-Reply-To: <20250124124635.291858-1-c.ebner@proxmox.com>

On January 24, 2025 1:46 pm, Christian Ebner wrote:
> Fixes a race condition where the backup upload stream can miss an
> error returned by pxar::create_archive, because the error state is
> only set after the backup stream was already polled.
> 
> On instantiation, `PxarBackupStream` spawns a future handling the
> pxar archive creation, which sends the encoded pxar archive stream
> (or streams in case of split archives) through a channel, received
> by the pxar backup stream on polling.
> 
> In case this channel is closed as signaled by returning an error, the
> poll logic will propagate an eventual error occurred during pxar
> creation by taking it from the `PxarBackupStream`.
> 
> As this error might not have been set just yet, this can lead to
> incorrectly terminating a backup snapshot with success, eventhough an
> error occurred.
> 
> To fix this, introduce a dedicated notifier for each stream instance
> and wait for the archiver to signal it has finished via this
> notification channel. In addition, extend the `PxarBackupStream` by a
> `finished` flag to allow early return on subsequent polls, which
> would otherwise block, waiting for a new notification.
> 
> In case of premature termination of the pxar backup stream, no
> additional measures have to been taken, as the abort handle already
> terminates the archive creation.
> 
> Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
> ---
> Changes since version 4 (thanks a lot Fabian for comments!):
> - Drop unneeded shared state, only store error
> - Use dedicated notification channel instances per stream, so each
>   channel gets notified for sure.
> - Use `finished` flag per `PxarBackupStream` instance, allowing on early
>   return if the archiver finish has already been seen, avoiding to block
>   again on awaiting a notification.
> 
>  pbs-client/src/pxar_backup_stream.rs | 34 +++++++++++++++++++++++++---
>  1 file changed, 31 insertions(+), 3 deletions(-)
> 
> diff --git a/pbs-client/src/pxar_backup_stream.rs b/pbs-client/src/pxar_backup_stream.rs
> index 2bfb5cf29..1303e8503 100644
> --- a/pbs-client/src/pxar_backup_stream.rs
> +++ b/pbs-client/src/pxar_backup_stream.rs
> @@ -11,6 +11,7 @@ use futures::stream::Stream;
>  use nix::dir::Dir;
>  use nix::fcntl::OFlag;
>  use nix::sys::stat::Mode;
> +use tokio::sync::Notify;
>  
>  use proxmox_async::blocking::TokioWriterAdapter;
>  use proxmox_io::StdChannelWriter;
> @@ -31,6 +32,8 @@ pub struct PxarBackupStream {
>      pub suggested_boundaries: Option<std::sync::mpsc::Receiver<u64>>,
>      handle: Option<AbortHandle>,
>      error: Arc<Mutex<Option<Error>>>,
> +    finished: bool,
> +    archiver_finished_notification: Arc<Notify>,
>  }
>  
>  impl Drop for PxarBackupStream {
> @@ -80,6 +83,10 @@ impl PxarBackupStream {
>  
>          let error = Arc::new(Mutex::new(None));
>          let error2 = Arc::clone(&error);
> +        let stream_notifier = Arc::new(Notify::new());
> +        let stream_notification_receiver = stream_notifier.clone();
> +        let payload_stream_notifier = Arc::new(Notify::new());
> +        let payload_stream_notification_receiver = payload_stream_notifier.clone();
>          let handler = async move {
>              if let Err(err) = crate::pxar::create_archive(
>                  dir,
> @@ -101,6 +108,10 @@ impl PxarBackupStream {
>                  let mut error = error2.lock().unwrap();
>                  *error = Some(err);
>              }
> +
> +            // Notify upload streams that archiver is finished (with or without error)
> +            stream_notifier.notify_one();
> +            payload_stream_notifier.notify_one();
>          };
>  
>          let (handle, registration) = AbortHandle::new_pair();
> @@ -112,6 +123,8 @@ impl PxarBackupStream {
>              suggested_boundaries: None,
>              handle: Some(handle.clone()),
>              error: Arc::clone(&error),
> +            finished: false,
> +            archiver_finished_notification: stream_notification_receiver,
>          };
>  
>          let backup_payload_stream = payload_rx.map(|rx| Self {
> @@ -119,6 +132,8 @@ impl PxarBackupStream {
>              suggested_boundaries: suggested_boundaries_rx,
>              handle: Some(handle),
>              error,
> +            finished: false,
> +            archiver_finished_notification: payload_stream_notification_receiver,
>          });
>  
>          Ok((backup_stream, backup_payload_stream))
> @@ -141,18 +156,31 @@ impl Stream for PxarBackupStream {
>      type Item = Result<Vec<u8>, Error>;
>  
>      fn poll_next(self: Pin<&mut Self>, _cx: &mut Context) -> Poll<Option<Self::Item>> {
> +        let this = self.get_mut();
> +        if this.finished {
> +            // Channel has already been finished and eventual errors propagated,
> +            // early return to avoid blocking on further archiver finished notifications
> +            // by subsequent polls.
> +            return Poll::Ready(None);
> +        }
>          {
>              // limit lock scope
> -            let mut error = self.error.lock().unwrap();
> +            let mut error = this.error.lock().unwrap();
>              if let Some(err) = error.take() {
>                  return Poll::Ready(Some(Err(err)));
>              }
>          }
>  
> -        match proxmox_async::runtime::block_in_place(|| self.rx.as_ref().unwrap().recv()) {
> +        match proxmox_async::runtime::block_in_place(|| this.rx.as_ref().unwrap().recv()) {
>              Ok(data) => Poll::Ready(Some(data)),
>              Err(_) => {
> -                let mut error = self.error.lock().unwrap();
> +                // Wait for archiver to finish
> +                proxmox_async::runtime::block_on(this.archiver_finished_notification.notified());
> +                // Never block for archiver finished notification on subsequent calls.
> +                // Eventual error will already have been propagated.
> +                this.finished = true;
> +
> +                let mut error = this.error.lock().unwrap();
>                  if let Some(err) = error.take() {
>                      return Poll::Ready(Some(Err(err)));
>                  }
> -- 
> 2.39.5
> 
> 
> 
> _______________________________________________
> pbs-devel mailing list
> pbs-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pbs-devel
> 
> 
> 


_______________________________________________
pbs-devel mailing list
pbs-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pbs-devel


      reply	other threads:[~2025-02-11 11:31 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-24 12:46 [pbs-devel] " Christian Ebner
2025-02-11 11:30 ` Fabian Grünbichler [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1739273353.vtm1zn5r0f.astroid@yuna.none \
    --to=f.gruenbichler@proxmox.com \
    --cc=pbs-devel@lists.proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal