From: Aaron Lauterer <a.lauterer@proxmox.com>
To: "Proxmox VE user list" <pve-user@lists.proxmox.com>,
"Tonči Stipičević" <tonci@suma-informatika.hr>,
"PVE User List" <pve-user@pve.proxmox.com>
Subject: Re: [PVE-User] add disk back to raid10
Date: Mon, 27 Feb 2023 16:14:25 +0100 [thread overview]
Message-ID: <03515357-9a0b-e556-92aa-37decb9cb20c@proxmox.com> (raw)
In-Reply-To: <be9260f3-2f46-684f-5220-0b1e00477800@suma-informatika.hr>
I see that the zpool is on the third partition on the disk
ata-WDC_WD2000F9YZ-09N20L1_WD-WMC5C0D7E3DU-part3.
If you created the raid 10 from the installer, please follow the steps in the
admin guide [0] in the section "Changing a failed bootable device".
But instead of "zpool replace" you should run
zpool attach rpool ata-WDC_WD2000F9YZ-09N20L1_WD-WMC5C0D7E3DU-part3
/dev/disk/by-id/{new disk}-part3
The man page for the 'zpool attach' command can be viewed with 'man zpool-attach'
[0] https://pve.proxmox.com/pve-docs/pve-admin-guide.html#chapter_zfs
On 2/27/23 15:45, Tonči Stipičević wrote:
> Hello to all,
>
> I'm playing with zfs arrays. Here you can see former RAID10 because there is
> mirror-0 missing as such , because I unintentionally detached all disk
> references from this mirror-0 that used to be 2-disk mirror vdev for this raid10.
>
> 1. raid10 was OK .... this is also boot raid10
>
> 2. I physically removed one disk disk and mirror-0 became degraded
>
> 3. after lot of steps in order to replace one disk, put another-new and get all
> boot staff needed and after lot of unsuccessful tries I unintentionally ended
> up detaching all references of old "faulted" disk and mirror-0 was gone
>
> 4. Now I have unnormal raid with two striped vdevs (see below), but one of them
> is just one disk , and the other one is regular mirror(-1)
>
> So, now I'm trying to attach/add new disk to this raid10 but in order to get
> mirror-0 like it was before .... How can I reference "add" or "attach" to
> make mirror-0 again (consisting of
> ata-WDC_WD2000F9YZ-09N20L1_WD-WMC5C0D7E3DU-part3 and the new disk ) ?
>
>
> Thank you very much in advance
>
> BR
>
> Tonci
>
>
> pool: rpool
> state: ONLINE
> scan: resilvered 2.34G in 01:22:54 with 0 errors on Sun Feb 26 14:13:11 2023
> config:
>
> NAME STATE READ WRITE CKSUM
> rpool ONLINE 0 0 0
> ata-WDC_WD2000F9YZ-09N20L1_WD-WMC5C0D7E3DU-part3 ONLINE 0 0 0
> mirror-1 ONLINE 0 0 0
> ata-WDC_WD2000F9YZ-09N20L1_WD-WMC1P0F7KHZM-part3 ONLINE 0
> 0 0
> ata-WDC_WD2000F9YZ-09N20L1_WD-WMC5C0D6WZT4-part3 ONLINE 0
> 0 0
> special
> mirror-2 ONLINE 0 0 0
> sde ONLINE 0 0 0
> sdf ONLINE 0 0 0
>
> errors: No known data errors
>
next prev parent reply other threads:[~2023-02-27 15:14 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-27 14:45 Tonči Stipičević
2023-02-27 15:14 ` Aaron Lauterer [this message]
2023-02-27 16:49 ` Tonči Stipičević
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=03515357-9a0b-e556-92aa-37decb9cb20c@proxmox.com \
--to=a.lauterer@proxmox.com \
--cc=pve-user@lists.proxmox.com \
--cc=pve-user@pve.proxmox.com \
--cc=tonci@suma-informatika.hr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.