From: Fiona Ebner <f.ebner@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [pve-devel] [RFC qemu-server 13/15] print drive device: don't reference any drive for 'none' starting with machine version 10.0
Date: Mon, 23 Jun 2025 17:44:23 +0200 [thread overview]
Message-ID: <20250623154433.449277-14-f.ebner@proxmox.com> (raw)
In-Reply-To: <20250623154433.449277-1-f.ebner@proxmox.com>
There will be no block node for 'none' after switching to '-blockdev'.
Co-developed-by: Alexandre Derumier <alexandre.derumier@groupe-cyllene.com>
[FE: split out from larger patch
do it also for non-SCSI cases]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
---
RFC, should be applied with the final switch to blockdev.
Changes since last time:
* udpate tests
src/PVE/QemuServer.pm | 18 +++++++++++++++---
src/test/cfg2cmd/bootorder-empty.conf.cmd | 2 +-
src/test/cfg2cmd/bootorder-legacy.conf.cmd | 2 +-
src/test/cfg2cmd/bootorder.conf.cmd | 2 +-
...cputype-icelake-client-deprecation.conf.cmd | 2 +-
src/test/cfg2cmd/seabios_serial.conf.cmd | 2 +-
src/test/cfg2cmd/simple-btrfs.conf.cmd | 2 +-
src/test/cfg2cmd/simple-cifs.conf.cmd | 2 +-
src/test/cfg2cmd/simple-rbd.conf.cmd | 2 +-
src/test/cfg2cmd/simple-virtio-blk.conf.cmd | 2 +-
.../cfg2cmd/simple-zfs-over-iscsi.conf.cmd | 2 +-
src/test/cfg2cmd/simple1-template.conf.cmd | 2 +-
src/test/cfg2cmd/simple1.conf.cmd | 2 +-
13 files changed, 27 insertions(+), 15 deletions(-)
diff --git a/src/PVE/QemuServer.pm b/src/PVE/QemuServer.pm
index 4edd1793..38272420 100644
--- a/src/PVE/QemuServer.pm
+++ b/src/PVE/QemuServer.pm
@@ -1376,7 +1376,12 @@ sub print_drivedevice_full {
my $drive_id = PVE::QemuServer::Drive::get_drive_id($drive);
if ($drive->{interface} eq 'virtio') {
my $pciaddr = print_pci_addr("$drive_id", $bridges, $arch);
- $device = "virtio-blk-pci,drive=drive-$drive_id,id=${drive_id}${pciaddr}";
+ $device = 'virtio-blk-pci';
+ # for the switch to -blockdev, there is no blockdev for 'none'
+ if (!min_version($machine_version, 10, 0) || $drive->{file} ne 'none') {
+ $device .= ",drive=drive-$drive_id";
+ }
+ $device .= ",id=${drive_id}${pciaddr}";
$device .= ",iothread=iothread-$drive_id" if $drive->{iothread};
} elsif ($drive->{interface} eq 'scsi') {
@@ -1392,7 +1397,11 @@ sub print_drivedevice_full {
$device = "scsi-$device_type,bus=$controller_prefix$controller.0,channel=0,scsi-id=0"
. ",lun=$drive->{index}";
}
- $device .= ",drive=drive-$drive_id,id=$drive_id";
+ # for the switch to -blockdev, there is no blockdev for 'none'
+ if (!min_version($machine_version, 10, 0) || $drive->{file} ne 'none') {
+ $device .= ",drive=drive-$drive_id";
+ }
+ $device .= ",id=$drive_id";
if ($drive->{ssd} && ($device_type eq 'block' || $device_type eq 'hd')) {
$device .= ",rotation_rate=1";
@@ -1432,7 +1441,10 @@ sub print_drivedevice_full {
} else {
$device .= ",bus=ahci$controller.$unit";
}
- $device .= ",drive=drive-$drive_id,id=$drive_id";
+ if (!min_version($machine_version, 10, 0) || $drive->{file} ne 'none') {
+ $device .= ",drive=drive-$drive_id";
+ }
+ $device .= ",id=$drive_id";
if ($device_type eq 'hd') {
if (my $model = $drive->{model}) {
diff --git a/src/test/cfg2cmd/bootorder-empty.conf.cmd b/src/test/cfg2cmd/bootorder-empty.conf.cmd
index e4bf4e6d..3f8fdb8e 100644
--- a/src/test/cfg2cmd/bootorder-empty.conf.cmd
+++ b/src/test/cfg2cmd/bootorder-empty.conf.cmd
@@ -28,7 +28,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2' \
-device 'lsi,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/vm-8006-disk-0.qcow2,if=none,id=drive-scsi4,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,scsi-id=4,drive=drive-scsi4,id=scsi4,write-cache=on' \
diff --git a/src/test/cfg2cmd/bootorder-legacy.conf.cmd b/src/test/cfg2cmd/bootorder-legacy.conf.cmd
index 7627780c..cd990cd8 100644
--- a/src/test/cfg2cmd/bootorder-legacy.conf.cmd
+++ b/src/test/cfg2cmd/bootorder-legacy.conf.cmd
@@ -28,7 +28,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'lsi,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/vm-8006-disk-0.qcow2,if=none,id=drive-scsi4,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,scsi-id=4,drive=drive-scsi4,id=scsi4,write-cache=on' \
diff --git a/src/test/cfg2cmd/bootorder.conf.cmd b/src/test/cfg2cmd/bootorder.conf.cmd
index 74af37e1..3cef2161 100644
--- a/src/test/cfg2cmd/bootorder.conf.cmd
+++ b/src/test/cfg2cmd/bootorder.conf.cmd
@@ -28,7 +28,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=103' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=103' \
-device 'lsi,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/vm-8006-disk-0.qcow2,if=none,id=drive-scsi4,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,scsi-id=4,drive=drive-scsi4,id=scsi4,bootindex=102,write-cache=on' \
diff --git a/src/test/cfg2cmd/cputype-icelake-client-deprecation.conf.cmd b/src/test/cfg2cmd/cputype-icelake-client-deprecation.conf.cmd
index effba2b7..e6e09278 100644
--- a/src/test/cfg2cmd/cputype-icelake-client-deprecation.conf.cmd
+++ b/src/test/cfg2cmd/cputype-icelake-client-deprecation.conf.cmd
@@ -26,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/base-8006-disk-0.qcow2,if=none,id=drive-scsi0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100,write-cache=on' \
diff --git a/src/test/cfg2cmd/seabios_serial.conf.cmd b/src/test/cfg2cmd/seabios_serial.conf.cmd
index f901a459..0eb02459 100644
--- a/src/test/cfg2cmd/seabios_serial.conf.cmd
+++ b/src/test/cfg2cmd/seabios_serial.conf.cmd
@@ -26,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/vm-8006-disk-0.qcow2,if=none,id=drive-scsi0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100,write-cache=on' \
diff --git a/src/test/cfg2cmd/simple-btrfs.conf.cmd b/src/test/cfg2cmd/simple-btrfs.conf.cmd
index 9c3f97d2..2aa2083d 100644
--- a/src/test/cfg2cmd/simple-btrfs.conf.cmd
+++ b/src/test/cfg2cmd/simple-btrfs.conf.cmd
@@ -26,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/butter/bread/images/8006/vm-8006-disk-0/disk.raw,if=none,id=drive-scsi0,discard=on,format=raw,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100,write-cache=on' \
diff --git a/src/test/cfg2cmd/simple-cifs.conf.cmd b/src/test/cfg2cmd/simple-cifs.conf.cmd
index 61e8d01e..d23a046a 100644
--- a/src/test/cfg2cmd/simple-cifs.conf.cmd
+++ b/src/test/cfg2cmd/simple-cifs.conf.cmd
@@ -24,7 +24,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/mnt/pve/cifs-store/images/8006/vm-8006-disk-0.raw,if=none,id=drive-scsi0,discard=on,format=raw,cache=none,aio=native,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,write-cache=on' \
diff --git a/src/test/cfg2cmd/simple-rbd.conf.cmd b/src/test/cfg2cmd/simple-rbd.conf.cmd
index ea5934c4..df7cba3f 100644
--- a/src/test/cfg2cmd/simple-rbd.conf.cmd
+++ b/src/test/cfg2cmd/simple-rbd.conf.cmd
@@ -26,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=rbd:cpool/vm-8006-disk-0:mon_host=127.0.0.42;127.0.0.21;[\:\:1]:auth_supported=none,if=none,id=drive-scsi0,discard=on,format=raw,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100,write-cache=on' \
diff --git a/src/test/cfg2cmd/simple-virtio-blk.conf.cmd b/src/test/cfg2cmd/simple-virtio-blk.conf.cmd
index 2182febc..0a7eb473 100644
--- a/src/test/cfg2cmd/simple-virtio-blk.conf.cmd
+++ b/src/test/cfg2cmd/simple-virtio-blk.conf.cmd
@@ -27,7 +27,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-drive 'file=/var/lib/vz/images/8006/vm-8006-disk-0.qcow2,if=none,id=drive-virtio0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,iothread=iothread-virtio0,bootindex=100,write-cache=on' \
-netdev 'type=tap,id=net0,ifname=tap8006i0,script=/usr/libexec/qemu-server/pve-bridge,downscript=/usr/libexec/qemu-server/pve-bridgedown,vhost=on' \
diff --git a/src/test/cfg2cmd/simple-zfs-over-iscsi.conf.cmd b/src/test/cfg2cmd/simple-zfs-over-iscsi.conf.cmd
index d9a8e5e9..a90156b0 100644
--- a/src/test/cfg2cmd/simple-zfs-over-iscsi.conf.cmd
+++ b/src/test/cfg2cmd/simple-zfs-over-iscsi.conf.cmd
@@ -26,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=iscsi://127.0.0.1/iqn.2019-10.org.test:foobar/0,if=none,id=drive-scsi0,discard=on,format=raw,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100,write-cache=on' \
diff --git a/src/test/cfg2cmd/simple1-template.conf.cmd b/src/test/cfg2cmd/simple1-template.conf.cmd
index 60531b77..c736c84a 100644
--- a/src/test/cfg2cmd/simple1-template.conf.cmd
+++ b/src/test/cfg2cmd/simple1-template.conf.cmd
@@ -24,7 +24,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/base-8006-disk-1.qcow2,if=none,id=drive-scsi0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap,readonly=on' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,write-cache=on' \
diff --git a/src/test/cfg2cmd/simple1.conf.cmd b/src/test/cfg2cmd/simple1.conf.cmd
index aa76ca62..e657aed7 100644
--- a/src/test/cfg2cmd/simple1.conf.cmd
+++ b/src/test/cfg2cmd/simple1.conf.cmd
@@ -26,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/vm-8006-disk-0.qcow2,if=none,id=drive-scsi0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100,write-cache=on' \
--
2.47.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
next prev parent reply other threads:[~2025-06-23 15:45 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-23 15:44 [pve-devel] [PATCH-SERIES qemu-server 00/15] preparation for blockdev, part two Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 01/15] fix #5985: qmp client: increase timeout for {device, netdev, object}_{add, del} commands Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 02/15] qmp client: add default timeouts for more blockdev commands Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 03/15] helpers: add missing includes Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 04/15] helpers: fix perlcritic warning about variables named $a and $b Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 05/15] move helper for iscsi initiator name to helpers module and improve name Fiona Ebner
2025-06-24 9:48 ` Fabian Grünbichler
2025-06-24 10:05 ` Fiona Ebner
2025-06-24 10:10 ` Fabian Grünbichler
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 06/15] introduce QemuImage module Fiona Ebner
2025-06-25 12:54 ` Daniel Kral
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 07/15] introduce OVMF module Fiona Ebner
2025-06-24 10:23 ` Fabian Grünbichler
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 08/15] blockdev: re-use cache setting from child node Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 09/15] blockdev: add workaround for issue #3229 Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 10/15] blockdev: add support for 'size' option Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 11/15] ovmf: add support for using blockdev Fiona Ebner
2025-06-24 8:38 ` Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 12/15] cfg2cmd: ovmf: support print_ovmf_commandline() returning machine flags Fiona Ebner
2025-06-23 15:44 ` Fiona Ebner [this message]
2025-06-23 15:44 ` [pve-devel] [RFC qemu-server 14/15] blockdev: add support for NBD paths Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [RFC qemu-server 15/15] command line: switch to blockdev starting with machine version 10.0 Fiona Ebner
2025-06-24 13:53 ` DERUMIER, Alexandre via pve-devel
2025-06-24 14:34 ` Fiona Ebner
2025-06-24 14:41 ` DERUMIER, Alexandre via pve-devel
2025-06-25 11:31 ` DERUMIER, Alexandre via pve-devel
[not found] ` <f3d01b2976480800cfa294cf888534aebadec067.camel@groupe-cyllene.com>
2025-06-25 15:42 ` Fiona Ebner
2025-06-24 9:40 ` [pve-devel] [PATCH-SERIES qemu-server 00/15] preparation for blockdev, part two DERUMIER, Alexandre via pve-devel
2025-06-24 9:59 ` Fiona Ebner
2025-06-24 11:25 ` DERUMIER, Alexandre via pve-devel
2025-06-24 11:44 ` [pve-devel] partially-applied: " Fabian Grünbichler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250623154433.449277-14-f.ebner@proxmox.com \
--to=f.ebner@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.