public inbox for pve-user@lists.proxmox.com
 help / color / mirror / Atom feed
From: "Tonči Stipičević" <tonci@suma-informatika.hr>
To: pve-user@lists.proxmox.com
Subject: Re: [PVE-User] pve-user Digest, Vol 198, Issue 6
Date: Mon, 9 Sep 2024 09:40:59 +0200	[thread overview]
Message-ID: <477dc5c4-5fc6-461c-b6b6-7731d9160c3c@suma-informatika.hr> (raw)
In-Reply-To: <mailman.95.1725643774.414.pve-user@lists.proxmox.com>

Hello,

this was just FYI ..  I was just about to upgrade NICs to 10G , but 
before I had to "rearrange" my VMs around my cluster and that is why I 
lowered BW down to 80MBs

No, I  did not measured/tested the speed, haven't gone that deep, and 
this info was from network GUI graph ... it was saturated at 1Gbs

Anyway , I remember that custom replication bandwith adjustment was 
always followed by corresponding GUI network graph presentation ... but 
like you said , maybe this lowering was to small to reflect to the 
network GUI graph

Pretty soon I'll test it again (with 10G cards)  and write back the 
results      Now, two hosts are directly connected with optical patch 
cable (peer-to-peer) .. 10G

     ...srdačan pozdrav / best regards

Tonči Stipičević, dipl. ing. elektr.
direktor / manager

SUMA Informatika d.o.o., Badalićeva 27, OIB 93926415263

Podrška / Upravljanje IT sustavima za male i srednje tvrtke
Small & Medium Business IT Support / Management

mob: 091 1234003
www.suma-informatika.hr

06. 09. 2024. u 19:29, pve-user-request@lists.proxmox.com piše:
> Send pve-user mailing list submissions to
> 	pve-user@lists.proxmox.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> or, via email, send a message with subject or body 'help' to
> 	pve-user-request@lists.proxmox.com
>
> You can reach the person managing the list at
> 	pve-user-owner@lists.proxmox.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of pve-user digest..."
>
>
> Today's Topics:
>
>     1. replication bandwith limit not respected (Ton?i Stipi?evi?)
>     2. Re: replication bandwith limit not respected (Stefan Nehlsen)
>     3. Re: replication bandwith limit not respected (Stefan Radman)
>     4. Re: replication bandwith limit not respected (Stefan Radman)
>     5. Re: 8.2-1 ISO doesn't boot via UEFI on usb (Bryan Fields)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 6 Sep 2024 15:00:57 +0200
> From: Ton?i Stipi?evi? <tonci@suma-informatika.hr>
> To: PVE User List <pve-user@pve.proxmox.com>
> Subject: [PVE-User] replication bandwith limit not respected
> Message-ID: <3ee95219-6894-4ff6-a89c-9e4a8d81b74d@suma-informatika.hr>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> Hello,
>
> I'm running latest cluster (community support)
>
> And today I've lowered replication speed down to 80MB/s? but replcation
> still uses whole NIC bandwith (1G)? ... after few host restarts? still
> the same
>
> 2024-09-06 14:37:31 using a bandwidth limit of 80000000 bytes per second
> for transferring 'data2:subvol-1007-disk-0'
>
> Does somebody else experience that too ?
>
>
> Thank you in advance
>
> BR
>
> Ton?i
>

_______________________________________________
pve-user mailing list
pve-user@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user

       reply	other threads:[~2024-09-09  7:40 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <mailman.95.1725643774.414.pve-user@lists.proxmox.com>
2024-09-09  7:40 ` Tonči Stipičević [this message]
2024-09-15 20:37   ` [PVE-User] replication bandwith limit not respected Stefan Radman via pve-user

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=477dc5c4-5fc6-461c-b6b6-7731d9160c3c@suma-informatika.hr \
    --to=tonci@suma-informatika.hr \
    --cc=pve-user@lists.proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal