From mboxrd@z Thu Jan 1 00:00:00 1970
Return-Path: <pve-devel-bounces@lists.proxmox.com>
Received: from firstgate.proxmox.com (firstgate.proxmox.com [212.224.123.68])
by lore.proxmox.com (Postfix) with ESMTPS id 463471FF163
for <inbox@lore.proxmox.com>; Thu, 7 Nov 2024 17:53:23 +0100 (CET)
Received: from firstgate.proxmox.com (localhost [127.0.0.1])
by firstgate.proxmox.com (Proxmox) with ESMTP id 18F9E34EA6;
Thu, 7 Nov 2024 17:52:27 +0100 (CET)
From: Fiona Ebner <f.ebner@proxmox.com>
To: pve-devel@lists.proxmox.com
Date: Thu, 7 Nov 2024 17:51:40 +0100
Message-Id: <20241107165146.125935-29-f.ebner@proxmox.com>
X-Mailer: git-send-email 2.39.5
In-Reply-To: <20241107165146.125935-1-f.ebner@proxmox.com>
References: <20241107165146.125935-1-f.ebner@proxmox.com>
MIME-Version: 1.0
X-SPAM-LEVEL: Spam detection results: 0
AWL -0.056 Adjusted score from AWL reputation of From: address
BAYES_00 -1.9 Bayes spam probability is 0 to 1%
DMARC_MISSING 0.1 Missing DMARC policy
KAM_DMARC_STATUS 0.01 Test Rule for DKIM or SPF Failure with Strict Alignment
SPF_HELO_NONE 0.001 SPF: HELO does not publish an SPF Record
SPF_PASS -0.001 SPF: sender matches SPF record
Subject: [pve-devel] [RFC container v3 28/34] backup: implement restore for
external providers
X-BeenThere: pve-devel@lists.proxmox.com
X-Mailman-Version: 2.1.29
Precedence: list
List-Id: Proxmox VE development discussion <pve-devel.lists.proxmox.com>
List-Unsubscribe: <https://lists.proxmox.com/cgi-bin/mailman/options/pve-devel>,
<mailto:pve-devel-request@lists.proxmox.com?subject=unsubscribe>
List-Archive: <http://lists.proxmox.com/pipermail/pve-devel/>
List-Post: <mailto:pve-devel@lists.proxmox.com>
List-Help: <mailto:pve-devel-request@lists.proxmox.com?subject=help>
List-Subscribe: <https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel>,
<mailto:pve-devel-request@lists.proxmox.com?subject=subscribe>
Reply-To: Proxmox VE development discussion <pve-devel@lists.proxmox.com>
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Errors-To: pve-devel-bounces@lists.proxmox.com
Sender: "pve-devel" <pve-devel-bounces@lists.proxmox.com>
First, the provider is asked about what restore mechanism to use.
Currently, 'directory' and 'tar' are possible, for restoring either
from a directory containing the full filesystem structure (for which
rsync is used) or a potentially compressed tar file containing the
same.
The new functions are copied and adapted from the existing ones for
PBS or tar and it might be worth to factor out the common parts.
Restore of containers as privileged are prohibited, because the
archives from an external provider are considered less trusted than
from Proxmox VE storages. If ever allowing that in the future, at
least it would be worth extracting the tar archive in a restricted
context (e.g. user namespace with ID mapped mount or seccomp).
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
---
Changes in v3:
* Use user namespace when restoring directory (and use tar instead of
rsync, because it is easier to split in privileged and unprivileged
half)
src/PVE/LXC/Create.pm | 141 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 141 insertions(+)
diff --git a/src/PVE/LXC/Create.pm b/src/PVE/LXC/Create.pm
index 8c8cb9a..8657ac1 100644
--- a/src/PVE/LXC/Create.pm
+++ b/src/PVE/LXC/Create.pm
@@ -7,6 +7,7 @@ use File::Path;
use Fcntl;
use PVE::RPCEnvironment;
+use PVE::RESTEnvironment qw(log_warn);
use PVE::Storage::PBSPlugin;
use PVE::Storage::Plugin;
use PVE::Storage;
@@ -26,6 +27,24 @@ sub restore_archive {
if ($scfg->{type} eq 'pbs') {
return restore_proxmox_backup_archive($storage_cfg, $archive, $rootdir, $conf, $no_unpack_error, $bwlimit);
}
+ if (PVE::Storage::storage_has_feature($storage_cfg, $storeid, 'backup-provider')) {
+ my $log_function = sub {
+ my ($log_level, $message) = @_;
+ my $prefix = $log_level eq 'err' ? 'ERROR' : uc($log_level);
+ print "$prefix: $message\n";
+ };
+ my $backup_provider =
+ PVE::Storage::new_backup_provider($storage_cfg, $storeid, $log_function);
+ return restore_external_archive(
+ $backup_provider,
+ $storeid,
+ $volname,
+ $rootdir,
+ $conf,
+ $no_unpack_error,
+ $bwlimit,
+ );
+ }
}
$archive = PVE::Storage::abs_filesystem_path($storage_cfg, $archive) if $archive ne '-';
@@ -127,6 +146,54 @@ sub restore_tar_archive {
die $err if $err && !$no_unpack_error;
}
+sub restore_external_archive {
+ my ($backup_provider, $storeid, $volname, $rootdir, $conf, $no_unpack_error, $bwlimit) = @_;
+
+ die "refusing to restore privileged container backup from external source\n"
+ if !$conf->{unprivileged};
+
+ my ($mechanism, $vmtype) = $backup_provider->restore_get_mechanism($volname, $storeid);
+ die "cannot restore non-LXC guest of type '$vmtype'\n" if $vmtype ne 'lxc';
+
+ my $info = $backup_provider->restore_container_init($volname, $storeid, {});
+ eval {
+ if ($mechanism eq 'tar') {
+ my $tar_path = $info->{'tar-path'}
+ or die "did not get path to tar file from backup provider\n";
+ die "not a regular file '$tar_path'" if !-f $tar_path;
+ restore_tar_archive($tar_path, $rootdir, $conf, $no_unpack_error, $bwlimit);
+ } elsif ($mechanism eq 'directory') {
+ my $directory = $info->{'archive-directory'}
+ or die "did not get path to archive directory from backup provider\n";
+ die "not a directory '$directory'" if !-d $directory;
+
+ my $create_cmd = [
+ 'tar',
+ 'cpf',
+ '-',
+ @PVE::Storage::Plugin::COMMON_TAR_FLAGS,
+ "--directory=$directory",
+ '.',
+ ];
+
+ my $extract_cmd = restore_tar_archive_command($conf, undef, $rootdir, $bwlimit);
+
+ eval { PVE::Tools::run_command([$create_cmd, $extract_cmd]); };
+ die $@ if $@ && !$no_unpack_error;
+ } else {
+ die "mechanism '$mechanism' requested by backup provider is not supported for LXCs\n";
+ }
+ };
+ my $err = $@;
+ eval { $backup_provider->restore_container_cleanup($volname, $storeid, {}); };
+ if (my $cleanup_err = $@) {
+ die $cleanup_err if !$err;
+ warn $cleanup_err;
+ }
+ die $err if $err;
+
+}
+
sub recover_config {
my ($storage_cfg, $volid, $vmid) = @_;
@@ -135,6 +202,8 @@ sub recover_config {
my $scfg = PVE::Storage::storage_check_enabled($storage_cfg, $storeid);
if ($scfg->{type} eq 'pbs') {
return recover_config_from_proxmox_backup($storage_cfg, $volid, $vmid);
+ } elsif (PVE::Storage::storage_has_feature($storage_cfg, $storeid, 'backup-provider')) {
+ return recover_config_from_external_backup($storage_cfg, $volid, $vmid);
}
}
@@ -209,6 +278,26 @@ sub recover_config_from_tar {
return wantarray ? ($conf, $mp_param) : $conf;
}
+sub recover_config_from_external_backup {
+ my ($storage_cfg, $volid, $vmid) = @_;
+
+ $vmid //= 0;
+
+ my $raw = PVE::Storage::extract_vzdump_config($storage_cfg, $volid);
+
+ my $conf = PVE::LXC::Config::parse_pct_config("/lxc/${vmid}.conf" , $raw);
+
+ delete $conf->{snapshots};
+
+ my $mp_param = {};
+ PVE::LXC::Config->foreach_volume($conf, sub {
+ my ($ms, $mountpoint) = @_;
+ $mp_param->{$ms} = $conf->{$ms};
+ });
+
+ return wantarray ? ($conf, $mp_param) : $conf;
+}
+
sub restore_configuration {
my ($vmid, $storage_cfg, $archive, $rootdir, $conf, $restricted, $unique, $skip_fw) = @_;
@@ -218,6 +307,26 @@ sub restore_configuration {
if ($scfg->{type} eq 'pbs') {
return restore_configuration_from_proxmox_backup($vmid, $storage_cfg, $archive, $rootdir, $conf, $restricted, $unique, $skip_fw);
}
+ if (PVE::Storage::storage_has_feature($storage_cfg, $storeid, 'backup-provider')) {
+ my $log_function = sub {
+ my ($log_level, $message) = @_;
+ my $prefix = $log_level eq 'err' ? 'ERROR' : uc($log_level);
+ print "$prefix: $message\n";
+ };
+ my $backup_provider =
+ PVE::Storage::new_backup_provider($storage_cfg, $storeid, $log_function);
+ return restore_configuration_from_external_backup(
+ $backup_provider,
+ $vmid,
+ $storage_cfg,
+ $archive,
+ $rootdir,
+ $conf,
+ $restricted,
+ $unique,
+ $skip_fw,
+ );
+ }
}
restore_configuration_from_etc_vzdump($vmid, $rootdir, $conf, $restricted, $unique, $skip_fw);
}
@@ -258,6 +367,38 @@ sub restore_configuration_from_proxmox_backup {
}
}
+sub restore_configuration_from_external_backup {
+ my ($backup_provider, $vmid, $storage_cfg, $archive, $rootdir, $conf, $restricted, $unique, $skip_fw) = @_;
+
+ my ($storeid, $volname) = PVE::Storage::parse_volume_id($archive);
+ my $scfg = PVE::Storage::storage_config($storage_cfg, $storeid);
+
+ my ($vtype, $name, undef, undef, undef, undef, $format) =
+ PVE::Storage::parse_volname($storage_cfg, $archive);
+
+ my $oldconf = recover_config_from_external_backup($storage_cfg, $archive, $vmid);
+
+ sanitize_and_merge_config($conf, $oldconf, $restricted, $unique);
+
+ my $firewall_config =
+ $backup_provider->restore_get_firewall_config($volname, $storeid);
+
+ if ($firewall_config) {
+ my $pve_firewall_dir = '/etc/pve/firewall';
+ my $pct_fwcfg_target = "${pve_firewall_dir}/${vmid}.fw";
+ if ($skip_fw) {
+ warn "ignoring firewall config from backup archive, lacking API permission to modify firewall.\n";
+ warn "old firewall configuration in '$pct_fwcfg_target' left in place!\n"
+ if -e $pct_fwcfg_target;
+ } else {
+ mkdir $pve_firewall_dir; # make sure the directory exists
+ PVE::Tools::file_set_contents($pct_fwcfg_target, $firewall_config);
+ }
+ }
+
+ return;
+}
+
sub sanitize_and_merge_config {
my ($conf, $oldconf, $restricted, $unique) = @_;
--
2.39.5
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel