From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from firstgate.proxmox.com (firstgate.proxmox.com [212.224.123.68]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits)) (No client certificate requested) by lists.proxmox.com (Postfix) with ESMTPS id 828E8972A6 for ; Mon, 4 Mar 2024 14:23:00 +0100 (CET) Received: from firstgate.proxmox.com (localhost [127.0.0.1]) by firstgate.proxmox.com (Proxmox) with ESMTP id 5CC8D177B4 for ; Mon, 4 Mar 2024 14:22:30 +0100 (CET) Received: from proxmox-new.maurer-it.com (proxmox-new.maurer-it.com [94.136.29.106]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits)) (No client certificate requested) by firstgate.proxmox.com (Proxmox) with ESMTPS for ; Mon, 4 Mar 2024 14:22:28 +0100 (CET) Received: from proxmox-new.maurer-it.com (localhost.localdomain [127.0.0.1]) by proxmox-new.maurer-it.com (Proxmox) with ESMTP id 7F11547D95 for ; Mon, 4 Mar 2024 14:22:28 +0100 (CET) From: Christoph Heiss To: pve-devel@lists.proxmox.com Date: Mon, 4 Mar 2024 14:22:13 +0100 Message-ID: <20240304132221.901327-7-c.heiss@proxmox.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240304132221.901327-1-c.heiss@proxmox.com> References: <20240304132221.901327-1-c.heiss@proxmox.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-SPAM-LEVEL: Spam detection results: 0 AWL 0.005 Adjusted score from AWL reputation of From: address BAYES_00 -1.9 Bayes spam probability is 0 to 1% DMARC_MISSING 0.1 Missing DMARC policy KAM_DMARC_STATUS 0.01 Test Rule for DKIM or SPF Failure with Strict Alignment SPF_HELO_NONE 0.001 SPF: HELO does not publish an SPF Record SPF_PASS -0.001 SPF: sender matches SPF record T_SCC_BODY_TEXT_LINE -0.01 - Subject: [pve-devel] [PATCH docs 6/9] installation: iso: improve & align wording with pmg-docs X-BeenThere: pve-devel@lists.proxmox.com X-Mailman-Version: 2.1.29 Precedence: list List-Id: Proxmox VE development discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 04 Mar 2024 13:23:00 -0000 New paragraphs were taken from pmg-docs and adapted. Most changes here are the result of basically "diffing" both documentations, choosing the better prased/sounding sections. Some wording were slightly changed as necessary to further improve them. The equivalent changes will be done for pmg-docs too, to ensure they are really the same in the end. Signed-off-by: Christoph Heiss --- pve-installation.adoc | 123 ++++++++++++++++++++++++++++-------------- 1 file changed, 82 insertions(+), 41 deletions(-) diff --git a/pve-installation.adoc b/pve-installation.adoc index 6b44fc0..e384f49 100644 --- a/pve-installation.adoc +++ b/pve-installation.adoc @@ -43,7 +43,7 @@ The installer ISO image includes the following: * Complete operating system (Debian Linux, 64-bit) * The {pve} installer, which partitions the local disk(s) with ext4, XFS, - BTRFS (technology preview), or ZFS and installs the operating system. + BTRFS (technology preview), or ZFS and installs the operating system * {pve} Linux kernel with KVM and LXC support @@ -52,9 +52,9 @@ The installer ISO image includes the following: * Web-based management interface -NOTE: All existing data on the for installation selected drives will be removed -during the installation process. The installer does not add boot menu entries -for other operating systems. +NOTE: All existing data on the selected drives will be removed during the +installation process. The installer does not add boot menu entries for other +operating systems. Please insert the xref:installation_prepare_media[prepared installation media] (for example, USB flash drive or CD-ROM) and boot from it. @@ -65,8 +65,8 @@ when booting an installer prior to {pve} version 8.1. [thumbnail="screenshot/pve-grub-menu.png"] -After choosing the correct entry (e.g. Boot from USB) the {pve} menu will be -displayed and one of the following options can be selected: +After choosing the correct entry (for example, 'Boot from USB') the {pve} menu +will be displayed, and one of the following options can be selected: Install {pve} (Graphical):: @@ -78,7 +78,7 @@ from the respective button. For example, `ALT + N` to press a `Next` button. Install {pve} (Terminal UI):: -Starts the console-mode installation wizard. It provides the same overall +Starts the terminal-mode installation wizard. It provides the same overall installation experience as the graphical installer, but has generally better compatibility with very old and very new hardware. @@ -123,39 +123,46 @@ Runs `memtest86+`. This is useful to check if the memory is functional and free of errors. Secure Boot must be turned off in the UEFI firmware setup utility to run this option. +You normally select *Install {pve} (Graphical)* to start the installation. + [thumbnail="screenshot/pve-select-target-disk.png"] -After selecting *Install {pve}* and accepting the EULA, the prompt to select the -target hard disk(s) will appear. The `Options` button opens the dialog to select -the target file system. +The first step is to read our EULA (End User License Agreement). Following this, +you can select the target hard disk(s) for the installation. + +CAUTION: By default, the whole server is used and all existing data is removed. +Make sure there is no important data on the server before proceeding with the +installation. -The default file system is `ext4`. The Logical Volume Manager (LVM) is used when -`ext4` or `xfs` is selected. Additional options to restrict LVM space -can also be set (see <>). +The `Options` button lets you select the target file system, which +defaults to `ext4`. The installer uses LVM if you select +`ext4` or `xfs` as a file system, and offers additional options to +restrict LVM space (see xref:advanced_lvm_options[below]). -{pve} can be installed on ZFS. As ZFS offers several software RAID levels, this -is an option for systems that don't have a hardware RAID controller. The target -disks must be selected in the `Options` dialog. More ZFS specific settings can -be changed under `Advanced Options` (see <>). +{pve} can also be installed on ZFS. As ZFS offers several software RAID levels, +this is an option for systems that don't have a hardware RAID controller. The +target disks must be selected in the `Options` dialog. More ZFS specific +settings can be changed under xref:advanced_zfs_options[`Advanced Options`]. WARNING: ZFS on top of any hardware RAID is not supported and can result in data loss. [thumbnail="screenshot/pve-select-location.png", float="left"] -The next page asks for basic configuration options like the location, the time -zone, and keyboard layout. The location is used to select a download server -close by to speed up updates. The installer usually auto-detects these settings. -They only need to be changed in the rare case that auto detection fails or a -different keyboard layout should be used. +The next page asks for basic configuration options like your location, time +zone, and keyboard layout. The location is used to select a nearby download +server, in order to increase the speed of updates. The installer is usually able +to auto-detect these settings, so you only need to change them in rare +situations when auto-detection fails, or when you want to use a keyboard layout +not commonly used in your country. [thumbnail="screenshot/pve-set-password.png"] -Next the password of the superuser (root) and an email address needs to be +Next the password of the superuser (`root`) and an email address needs to be specified. The password must consist of at least 5 characters. It's highly recommended to use a stronger password. Some guidelines are: -- Use a minimum password length of 12 to 14 characters. +- Use a minimum password length of at least 12 characters. - Include lowercase and uppercase alphabetic characters, numbers, and symbols. @@ -169,35 +176,69 @@ For example: - Information about available package updates. -- Error messages from periodic CRON jobs. +- Error messages from periodic 'cron' jobs. [thumbnail="screenshot/pve-setup-network.png"] -The last step is the network configuration. Network interfaces that are UP show -a filled circle in front of their name in the drop down menu. Please note that -during installation you can either use an IPv4 or IPv6 address, but not both. To -configure a dual stack node, add additional IP addresses after the installation. +All those notification mails will be sent to the specified email address. + +The last step is the network configuration. Network interfaces that are 'UP' +show a filled circle in front of their name in the drop down menu. Please note +that during installation you can either specify an IPv4 or IPv6 address, but not +both. To configure a dual stack node, add additional IP addresses after the +installation. [thumbnail="screenshot/pve-installation.png", float="left"] -The next step shows a summary of the previously selected options. Re-check every -setting and use the `Previous` button if a setting needs to be changed. To -accept, press `Install`. The installation starts to format disks and copies -packages to the target. Please wait until this step has finished; then remove -the installation medium and restart your system. +The next step shows a summary of the previously selected options. Please +re-check every setting and use the `Previous` button if a setting needs to be +changed. + +After clicking `Install`, the installer will begin to format the disks and copy +packages to the target disk(s). Please wait until this step has finished; then +remove the installation medium and restart your system. [thumbnail="screenshot/pve-install-summary.png"] +Copying the packages usually takes several minutes, mostly depending on the +speed of the installation medium and the target disk performance. + +When copying and setting up the packages has finished, you can reboot the +server. This will be done automatically after a few seconds by default. + +.Installation Failure + If the installation failed, check out specific errors on the second TTY -(`CTRL + ALT + F2') and ensure that the systems meets the -xref:install_minimal_requirements[minimum requirements]. If the installation -is still not working, look at the xref:getting_help[how to get help chapter]. +('CTRL + ALT + F2') and ensure that the systems meets the +xref:install_minimal_requirements[minimum requirements]. + +If the installation is still not working, look at the +xref:getting_help[how to get help chapter]. + + +Accessing the Management Interface Post-Installation +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +[thumbnail="screenshot/gui-login-window.png"] + +After a succesful installation and reboot of the system you can use the {pve} +web interface for further configuration. + +. Point your browser to the IP address given during the installation and port + 8006, for example: https://youripaddress:8006 + +. Log in using the `root` (realm 'PAM') username and the password chosen during +installation. + +. Upload your subscription key to gain access to the Enterprise repository. + Otherwise, you will need to set up one of the public, less tested package + repositories to get updates for security fixes, bug fixes, and new features. + +. Check the IP configuration and hostname. -Further configuration is done via the Proxmox web interface. Point your browser -to the IP address given during installation (https://youripaddress:8006). +. Check the timezone. -NOTE: Default login is "root" (realm 'PAM') and the root password was defined -during the installation process. +. Check your xref:chapter_pve_firewall[Firewall settings]. [[advanced_lvm_options]] Advanced LVM Configuration Options -- 2.43.0