From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from firstgate.proxmox.com (firstgate.proxmox.com [212.224.123.68]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits)) (No client certificate requested) by lists.proxmox.com (Postfix) with ESMTPS id 84F119F032 for ; Fri, 3 Nov 2023 14:55:57 +0100 (CET) Received: from firstgate.proxmox.com (localhost [127.0.0.1]) by firstgate.proxmox.com (Proxmox) with ESMTP id 677D11EBD8 for ; Fri, 3 Nov 2023 14:55:27 +0100 (CET) Received: from proxmox-new.maurer-it.com (proxmox-new.maurer-it.com [94.136.29.106]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits)) (No client certificate requested) by firstgate.proxmox.com (Proxmox) with ESMTPS for ; Fri, 3 Nov 2023 14:55:23 +0100 (CET) Received: from proxmox-new.maurer-it.com (localhost.localdomain [127.0.0.1]) by proxmox-new.maurer-it.com (Proxmox) with ESMTP id 2A41D442DB for ; Fri, 3 Nov 2023 14:55:23 +0100 (CET) From: Alexander Zeidler To: pmg-devel@lists.proxmox.com Date: Fri, 3 Nov 2023 14:54:56 +0100 Message-Id: <20231103135456.120601-2-a.zeidler@proxmox.com> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20231103135456.120601-1-a.zeidler@proxmox.com> References: <20231103135456.120601-1-a.zeidler@proxmox.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-SPAM-LEVEL: Spam detection results: 0 AWL 0.034 Adjusted score from AWL reputation of From: address BAYES_00 -1.9 Bayes spam probability is 0 to 1% DMARC_MISSING 0.1 Missing DMARC policy KAM_DMARC_STATUS 0.01 Test Rule for DKIM or SPF Failure with Strict Alignment SPF_HELO_NONE 0.001 SPF: HELO does not publish an SPF Record SPF_PASS -0.001 SPF: sender matches SPF record T_SCC_BODY_TEXT_LINE -0.01 - URIBL_BLOCKED 0.001 ADMINISTRATOR NOTICE: The query to URIBL was blocked. See http://wiki.apache.org/spamassassin/DnsBlocklists#dnsbl-block for more information. [broadcom.com, fwupd.org, nvidia.com] Subject: [pmg-devel] [PATCH pmg-docs 2/2] installation: add section 'Firmware Updates' & repository X-BeenThere: pmg-devel@lists.proxmox.com X-Mailman-Version: 2.1.29 Precedence: list List-Id: Proxmox Mail Gateway development discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Nov 2023 13:55:57 -0000 Firmware updates are important, their existence should not be checked only when there are already noticeable problems. Signed-off-by: Alexander Zeidler --- Information provided with this patch is largely identical to that in the "Firmware Updates" chapter from PVE. A few minor changes have been made to make it suitable for PMG. Since firmware/microcode has little to do with PMG's configuration, but more with "Installation", I have added a chapter 3.6 after 3.5 "Package Repositories" pmg-administration.adoc | 1 + pmg-installation.adoc | 216 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 217 insertions(+) diff --git a/pmg-administration.adoc b/pmg-administration.adoc index 05f4589..760f88a 100644 --- a/pmg-administration.adoc +++ b/pmg-administration.adoc @@ -42,6 +42,7 @@ systemctl status postfix ----- +[[pmg_updates]] Updates ~~~~~~~ diff --git a/pmg-installation.adoc b/pmg-installation.adoc index 1a0bb59..ca6e759 100644 --- a/pmg-installation.adoc +++ b/pmg-installation.adoc @@ -456,3 +456,219 @@ Following this, you can install the required packages with: apt update apt install libclamunrar p7zip-rar ---- + + +[[pmg_debian_firmware_repo]] +Debian Firmware Repository +~~~~~~~~~~~~~~~~~~~~~~~~~ +Starting with Debian Bookworm ({pmg} 8) non-free firmware (as defined by +https://www.debian.org/social_contract#guidelines[DFSG]) has been moved to the +newly created Debian repository component `non-free-firmware`. + +Enable this repository if you want to set up +xref:pmg_firmware_cpu[Early OS Microcode Updates] or need additional +xref:pmg_firmware_runtime_files[Runtime Firmware Files] not already included in +the pre-installed package `pve-firmware`. + +To be able to install packages from this component, run +`editor /etc/apt/sources.list`, append `non-free-firmware` to the end of each +`.debian.org` repository line and run `apt update`. + + +[[pmg_firmware_updates]] +Firmware Updates +---------------- +Firmware updates from this chapter should be applied when running {pmg} or +Debian on a bare-metal server. Whether configuring firmware updates is +appropriate within a virtualized environment, e.g. when using device +pass-through, depends strongly on your setup and is therefore out of scope. + +In addition to regular software updates, firmware updates are also important for +reliable and secure operation. + +When obtaining and applying firmware updates, a combination of available options +is recommended to get them as early as possible or at all. + +The term firmware is usually divided linguistically into microcode (for CPUs) +and firmware (for other devices). + + +[[pmg_firmware_persistent]] +Persistent Firmware +~~~~~~~~~~~~~~~~~~~ +This section is suitable for all devices. Updated microcode, which is usually +included in a BIOS/UEFI update, is stored on the motherboard, whereas other +firmware is stored on the respective device. This persistent method is +especially important for the CPU, as it enables the earliest possible regular +loading of the updated microcode at boot time. + +CAUTION: With some updates, such as for BIOS/UEFI or storage controller, the +device configuration could be reset. Please follow the vendor's instructions +carefully and back up the current configuration. + +Please check with your vendor which update methods are available. + +* Convenient update methods for servers can include Dell's Lifecycle Manager or +Service Packs from HPE. + +* Sometimes there are Linux utilities available as well. Examples are +https://network.nvidia.com/support/firmware/mlxup-mft/['mlxup'] for NVIDIA +ConnectX or +https://techdocs.broadcom.com/us/en/storage-and-ethernet-connectivity/ethernet-nic-controllers/bcm957xxx/adapters/software-installation/updating-the-firmware/manually-updating-the-adapter-firmware-on-linuxesx.html['bnxtnvm'/'niccli'] +for Broadcom network cards. + +* https://fwupd.org[LVFS] could also be an option if there is a cooperation with +a https://fwupd.org/lvfs/vendors/[vendor] and +https://fwupd.org/lvfs/devices/[supported hardware] in use. The technical +requirement for this is that the system was manufactured after 2014, is booted +via UEFI and the easiest way is to mount the EFI partition from which you boot +(`mount /dev/disk/by-partuuid/ /boot/efi`) before installing +'fwupd'. + +TIP: If the update instructions require a host reboot, please do not forget +about it. + + +[[pmg_firmware_runtime_files]] +Runtime Firmware Files +~~~~~~~~~~~~~~~~~~~~~~ +This method stores firmware on the {pmg} operating system and will pass it to a +device if its xref:pmg_firmware_persistent[persisted firmware] is less recent. +It is supported by devices such as network and graphics cards, but not by those +that rely on persisted firmware such as the motherboard and hard disks. + +In {pmg} the package `pve-firmware` is already installed by default. Therefore, +with the normal xref:pmg_updates[system updates (APT)], included firmware of +common hardware is automatically kept up to date. + +An additional xref:pmg_debian_firmware_repo[Debian Firmware Repository] exists, +but is not configured by default. + +If you try to install an additional firmware package but it conflicts, APT will +abort the installation. Perhaps the particular firmware can be obtained in +another way. + + +[[pmg_firmware_cpu]] +CPU Microcode Updates +~~~~~~~~~~~~~~~~~~~~~ +Microcode updates are intended to fix found security vulnerabilities and other +serious CPU bugs. While the CPU performance can be affected, a patched microcode +is usually still more performant than an unpatched microcode where the kernel +itself has to do mitigations. Depending on the CPU type, it is possible that +performance results of the flawed factory state can no longer be achieved +without knowingly running the CPU in an unsafe state. + +To get an overview of present CPU vulnerabilities and their mitigations, run +`lscpu`. Current real-world known vulnerabilities can only show up if the {pmg} +host is xref:pmg_updates[up to date], its version not +xref:faq-support-table[end of life], and has at least been rebooted since the +last kernel update. + +Besides the recommended microcode update via +xref:pmg_firmware_persistent[persistent] BIOS/UEFI updates, there is also an +independent method via *Early OS Microcode Updates*. It is convenient to use and +also quite helpful when the motherboard vendor no longer provides BIOS/UEFI +updates. Regardless of the method in use, a reboot is always needed to apply a +microcode update. + + +Set up Early OS Microcode Updates +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +To set up microcode updates that are applied early on boot by the Linux kernel, +you need to: + +. Enable the xref:pmg_debian_firmware_repo[Debian Firmware Repository] +. Get the latest available packages: `apt update` (or use the web interface, + under Administration -> Updates) +. Install the CPU-vendor specific microcode package: + - For Intel CPUs: `apt install intel-microcode` + - For AMD CPUs: `apt install amd64-microcode` +. Reboot the {pmg} host + +Any future microcode update will also require a reboot to be loaded. + + +Microcode Version +^^^^^^^^^^^^^^^^^ +To get the current running microcode revision for comparison or debugging +purposes: + +---- +# grep microcode /proc/cpuinfo | uniq +microcode : 0xf0 +---- + +A microcode package has updates for many different CPUs. But updates +specifically for your CPU might not come often. So, just looking at the date on +the package won't tell you when the company actually released an update for your +specific CPU. + +If you've installed a new microcode package and rebooted your {pmg} host, and +this new microcode is newer than both, the version baked into the CPU and the +one from the motherboard's firmware, you'll see a message in the system log +saying "microcode updated early". + +---- +# dmesg | grep microcode +[ 0.000000] microcode: microcode updated early to revision 0xf0, date = 2021-11-12 +[ 0.896580] microcode: Microcode Update Driver: v2.2. +---- + + +[[pmg_firmware_troubleshooting]] +Troubleshooting +^^^^^^^^^^^^^^^ +For debugging purposes, the set up Early OS Microcode Update applied regularly +at system boot can be temporarily disabled as follows: + +. Reboot the host to get to the GRUB menu (hold `SHIFT` if it is hidden) +. At the desired {pmg} boot entry press `E` +. Go to the line which starts with `linux` and append separated by a space +*`dis_ucode_ldr`* +. Press `CTRL-X` to boot this time without an Early OS Microcode Update + +If a problem related to a recent microcode update is suspected, a package +downgrade should be considered instead of package removal +(`apt purge `). Otherwise, a too old +xref:pmg_firmware_persistent[persisted] microcode might be loaded, even +though a more recent one would run without problems. + +A downgrade is possible if an earlier microcode package version is +available in the Debian repository, as shown in this example: + +---- +# apt list -a intel-microcode +Listing... Done +intel-microcode/stable-security,now 3.20230808.1~deb12u1 amd64 [installed] +intel-microcode/stable 3.20230512.1 amd64 +---- +---- +# apt install intel-microcode=3.202305* +... +Selected version '3.20230512.1' (Debian:12.1/stable [amd64]) for 'intel-microcode' +... +dpkg: warning: downgrading intel-microcode from 3.20230808.1~deb12u1 to 3.20230512.1 +... +intel-microcode: microcode will be updated at next boot +... +---- + +To apply an older microcode potentially included in the microcode package for +your CPU type, reboot now. + +[TIP] +==== +It makes sense to hold the downgraded package for a while and try more recent +versions again at a later time. Even if the package version is the same in the +future, system updates may have fixed the experienced problem in the meantime. +---- +# apt-mark hold intel-microcode +intel-microcode set on hold. +---- +---- +# apt-mark unhold intel-microcode +# apt update +# apt upgrade +---- +==== -- 2.39.2