[PATCH proxmox-backup v3] fix #7187: report: add ethtool output for physical interfaces

[PATCH proxmox-backup v3] fix #7187: report: add ethtool output for physical interfaces

[Erik Fastermann]

Adding ethtool output to the report provides visibility into actual and
supported NIC link speeds, making it much easier to diagnose network
performance issues, negotiation failures, and configuration mismatches.
It also reduces support back-and-forth.

Signed-off-by: Erik Fastermann <e.fastermann@proxmox.com>
---

 NOTE: A similar patch was submitted for all products:
 pmg, pve, pbs, pdm.

 changes since v2:
 * added new function dynamic_commands
 * updated generate_report to include the dynamic_commands
   NOTE: I did not change the signature of get_command_output, as the suggested
   fix does not work in this case, because we later join the args for the
   output. This is why solutions like &[impl AsRef<OsStr>] also don't work.
   Mapping the Vec<String> to Vec<&str> seamed like the simplest change, but I'm
   open to other suggestions.

 src/server/report.rs | 35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)

diff --git a/src/server/report.rs b/src/server/report.rs
index e4c761cdb..297718d2e 100644
--- a/src/server/report.rs
+++ b/src/server/report.rs
@@ -2,6 +2,8 @@ use std::fmt::Write;
 use std::path::Path;
 use std::process::Command;
 
+use proxmox_network_api::NetworkInterfaceType;
+
 fn get_top_processes() -> String {
     let (exe, args) = ("top", vec!["-b", "-c", "-w512", "-n", "1", "-o", "TIME"]);
     let output = Command::new(exe).args(&args).output();
@@ -93,6 +95,25 @@ fn commands() -> Vec<(&'static str, Vec<&'static str>)> {
     ]
 }
 
+fn dynamic_commands() -> Vec<(&'static str, Vec<String>)> {
+    let mut commands = Vec::new();
+
+    match proxmox_network_api::config() {
+        Ok((config, _)) => {
+            for (name, iface) in config.interfaces {
+                if iface.interface_type == NetworkInterfaceType::Eth {
+                    commands.push(("ethtool", vec![name]));
+                }
+            }
+        }
+        Err(err) => {
+            eprintln!("failed to query network interfaces: {err}");
+        }
+    }
+
+    commands
+}
+
 // (description, function())
 type FunctionMapping = (&'static str, fn() -> String);
 
@@ -206,9 +227,17 @@ pub fn generate_report() -> String {
         .collect::<Vec<String>>()
         .join("\n\n");
 
-    let command_outputs = commands()
-        .iter()
-        .map(|(command, args)| get_command_output(command, args))
+    let static_command_outputs = commands()
+        .into_iter()
+        .map(|(command, args)| get_command_output(command, &args));
+
+    let dynamic_command_outputs = dynamic_commands().into_iter().map(|(command, args)| {
+        let args = args.iter().map(String::as_str).collect();
+        get_command_output(command, &args)
+    });
+
+    let command_outputs = static_command_outputs
+        .chain(dynamic_command_outputs)
         .collect::<Vec<String>>()
         .join("\n\n");
 
-- 
2.47.3

Re: [PATCH proxmox-backup v3] fix #7187: report: add ethtool output for physical interfaces

[Erik Fastermann]

Gentle ping. This patch still cleanly applies on the current master.


On 5/15/26 10:39 AM, Erik Fastermann wrote:
> Adding ethtool output to the report provides visibility into actual and
> supported NIC link speeds, making it much easier to diagnose network
> performance issues, negotiation failures, and configuration mismatches.
> It also reduces support back-and-forth.
> 
> Signed-off-by: Erik Fastermann <e.fastermann@proxmox.com>
> ---
> 
>   NOTE: A similar patch was submitted for all products:
>   pmg, pve, pbs, pdm.
> 
>   changes since v2:
>   * added new function dynamic_commands
>   * updated generate_report to include the dynamic_commands
>     NOTE: I did not change the signature of get_command_output, as the suggested
>     fix does not work in this case, because we later join the args for the
>     output. This is why solutions like &[impl AsRef<OsStr>] also don't work.
>     Mapping the Vec<String> to Vec<&str> seamed like the simplest change, but I'm
>     open to other suggestions.
> 
>   src/server/report.rs | 35 ++++++++++++++++++++++++++++++++---
>   1 file changed, 32 insertions(+), 3 deletions(-)
> 
> diff --git a/src/server/report.rs b/src/server/report.rs
> index e4c761cdb..297718d2e 100644
> --- a/src/server/report.rs
> +++ b/src/server/report.rs
> @@ -2,6 +2,8 @@ use std::fmt::Write;
>   use std::path::Path;
>   use std::process::Command;
>   
> +use proxmox_network_api::NetworkInterfaceType;
> +
>   fn get_top_processes() -> String {
>       let (exe, args) = ("top", vec!["-b", "-c", "-w512", "-n", "1", "-o", "TIME"]);
>       let output = Command::new(exe).args(&args).output();
> @@ -93,6 +95,25 @@ fn commands() -> Vec<(&'static str, Vec<&'static str>)> {
>       ]
>   }
>   
> +fn dynamic_commands() -> Vec<(&'static str, Vec<String>)> {
> +    let mut commands = Vec::new();
> +
> +    match proxmox_network_api::config() {
> +        Ok((config, _)) => {
> +            for (name, iface) in config.interfaces {
> +                if iface.interface_type == NetworkInterfaceType::Eth {
> +                    commands.push(("ethtool", vec![name]));
> +                }
> +            }
> +        }
> +        Err(err) => {
> +            eprintln!("failed to query network interfaces: {err}");
> +        }
> +    }
> +
> +    commands
> +}
> +
>   // (description, function())
>   type FunctionMapping = (&'static str, fn() -> String);
>   
> @@ -206,9 +227,17 @@ pub fn generate_report() -> String {
>           .collect::<Vec<String>>()
>           .join("\n\n");
>   
> -    let command_outputs = commands()
> -        .iter()
> -        .map(|(command, args)| get_command_output(command, args))
> +    let static_command_outputs = commands()
> +        .into_iter()
> +        .map(|(command, args)| get_command_output(command, &args));
> +
> +    let dynamic_command_outputs = dynamic_commands().into_iter().map(|(command, args)| {
> +        let args = args.iter().map(String::as_str).collect();
> +        get_command_output(command, &args)
> +    });
> +
> +    let command_outputs = static_command_outputs
> +        .chain(dynamic_command_outputs)
>           .collect::<Vec<String>>()
>           .join("\n\n");
>