all lists on lists.proxmox.com
 help / color / mirror / Atom feed
From: Thomas Lamprecht <t.lamprecht@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH v7 storage 07/43] multipath: add a library around multipathd
Date: Wed, 18 Nov 2026 21:25:50 +0100	[thread overview]
Message-ID: <20261118202646.3017286-8-t.lamprecht@proxmox.com> (raw)
In-Reply-To: <20261118202646.3017286-1-t.lamprecht@proxmox.com>

The SAN LUN inventory, the per-node status and the iSCSI plugin need
the multipath maps of a node and the state of their paths. Add a
module that reads the maps and their member devices from sysfs and
the path states from multipathd, with a timeout for the queries. Maps
are identified by the WWID of their LUN, which is the same on all
nodes. The iSCSI plugin uses the module to recognize a map already.

multipath-tools is only recommended, as storages that do not use
multipath work without it.

Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
---
 debian/control                       |   3 +-
 src/PVE/Makefile                     |   1 +
 src/PVE/Multipath.pm                 | 136 +++++++++++++++++++++++++++
 src/PVE/Storage/ISCSIPlugin.pm       |   3 +-
 src/test/Makefile                    |   5 +-
 src/test/multipath-three-states.json |  52 ++++++++++
 src/test/run_multipath_tests.pl      | 106 +++++++++++++++++++++
 7 files changed, 303 insertions(+), 3 deletions(-)
 create mode 100644 src/PVE/Multipath.pm
 create mode 100644 src/test/multipath-three-states.json
 create mode 100755 src/test/run_multipath_tests.pl

diff --git a/debian/control b/debian/control
index 4abf489c..d10dfb23 100644
--- a/debian/control
+++ b/debian/control
@@ -54,7 +54,8 @@ Depends: bzip2,
          zstd,
          ${misc:Depends},
          ${perl:Depends},
-Recommends: pve-esxi-import-tools (>= 0.6.0),
+Recommends: multipath-tools,
+            pve-esxi-import-tools (>= 0.6.0),
             skopeo,
             zfsutils-linux (>= 2.4.1-pve2),
             zfs-zed,
diff --git a/src/PVE/Makefile b/src/PVE/Makefile
index bd2ddfb9..db1c340d 100644
--- a/src/PVE/Makefile
+++ b/src/PVE/Makefile
@@ -5,6 +5,7 @@ install:
 	install -D -m 0644 Storage.pm ${DESTDIR}${PERLDIR}/PVE/Storage.pm
 	install -D -m 0644 Diskmanage.pm ${DESTDIR}${PERLDIR}/PVE/Diskmanage.pm
 	install -D -m 0644 ISCSI/Topology.pm ${DESTDIR}${PERLDIR}/PVE/ISCSI/Topology.pm
+	install -D -m 0644 Multipath.pm ${DESTDIR}${PERLDIR}/PVE/Multipath.pm
 	install -D -m 0644 CephConfig.pm ${DESTDIR}${PERLDIR}/PVE/CephConfig.pm
 	install -D -m 0644 GuestImport.pm ${DESTDIR}${PERLDIR}/PVE/GuestImport.pm
 	make -C Storage install
diff --git a/src/PVE/Multipath.pm b/src/PVE/Multipath.pm
new file mode 100644
index 00000000..84c4901e
--- /dev/null
+++ b/src/PVE/Multipath.pm
@@ -0,0 +1,136 @@
+package PVE::Multipath;
+
+use v5.36;
+
+use Encode qw(decode encode);
+use JSON qw(decode_json);
+
+use PVE::Tools qw(run_command file_read_firstline dir_glob_foreach);
+
+use PVE::Diskmanage;
+
+my $MULTIPATH = '/sbin/multipath';
+my $MULTIPATHD = '/sbin/multipathd';
+
+sub parse_dm_uuid($uuid) {
+    my ($part, $wwid) = ($uuid // '') =~ /^(?:part([1-9][0-9]*)-)?mpath-(\S+)$/;
+    return undef if !defined($wwid);
+    return { wwid => $wwid, defined($part) ? (partition => int($part)) : () };
+}
+
+sub map_info() {
+    my $maps = {};
+    dir_glob_foreach(
+        '/sys/block',
+        'dm-\\d+',
+        sub($dev, @) {
+            my $info = parse_dm_uuid(file_read_firstline("/sys/block/$dev/dm/uuid"));
+            return if !$info || $info->{partition};
+            my $name = file_read_firstline("/sys/block/$dev/dm/name") // return;
+            my @slaves;
+            dir_glob_foreach(
+                "/sys/block/$dev/slaves",
+                '[^.].*',
+                sub($slave, @) { push @slaves, $slave },
+            );
+            $maps->{$dev} = { %$info, name => $name, slaves => [sort @slaves] };
+        },
+    );
+    return $maps;
+}
+
+sub member_map($maps) {
+    my $members = {};
+    for my $dev (sort keys %$maps) {
+        $members->{$_} = $dev for $maps->{$dev}->{slaves}->@*;
+    }
+    return $members;
+}
+
+sub is_supported() { return -x $MULTIPATH && -x $MULTIPATHD ? 1 : 0 }
+sub assert_supported() { die "multipath-tools is not installed\n" if !is_supported() }
+
+sub is_running() {
+    return 0 if !is_supported();
+    my $running = 0;
+    eval {
+        run_command(
+            [$MULTIPATHD, 'show', 'daemon'],
+            timeout => 10,
+            outfunc => sub($line) { $running = 1 if $line =~ /^pid \d+ \S+/ },
+            errfunc => sub($line) { },
+        );
+    };
+    return $running;
+}
+
+my sub string_value($value) {
+    return undef if !defined($value) || $value eq '' || $value eq '[undef]';
+    die "invalid string in multipathd output\n" if ref($value);
+    return $value;
+}
+
+sub path_is_usable($path) {
+    return ($path->{'dm-state'} // '') eq 'active'
+        && (!defined($path->{'check-state'}) || $path->{'check-state'} =~ /^(?:ready|ghost)$/);
+}
+
+sub derive_health($active, $total, $expected = undef) {
+    return 'failed' if !$total || !$active;
+    return 'degraded' if $active < $total || $total < ($expected // 0);
+    return 'optimal';
+}
+
+sub parse_maps_json($json) {
+    $json = decode('UTF-8', $json) if !utf8::is_utf8($json);
+    my $data = decode_json(encode('UTF-8', $json));
+    die "invalid multipathd maps output\n"
+        if ref($data) ne 'HASH' || ref($data->{maps} // []) ne 'ARRAY';
+    my @maps;
+    for my $raw (($data->{maps} // [])->@*) {
+        die "invalid multipathd map\n" if ref($raw) ne 'HASH';
+        my $map = { paths => [], 'paths-total' => 0, 'paths-active' => 0 };
+        for my $pair ([uuid => 'wwid'], [name => 'name'], [sysfs => 'sysfs']) {
+            my $value = string_value($raw->{ $pair->[0] });
+            $map->{ $pair->[1] } = $value if defined($value);
+        }
+        for my $group (($raw->{path_groups} // [])->@*) {
+            for my $rawpath (($group->{paths} // [])->@*) {
+                my $path = { dev => string_value($rawpath->{dev}) // '' };
+                for my $pair (
+                    [dm_st => 'dm-state'],
+                    [chk_st => 'check-state'],
+                    [host_wwpn => 'host-wwpn'],
+                    [target_wwpn => 'target-wwpn'],
+                ) {
+                    my $value = string_value($rawpath->{ $pair->[0] });
+                    next if !defined($value) || ($pair->[0] =~ /wwpn$/ && $value eq '[unknown]');
+                    $path->{ $pair->[1] } = $value;
+                }
+                push $map->{paths}->@*, $path;
+                $map->{'paths-total'}++;
+                $map->{'paths-active'}++ if path_is_usable($path);
+            }
+        }
+        push @maps, $map;
+    }
+    return \@maps;
+}
+
+sub get_maps() {
+    assert_supported();
+    my $json = '';
+    run_command(
+        [$MULTIPATHD, 'show', 'maps', 'json'],
+        timeout => 10,
+        outfunc => sub($line) { $json .= "$line\n" },
+    );
+    my $maps = parse_maps_json($json);
+    for my $map (@$maps) {
+        $map->{size} = PVE::Diskmanage::get_sysdir_size("/sys/block/$map->{sysfs}")
+            if $map->{sysfs};
+    }
+    return $maps;
+}
+
+1;
diff --git a/src/PVE/Storage/ISCSIPlugin.pm b/src/PVE/Storage/ISCSIPlugin.pm
index cec58afb..1e1ee4cb 100644
--- a/src/PVE/Storage/ISCSIPlugin.pm
+++ b/src/PVE/Storage/ISCSIPlugin.pm
@@ -10,6 +10,7 @@ use IO::File;
 
 use PVE::ISCSI::Topology;
 use PVE::JSONSchema qw(get_standard_option);
+use PVE::Multipath;
 use PVE::Storage::Plugin;
 use PVE::Tools
     qw(run_command file_read_firstline trim dir_glob_regex dir_glob_foreach $IPV4RE $IPV6RE);
@@ -588,7 +589,7 @@ $resolve_virtual_devices = sub {
         my $uuid = file_read_firstline("/sys/$dev/dm/uuid") // '';
         my ($name) = $dev =~ m!([^/]+)$!;
         die "'$name' is neither a multipath map nor a partition of one\n"
-            if $uuid !~ m/^(?:part\d+-)?mpath-\S+$/;
+            if !PVE::Multipath::parse_dm_uuid($uuid);
 
         dir_glob_foreach(
             "/sys/$dev/slaves",
diff --git a/src/test/Makefile b/src/test/Makefile
index b2676762..3f388a07 100644
--- a/src/test/Makefile
+++ b/src/test/Makefile
@@ -1,6 +1,6 @@
 all: test
 
-test: test_iscsi test_zfspoolplugin test_lvmplugin test_lvm_create test_lvm_lock_retry test_lvm_base_volume test_lvm_hints test_disklist test_bwlimit test_plugin test_ovf test_volume_access test_remote_command test_sensitive_properties test_import_stream
+test: test_iscsi test_zfspoolplugin test_lvmplugin test_lvm_create test_lvm_lock_retry test_lvm_base_volume test_lvm_hints test_disklist test_bwlimit test_plugin test_ovf test_volume_access test_remote_command test_sensitive_properties test_import_stream test_multipath
 
 test_zfspoolplugin: run_test_zfspoolplugin.pl
 	./run_test_zfspoolplugin.pl
@@ -52,3 +52,6 @@ test_sensitive_properties: run_sensitive_properties_tests.pl
 
 test_import_stream: run_import_stream_tests.pl
 	./run_import_stream_tests.pl
+
+test_multipath: run_multipath_tests.pl
+	./run_multipath_tests.pl
diff --git a/src/test/multipath-three-states.json b/src/test/multipath-three-states.json
new file mode 100644
index 00000000..b39b123f
--- /dev/null
+++ b/src/test/multipath-three-states.json
@@ -0,0 +1,52 @@
+{
+    "major_version": 0,
+    "minor_version": 1,
+    "maps": [
+        {
+            "name": "mpatha",
+            "uuid": "3600140500a1b2c3d4e5f6a7b8c9d0e1f",
+            "sysfs": "dm-0",
+            "dm_st": "active",
+            "paths": 2,
+            "path_faults": 0,
+            "path_groups": [{
+                "group": 1,
+                "dm_st": "active",
+                "pri": 50,
+                "paths": [
+                    { "dev": "sdb", "dm_st": "active", "dev_st": "running", "chk_st": "ready", "pri": 50, "host_wwpn": "0x21000024ff7d6a1c", "target_wwpn": "0x500a098000000001" },
+                    { "dev": "sdc", "dm_st": "active", "dev_st": "running", "chk_st": "ready", "pri": 50, "host_wwpn": "0x21000024ff7d6a1d", "target_wwpn": "0x500a098000000002" }
+                ]
+            }]
+        },
+        {
+            "name": "mpathb",
+            "uuid": "360014050aabbccddeeff00112233445566",
+            "sysfs": "dm-1",
+            "dm_st": "active",
+            "paths": 2,
+            "path_faults": 3,
+            "path_groups": [
+                { "group": 1, "dm_st": "active", "pri": 10, "paths": [
+                    { "dev": "sdd", "dm_st": "active", "dev_st": "running", "chk_st": "ready", "pri": 10 }
+                ] },
+                { "group": 2, "dm_st": "enabled", "pri": 0, "paths": [
+                    { "dev": "sde", "dm_st": "failed", "dev_st": "offline", "chk_st": "faulty", "pri": 0 }
+                ] }
+            ]
+        },
+        {
+            "name": "mpathc",
+            "uuid": "36001405ffffffffffffffffffffffffff",
+            "sysfs": "dm-2",
+            "dm_st": "active",
+            "paths": 1,
+            "path_groups": [{
+                "group": 1,
+                "dm_st": "enabled",
+                "pri": 0,
+                "paths": [{ "dev": "sdf", "dm_st": "failed", "dev_st": "offline", "chk_st": "faulty", "pri": 0, "target_wwpn": "[undef]", "host_adapter": "[undef]" }]
+            }]
+        }
+    ]
+}
diff --git a/src/test/run_multipath_tests.pl b/src/test/run_multipath_tests.pl
new file mode 100755
index 00000000..b1248ad0
--- /dev/null
+++ b/src/test/run_multipath_tests.pl
@@ -0,0 +1,106 @@
+#!/usr/bin/perl
+
+use v5.36;
+use lib ('.', '..');
+use Test::More;
+use PVE::Multipath;
+use PVE::Tools qw(file_get_contents);
+
+subtest 'multipathd JSON fixtures' => sub {
+    my $maps =
+        PVE::Multipath::parse_maps_json(file_get_contents('multipath-three-states.json'));
+    is_deeply(
+        [map { [$_->{'paths-active'}, $_->{'paths-total'}] } @$maps],
+        [[2, 2], [1, 2], [0, 1]],
+        'fixture path counts',
+    );
+    is_deeply(
+        [
+            map { PVE::Multipath::derive_health($_->{'paths-active'}, $_->{'paths-total'}) }
+                @$maps
+        ],
+        [qw(optimal degraded failed)],
+        'health is derived by consumers',
+    );
+    is_deeply(
+        [sort keys $maps->[0]->%*],
+        [qw(name paths paths-active paths-total sysfs wwid)],
+        'only consumed map fields are parsed',
+    );
+    is_deeply(
+        [sort keys $maps->[0]->{paths}->[0]->%*],
+        [qw(check-state dev dm-state host-wwpn target-wwpn)],
+        'only consumed path fields are parsed',
+    );
+    is($maps->[0]->{paths}->[0]->{'target-wwpn'}, '0x500a098000000001', 'FC target port');
+    my $json = '{ "maps": [ { "uuid": "3600a", "path_groups": [
+        { "group": 1, "pri": 50, "paths": [ { "dev": "sda", "dm_st": "active", "chk_st": "ready" } ] },
+        { "group": 2, "pri": 10, "paths": [ { "dev": "sdb", "dm_st": "active", "chk_st": "ghost" } ] }
+    ] } ] }';
+    my $map = PVE::Multipath::parse_maps_json($json)->[0];
+    is($map->{'paths-active'}, 2, 'ALUA ghost path is usable');
+    is_deeply(
+        [map { $_->{dev} } $map->{paths}->@*],
+        ['sda', 'sdb'],
+        'groups flatten into one path list',
+    );
+    $json =~ s/"ghost"/"faulty"/;
+    is(
+        PVE::Multipath::parse_maps_json($json)->[0]->{'paths-active'},
+        1,
+        'faulty path is unusable',
+    );
+    $json =~ s/"ready"/"faulty"/;
+    is(PVE::Multipath::parse_maps_json($json)->[0]->{'paths-active'}, 0, 'no usable paths');
+    $json = '{ "maps": [ { "uuid": "3600a", "path_faults": "7", "path_groups": [
+        { "group": "1", "pri": "50", "paths": [ { "dev": "sda", "dm_st": "active", "pri": "50" } ] }
+    ] } ] }';
+    $map = PVE::Multipath::parse_maps_json($json)->[0];
+    is_deeply(
+        $map,
+        {
+            wwid => '3600a',
+            'paths-active' => 1,
+            'paths-total' => 1,
+            paths => [{ dev => 'sda', 'dm-state' => 'active' }],
+        },
+        'numeric strings in unused fields are ignored',
+    );
+    $json = '{ "maps": [ { "uuid": "3600a", "path_groups": [ { "group": 1, "pri": 50, "paths": [
+        { "dev": "sda", "dm_st": "active", "host_wwpn": "[unknown]", "target_wwpn": "[unknown]" }
+    ] } ] } ] }';
+    my $path = PVE::Multipath::parse_maps_json($json)->[0]->{paths}->[0];
+    ok(!exists($path->{'host-wwpn'}), 'unknown WWPN is omitted');
+    $json =~ s/\[unknown\]/[undef]/g;
+    $path = PVE::Multipath::parse_maps_json($json)->[0]->{paths}->[0];
+    ok(!exists($path->{'target-wwpn'}), 'undefined WWPN is omitted');
+    is(
+        PVE::Multipath::parse_maps_json("{\"maps\":[{\"name\":\"lun\xff\"}]}")->[0]->{name},
+        "lun\x{fffd}",
+        'invalid UTF-8 alias is replaced, not a query failure',
+    );
+    is_deeply(PVE::Multipath::parse_maps_json('{}'), [], 'empty response');
+    is_deeply(PVE::Multipath::parse_maps_json('{"maps":[]}'), [], 'empty list');
+    eval { PVE::Multipath::parse_maps_json('not json') };
+    ok($@, 'invalid JSON fails');
+    is(PVE::Multipath::derive_health(1, 1, 2), 'degraded', 'removed expected path is degraded');
+    is(PVE::Multipath::derive_health(0, 0), 'failed', 'empty map is failed');
+};
+
+subtest 'one owner for map identity and membership' => sub {
+    is_deeply(PVE::Multipath::parse_dm_uuid('mpath-3600a'), { wwid => '3600a' }, 'whole map');
+    is_deeply(
+        PVE::Multipath::parse_dm_uuid('part2-mpath-3600a'),
+        { wwid => '3600a', partition => 2 },
+        'partition of map',
+    );
+    ok(!PVE::Multipath::parse_dm_uuid('LVM-abc'), 'LV is not a multipath map');
+    ok(!PVE::Multipath::parse_dm_uuid(undef), 'no identity does not invent a map');
+    is_deeply(
+        PVE::Multipath::member_map({ 'dm-0' => { slaves => ['sdb', 'sdc'] } }),
+        { sdb => 'dm-0', sdc => 'dm-0' },
+        'membership belongs to the map facts',
+    );
+};
+
+done_testing();




  parent reply	other threads:[~2026-11-18 20:28 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-18 20:25 [PATCH v7 cluster,storage,docs,manager 00/43] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 cluster 01/43] cfs: observe the multipath configuration files Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 02/43] diskmanage: collect disk transport type from lsblk Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 03/43] diskmanage: qualify NVMe over Fabrics transport Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 04/43] diskmanage: optionally include iSCSI session devices in disk enumeration Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 05/43] diskmanage: collect native NVMe multipath path state Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 06/43] iscsi: factor out session device map from device list Thomas Lamprecht
2026-11-18 20:25 ` Thomas Lamprecht [this message]
2026-11-18 20:25 ` [PATCH v7 storage 08/43] diskmanage: add helper to list multipath devices Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 09/43] multipath: add a cluster-wide configuration Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 10/43] iscsi: add an option to manage storage LUNs with multipath Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 11/43] lvm: activate a missing base volume before using the volume group Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 12/43] multipath: apply the configuration on every node Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 13/43] multipath: publish per-node status Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 14/43] api: add endpoints for the cluster-wide multipath configuration Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 15/43] api: multipath: add the cluster-wide health status Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 16/43] diskmanage: look up the requested disks by name Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 17/43] diskmanage: read the udev data of all disks with one call Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 18/43] api: scan: add a SAN LUN inventory Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 19/43] pvesm: expose the " Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 20/43] api: add node-level iSCSI status Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 21/43] api: scan: name the portal of an iSCSI path Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 22/43] disks: lvm: drop unused imports Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 23/43] disks: lvm: allow volume groups on SAN LUNs and multipath maps Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 24/43] disks: lvm: refuse to destroy the volume group of a shared storage Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 25/43] disks: allow wiping a SAN LUN that no storage uses Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 26/43] api: scan: report the process that has a SAN LUN open Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 docs 27/43] storage: document the cluster-wide multipath management Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 docs 28/43] storage: multipath: describe the use shown for an open LUN Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 29/43] pvestatd: apply the multipath configuration and report the node status Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 30/43] report: add the managed multipath configuration Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 31/43] api: cluster: add the multipath endpoints Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 32/43] api: nodes: expose the iSCSI status Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 33/43] ui: dc: add a SAN view Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 34/43] ui: storage: iscsi: add the multipath option Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 35/43] ui: lvm: enable shared when a base storage is selected Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 36/43] ui: node: add SAN LUNs panel Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 37/43] ui: node: san: wipe a LUN that no storage uses Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 38/43] ui: node: san: show iSCSI targets and sessions Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 39/43] ui: dc: san: add a guided setup for shared LVM on iSCSI Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 40/43] ui: dc: san: add a guided setup for shared LVM on Fibre Channel Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 41/43] ui: storage: point the iSCSI and LVM add dialogs to the SAN view Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 42/43] ui: san: show the guest or process that has a LUN open Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 43/43] ui: node: san: add a column for the target or subsystem of a LUN Thomas Lamprecht
2026-11-19 19:49 ` superseded: [PATCH v7 cluster,storage,docs,manager 00/43] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM Thomas Lamprecht

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261118202646.3017286-8-t.lamprecht@proxmox.com \
    --to=t.lamprecht@proxmox.com \
    --cc=pve-devel@lists.proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal