From: Daniel Kral <d.kral@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH-SERIES ha-manager v3 00/17] some sid parsing and LRM speedup improvements
Date: Wed, 18 Nov 2026 15:25:39 +0100 [thread overview]
Message-ID: <20261118142556.218589-1-d.kral@proxmox.com> (raw)
Changes since v2 (thanks a lot @Michael!):
- add R-b and T-b from @Michael to patches except #2 and #9
- drop s/$name/$vmid/ from PVE::HA::LRM and PVE::HA::Resources in #2
- new patch #9: use an eval around the maintenance work branch, similar
to what is catched in the active work branch
Before it gets unnoticed: A user reported some results for v1 of this
patch series, which shows a test on another larger setup [0].
Changes since v1:
- rebase on master
- cleanup the patch messages a bit
- cache the read_service_config() instead of putting it in the 'new'
update_lrm_status() to not change the current behavior as well
unnecessarily reading the HA resource config in idle rounds
- do not prune LRM results in flush_lrm_status() but properly prune
these in update_lrm_status() and resource_command_finished(), because
flush_lrm_status() could be called by a signal handler calling
shutdown_request()
v1: https://lore.proxmox.com/pve-devel/20260720123705.216089-1-d.kral@proxmox.com/
v2: https://lore.proxmox.com/pve-devel/20261112163113.294302-3-d.kral@proxmox.com/
It was reported in the enterprise support, that nodes with high counts
of HA resources (250+ HA resources) cause the pve-ha-lrm daemon to
consumes quite a lot of CPU time while being idle. Furthermore,
migration commands for HA resources might take quite a long time to be
actually committed when the max_workers value is not high enough.
This smaller patch series tries to mitigate the former issue first,
which consists of making some performance improvements for the hot LRM
code paths, which consumed the most resources:
- the service config is read and validated very often
- because of that, parse_sid() is called many times as well
- other smaller loops are redundant and are moved out of the hot paths
I started out with making parse_sid() a little lighter, though because
of the latter changes the performance bottleneck of parse_sid() became
rather meaningless. I left the refactoring and changes in though as
having a stricter separation where both VMIDs and SIDs can be used and
where only SIDs can be used is a little nicer now.
The patch series consists of:
PATCH 1-2 small cleanups
PATCH 3-8 refactoring and splitting up parse_sid() and its users
PATCH 9 eval block around maintenance work branch
PATCH 10-12 prep work to add documentation and rename some methods
PATCH 13 reading the manager status only once per work iteration
PATCH 14 reading the service config only once per work iteration
PATCH 15-17 factoring out loops which are invariant per work iteration
A test startup of 768 HA resources on a single physical host at the same
time, profiling with Devel::NYTProf 6.14 [0] showed the following:
+---------------------------+---------------+--------------+
| Subroutine | Before Change | After Change |
+---------------------------+---------------+--------------+
| check_active_workers | 327ms | 998µs |
| resource_command_finished | 22.7ms | 50µs |
| handle_service_exitcode | 21.1ms | 12µs |
+---------------------------+---------------+--------------+
Considering that these are called quite often per LRM cycle, these drops
in execution time per call are significant and reduce how much CPU% the
pve-ha-lrm main thread uses.
[0] https://bugzilla.proxmox.com/show_bug.cgi?id=8233
Daniel Kral (17):
resources: remove commented ipaddr resource type
tree-wide: use the term vmid instead of name when referring to VMs/CTs
tree-wide: remove unused return values at parse_sid callsites
config: make update_single_resource_config_inplace only allow sids
make parse_sid always return an array
config: use early returns in parse_sid
config: introduce separate parse_vmid_or_sid helper subroutine
drop the unmodified sid return array entry value from parse_sid
lrm: catch and report dies while the LRM is in maintenance state
lrm: rename update_lrm_status to flush_lrm_status
lrm: rename update_service_status to update_lrm_status
lrm: document and initialize LRM instance properties
lrm: update the service status once per work iteration
lrm: read service config once per work iteration
lrm: compute valid service uids hash set once per work iteration
lrm: resource_command_finished: avoid writing stale LRM results
lrm: prune stale LRM results once per work iteration
src/PVE/API2/HA/Resources.pm | 17 +--
src/PVE/CLI/ha_manager.pm | 6 +-
src/PVE/HA/Config.pm | 42 +++----
src/PVE/HA/Env/PVE2.pm | 6 +-
src/PVE/HA/LRM.pm | 128 ++++++++++++++--------
src/PVE/HA/Manager.pm | 4 +-
src/PVE/HA/Resources.pm | 26 -----
src/PVE/HA/Resources/PVECT.pm | 4 +-
src/PVE/HA/Resources/PVEVM.pm | 4 +-
src/PVE/HA/Sim/Env.pm | 4 +-
src/test/test-cfs-unavailable1/log.expect | 5 -
src/test/test-group-migrate4/log.expect | 10 --
12 files changed, 130 insertions(+), 126 deletions(-)
--
2.47.3
next reply other threads:[~2026-11-18 14:26 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 14:25 Daniel Kral [this message]
2026-11-18 14:25 ` [PATCH ha-manager v3 01/17] resources: remove commented ipaddr resource type Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 02/17] tree-wide: use the term vmid instead of name when referring to VMs/CTs Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 03/17] tree-wide: remove unused return values at parse_sid callsites Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 04/17] config: make update_single_resource_config_inplace only allow sids Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 05/17] make parse_sid always return an array Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 06/17] config: use early returns in parse_sid Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 07/17] config: introduce separate parse_vmid_or_sid helper subroutine Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 08/17] drop the unmodified sid return array entry value from parse_sid Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 09/17] lrm: catch and report dies while the LRM is in maintenance state Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 10/17] lrm: rename update_lrm_status to flush_lrm_status Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 11/17] lrm: rename update_service_status to update_lrm_status Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 12/17] lrm: document and initialize LRM instance properties Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 13/17] lrm: update the service status once per work iteration Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 14/17] lrm: read service config " Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 15/17] lrm: compute valid service uids hash set " Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 16/17] lrm: resource_command_finished: avoid writing stale LRM results Daniel Kral
2026-11-18 14:25 ` [PATCH ha-manager v3 17/17] lrm: prune stale LRM results once per work iteration Daniel Kral
2026-11-18 14:46 ` superseded: [PATCH-SERIES ha-manager v3 00/17] some sid parsing and LRM speedup improvements Daniel Kral
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261118142556.218589-1-d.kral@proxmox.com \
--to=d.kral@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.