From: Thomas Lamprecht <t.lamprecht@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH installer 2/5] auto: support full-disk encryption in answer files
Date: Wed, 18 Nov 2026 00:42:26 +0100 [thread overview]
Message-ID: <20261117234330.801935-4-t.lamprecht@proxmox.com> (raw)
In-Reply-To: <20261117234330.801935-1-t.lamprecht@proxmox.com>
Pass the `[disk-setup.encryption]` section of answer files on to the
low-level installer, which picks LUKS2 or native ZFS encryption based
on the filesystem. The encryption options are checked along with the
rest of the answer file, before any disk is touched.
The post-installation webhook reports the encryption mode, as schema
version 1.4. proxmox-chroot loads the key of a natively encrypted pool
from the saved installation config, so that the post-installation hook
sees the installed system and not a pool imported with all its
datasets locked and unmounted. In a rescue shell, where no such config
exists, it asks for the passphrase on the terminal, and it exports the
pool again if unlocking fails, so that it can be retried.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
---
Cargo.toml | 2 +-
debian/control | 2 +-
proxmox-auto-installer/src/utils.rs | 13 ++-
proxmox-auto-installer/tests/parse-answer.rs | 5 +
.../parse_answer/encryption_luks.json | 26 +++++
.../parse_answer/encryption_luks.toml | 17 ++++
.../parse_answer/encryption_zfs.json | 36 +++++++
.../parse_answer/encryption_zfs.toml | 24 +++++
.../encryption_empty_passphrase.json | 3 +
.../encryption_empty_passphrase.toml | 17 ++++
.../encryption_passphrase_control_char.json | 3 +
.../encryption_passphrase_control_char.toml | 17 ++++
.../encryption_passphrase_too_short.json | 3 +
.../encryption_passphrase_too_short.toml | 17 ++++
proxmox-chroot/src/main.rs | 95 +++++++++++++++++++
proxmox-installer-common/src/setup.rs | 17 ++++
proxmox-post-hook/src/main.rs | 8 +-
proxmox-tui-installer/src/setup.rs | 1 +
18 files changed, 300 insertions(+), 6 deletions(-)
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/encryption_luks.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/encryption_luks.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/encryption_zfs.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/encryption_zfs.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_empty_passphrase.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_empty_passphrase.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_control_char.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_control_char.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_too_short.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_too_short.toml
diff --git a/Cargo.toml b/Cargo.toml
index 90ee0415..c3abf84b 100644
--- a/Cargo.toml
+++ b/Cargo.toml
@@ -28,7 +28,7 @@ toml = "0.8"
proxmox-auto-installer.path = "./proxmox-auto-installer"
proxmox-installer-common.path = "./proxmox-installer-common"
proxmox-network-types = "1.2"
-proxmox-installer-types = { version = "0.3.1", features = ["legacy"] }
+proxmox-installer-types = { version = "0.4", features = ["legacy"] }
# Local path overrides
# NOTE: You must run `cargo update` after changing this for it to take effect!
diff --git a/debian/control b/debian/control
index 7371908c..8de90ba4 100644
--- a/debian/control
+++ b/debian/control
@@ -19,7 +19,7 @@ Build-Depends: cargo:native,
librust-native-tls-dev,
librust-pico-args-0.5-dev,
librust-pretty-assertions-1.4-dev,
- librust-proxmox-installer-types-0.3+legacy-dev (>= 0.3.1-~~),
+ librust-proxmox-installer-types-0.4+legacy-dev,
librust-proxmox-network-types-1-dev (>= 1.2-~~),
librust-proxmox-sys+crypt-dev,
librust-regex-1+default-dev (>= 1.7~~),
diff --git a/proxmox-auto-installer/src/utils.rs b/proxmox-auto-installer/src/utils.rs
index 9813f56e..bfa54e4e 100644
--- a/proxmox-auto-installer/src/utils.rs
+++ b/proxmox-auto-installer/src/utils.rs
@@ -23,8 +23,8 @@ use proxmox_installer_common::{
is_bond_mode_unsuitable_for_bridge,
},
setup::{
- InstallBtrfsOption, InstallConfig, InstallFirstBootSetup, InstallRootPassword,
- InstallZfsOption, LocaleInfo, NetworkInfo, RuntimeInfo, SetupInfo,
+ InstallBtrfsOption, InstallConfig, InstallEncryption, InstallFirstBootSetup,
+ InstallRootPassword, InstallZfsOption, LocaleInfo, NetworkInfo, RuntimeInfo, SetupInfo,
},
};
use proxmox_network_types::MacAddress;
@@ -615,6 +615,8 @@ pub fn verify_disks_settings(answer: &AutoInstallerConfig) -> Result<()> {
_ => {}
}
+ answer.disks.verify_encryption()?;
+
Ok(())
}
@@ -745,6 +747,7 @@ pub fn parse_answer(
maxvz: None,
zfs_opts: None,
btrfs_opts: None,
+ encryption: None,
target_hd: None,
disk_selection: BTreeMap::new(),
existing_storage_auto_rename: 1,
@@ -820,6 +823,12 @@ pub fn parse_answer(
}
}
+ if let Some(encryption) = &answer.disks.encryption {
+ config.encryption = Some(InstallEncryption {
+ passphrase: encryption.passphrase.clone(),
+ });
+ }
+
if let Some(first_boot) = &answer.first_boot {
config.first_boot.enabled = true;
config.first_boot.ordering_target =
diff --git a/proxmox-auto-installer/tests/parse-answer.rs b/proxmox-auto-installer/tests/parse-answer.rs
index 1923bf84..c4652225 100644
--- a/proxmox-auto-installer/tests/parse-answer.rs
+++ b/proxmox-auto-installer/tests/parse-answer.rs
@@ -121,6 +121,8 @@ mod tests {
disk_match_all,
disk_match_all_missing_property,
disk_match_any,
+ encryption_luks,
+ encryption_zfs,
first_boot,
fqdn_from_dhcp,
fqdn_from_dhcp_empty_dhcp_domain_setting,
@@ -156,6 +158,9 @@ mod tests {
both_password_and_hashed_set,
btrfs_raid_single_disk,
duplicate_disk,
+ encryption_empty_passphrase,
+ encryption_passphrase_control_char,
+ encryption_passphrase_too_short,
fqdn_from_dhcp_no_default_domain,
fqdn_hostname_only,
ipv4_and_subnet_mask_33,
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/encryption_luks.json b/proxmox-auto-installer/tests/resources/parse_answer/encryption_luks.json
new file mode 100644
index 00000000..f161ee7f
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/encryption_luks.json
@@ -0,0 +1,26 @@
+{
+ "autoreboot": 1,
+ "cidr": "192.168.1.114/24",
+ "country": "at",
+ "dns": "192.168.1.254",
+ "domain": "testinstall",
+ "filesys": "ext4",
+ "gateway": "192.168.1.1",
+ "hdsize": 223.57088470458984,
+ "existing_storage_auto_rename": 1,
+ "hostname": "pveauto",
+ "keymap": "de",
+ "mailto": "mail@no.invalid",
+ "mngmt_nic": "eno1",
+ "root_password": {
+ "plain": "12345678"
+ },
+ "target_hd": "/dev/sda",
+ "timezone": "Europe/Vienna",
+ "first_boot": {
+ "enabled": 0
+ },
+ "encryption": {
+ "passphrase": "pässphrase"
+ }
+}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/encryption_luks.toml b/proxmox-auto-installer/tests/resources/parse_answer/encryption_luks.toml
new file mode 100644
index 00000000..3cfa43e1
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/encryption_luks.toml
@@ -0,0 +1,17 @@
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pveauto.testinstall"
+mailto = "mail@no.invalid"
+timezone = "Europe/Vienna"
+root-password = "12345678"
+
+[network]
+source = "from-dhcp"
+
+[disk-setup]
+filesystem = "ext4"
+disk-list = ["sda"]
+
+[disk-setup.encryption]
+passphrase = "p\u00e4ssphrase"
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/encryption_zfs.json b/proxmox-auto-installer/tests/resources/parse_answer/encryption_zfs.json
new file mode 100644
index 00000000..d284edc8
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/encryption_zfs.json
@@ -0,0 +1,36 @@
+{
+ "autoreboot": 1,
+ "cidr": "192.168.1.114/24",
+ "country": "at",
+ "dns": "192.168.1.254",
+ "domain": "testinstall",
+ "disk_selection": {
+ "6": "6",
+ "7": "7"
+ },
+ "existing_storage_auto_rename": 1,
+ "filesys": "zfs (RAID1)",
+ "gateway": "192.168.1.1",
+ "hdsize": 80.0,
+ "hostname": "pveauto",
+ "keymap": "de",
+ "mailto": "mail@no.invalid",
+ "mngmt_nic": "eno1",
+ "root_password": {
+ "plain": "12345678"
+ },
+ "timezone": "Europe/Vienna",
+ "zfs_opts": {
+ "arc_max": 2048,
+ "ashift": 12,
+ "checksum": "on",
+ "compress": "lz4",
+ "copies": 2
+ },
+ "first_boot": {
+ "enabled": 0
+ },
+ "encryption": {
+ "passphrase": "zfs passphrase"
+ }
+}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/encryption_zfs.toml b/proxmox-auto-installer/tests/resources/parse_answer/encryption_zfs.toml
new file mode 100644
index 00000000..9b6baf79
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/encryption_zfs.toml
@@ -0,0 +1,24 @@
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pveauto.testinstall"
+mailto = "mail@no.invalid"
+timezone = "Europe/Vienna"
+root-password = "12345678"
+
+[network]
+source = "from-dhcp"
+
+[disk-setup]
+filesystem = "zfs"
+zfs.raid = "raid1"
+zfs.ashift = 12
+zfs.checksum = "on"
+zfs.compress = "lz4"
+zfs.copies = 2
+zfs.hdsize = 80
+zfs.arc-max = 2048
+disk-list = ["sda", "sdb"]
+
+[disk-setup.encryption]
+passphrase = "zfs passphrase"
diff --git a/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_empty_passphrase.json b/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_empty_passphrase.json
new file mode 100644
index 00000000..6ad207d7
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_empty_passphrase.json
@@ -0,0 +1,3 @@
+{
+ "error": "'disk-setup.encryption.passphrase' must be at least 8 characters long"
+}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_empty_passphrase.toml b/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_empty_passphrase.toml
new file mode 100644
index 00000000..3e02c3f6
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_empty_passphrase.toml
@@ -0,0 +1,17 @@
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pveauto.testinstall"
+mailto = "mail@no.invalid"
+timezone = "Europe/Vienna"
+root-password = "12345678"
+
+[network]
+source = "from-dhcp"
+
+[disk-setup]
+filesystem = "ext4"
+disk-list = ["sda"]
+
+[disk-setup.encryption]
+passphrase = ""
diff --git a/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_control_char.json b/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_control_char.json
new file mode 100644
index 00000000..36414984
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_control_char.json
@@ -0,0 +1,3 @@
+{
+ "error": "'disk-setup.encryption.passphrase' must not contain control characters"
+}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_control_char.toml b/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_control_char.toml
new file mode 100644
index 00000000..39c02370
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_control_char.toml
@@ -0,0 +1,17 @@
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pveauto.testinstall"
+mailto = "mail@no.invalid"
+timezone = "Europe/Vienna"
+root-password = "12345678"
+
+[network]
+source = "from-dhcp"
+
+[disk-setup]
+filesystem = "ext4"
+disk-list = ["sda"]
+
+[disk-setup.encryption]
+passphrase = "pass\nphrase"
diff --git a/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_too_short.json b/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_too_short.json
new file mode 100644
index 00000000..6ad207d7
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_too_short.json
@@ -0,0 +1,3 @@
+{
+ "error": "'disk-setup.encryption.passphrase' must be at least 8 characters long"
+}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_too_short.toml b/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_too_short.toml
new file mode 100644
index 00000000..ef00995b
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer_fail/encryption_passphrase_too_short.toml
@@ -0,0 +1,17 @@
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pveauto.testinstall"
+mailto = "mail@no.invalid"
+timezone = "Europe/Vienna"
+root-password = "12345678"
+
+[network]
+source = "from-dhcp"
+
+[disk-setup]
+filesystem = "ext4"
+disk-list = ["sda"]
+
+[disk-setup.encryption]
+passphrase = "p\u00e4sswor"
diff --git a/proxmox-chroot/src/main.rs b/proxmox-chroot/src/main.rs
index bcba1ce5..d6cd48b7 100644
--- a/proxmox-chroot/src/main.rs
+++ b/proxmox-chroot/src/main.rs
@@ -240,10 +240,105 @@ fn mount_zpool(pool_id: Option<u64>) -> Result<()> {
Ok(s) if !s.success() => bail!("Could not import ZFS pool. Abort!"),
_ => (),
}
+
+ // A natively encrypted pool imports with its datasets locked and unmounted, so import success
+ // alone does not mean that the target is mounted.
+ if let Err(err) = unlock_zpool() {
+ // exported again, so that a retry can import it
+ umount_zpool();
+ return Err(err);
+ }
+
println!("successfully imported ZFS pool to {TARGET_DIR}");
Ok(())
}
+fn unlock_zpool() -> Result<()> {
+ if !zpool_keystatus_unavailable()? {
+ return Ok(());
+ }
+
+ load_zpool_key()?;
+ // Only this pool, other pools may be imported in the installer environment.
+ let status = Command::new("zfs")
+ .args(["mount", "-R", ZPOOL_NAME])
+ .status()
+ .map_err(|err| anyhow::anyhow!("failed to run 'zfs mount -R {ZPOOL_NAME}': {err}"))?;
+ if !status.success() {
+ bail!("could not mount the datasets of '{ZPOOL_NAME}' after loading its key");
+ }
+ let mounted = Command::new("mountpoint")
+ .args(["-q", TARGET_DIR])
+ .status()
+ .map_err(|err| anyhow::anyhow!("failed to run 'mountpoint': {err}"))?;
+ if !mounted.success() {
+ bail!("{TARGET_DIR} is not mounted after unlocking '{ZPOOL_NAME}'");
+ }
+ Ok(())
+}
+
+/// Whether the pool's encryption root still needs its key loaded. An unencrypted pool reports `-`.
+fn zpool_keystatus_unavailable() -> Result<bool> {
+ let out = Command::new("zfs")
+ .args(["get", "-H", "-o", "value", "keystatus", ZPOOL_NAME])
+ .output()
+ .map_err(|err| anyhow::anyhow!("failed to query ZFS keystatus: {err}"))?;
+ if !out.status.success() {
+ bail!(
+ "failed to query the keystatus of '{ZPOOL_NAME}': {}",
+ String::from_utf8_lossy(&out.stderr).trim()
+ );
+ }
+ match String::from_utf8_lossy(&out.stdout).trim() {
+ "unavailable" => Ok(true),
+ "available" | "-" => Ok(false),
+ other => bail!("unexpected keystatus '{other}' for '{ZPOOL_NAME}'"),
+ }
+}
+
+/// Right after an installation, the passphrase comes from the 0600 low-level config on the
+/// installer's tmpfs, as the caller may be the unattended post-installation hook. Otherwise, for
+/// example in a rescue shell, `zfs` asks for it on the terminal.
+fn load_zpool_key() -> Result<()> {
+ use std::io::{IsTerminal, Write};
+
+ let passphrase = get_low_level_config()
+ .ok()
+ .and_then(|config| config.encryption)
+ .map(|encryption| encryption.passphrase);
+ let Some(passphrase) = passphrase else {
+ if !io::stdin().is_terminal() {
+ bail!(
+ "cannot unlock ZFS pool '{ZPOOL_NAME}' - its passphrase can only be entered on a terminal"
+ );
+ }
+ let status = Command::new("zfs")
+ .args(["load-key", ZPOOL_NAME])
+ .status()
+ .map_err(|err| anyhow::anyhow!("failed to run 'zfs load-key': {err}"))?;
+ if !status.success() {
+ bail!("could not load the key of ZFS pool '{ZPOOL_NAME}'");
+ }
+ return Ok(());
+ };
+
+ let mut child = Command::new("zfs")
+ .args(["load-key", "-L", "prompt", ZPOOL_NAME])
+ .stdin(process::Stdio::piped())
+ .spawn()
+ .map_err(|err| anyhow::anyhow!("failed to run 'zfs load-key': {err}"))?;
+ child
+ .stdin
+ .as_mut()
+ .ok_or_else(|| anyhow::anyhow!("could not write to 'zfs load-key' stdin"))?
+ .write_all(format!("{passphrase}\n").as_bytes())?;
+
+ if !child.wait()?.success() {
+ bail!("'zfs load-key' failed for pool '{ZPOOL_NAME}'");
+ }
+ Ok(())
+}
+
fn umount_zpool() {
match Command::new("zpool").arg("export").arg(ZPOOL_NAME).status() {
Ok(s) if !s.success() => println!("failure on exporting {ZPOOL_NAME}"),
diff --git a/proxmox-installer-common/src/setup.rs b/proxmox-installer-common/src/setup.rs
index 3882f892..9e041e4c 100644
--- a/proxmox-installer-common/src/setup.rs
+++ b/proxmox-installer-common/src/setup.rs
@@ -546,6 +546,20 @@ pub fn spawn_low_level_installer(test_mode: bool) -> io::Result<process::Child>
.spawn()
}
+/// See Proxmox::Install::Config
+#[derive(Clone, Deserialize, Serialize)]
+pub struct InstallEncryption {
+ pub passphrase: String,
+}
+
+impl fmt::Debug for InstallEncryption {
+ fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
+ f.debug_struct("InstallEncryption")
+ .field("passphrase", &"<redacted>")
+ .finish()
+ }
+}
+
/// See Proxmox::Install::Config
#[derive(Debug, Deserialize, Serialize)]
pub struct InstallConfig {
@@ -568,6 +582,9 @@ pub struct InstallConfig {
#[serde(skip_serializing_if = "Option::is_none")]
pub btrfs_opts: Option<InstallBtrfsOption>,
+ #[serde(skip_serializing_if = "Option::is_none")]
+ pub encryption: Option<InstallEncryption>,
+
#[serde(skip_serializing_if = "Option::is_none")]
pub target_hd: Option<String>,
diff --git a/proxmox-post-hook/src/main.rs b/proxmox-post-hook/src/main.rs
index 4b24b16a..55ca515f 100644
--- a/proxmox-post-hook/src/main.rs
+++ b/proxmox-post-hook/src/main.rs
@@ -20,7 +20,7 @@ use proxmox_installer_common::http::{self, header::HeaderMap};
use proxmox_installer_types::answer::{AutoInstallerConfig, PostNotificationHookInfo};
/// Current version of the schema sent by this implementation.
-const POST_HOOK_SCHEMA_VERSION: &str = "1.3";
+const POST_HOOK_SCHEMA_VERSION: &str = "1.4";
mod detail {
use anyhow::{Context, Result, anyhow, bail};
@@ -39,7 +39,7 @@ mod detail {
setup::{InstallConfig, RuntimeInfo, SetupInfo, load_installer_setup_files},
};
use proxmox_installer_types::{
- ProxmoxProduct, SystemDMI, UdevInfo,
+ EncryptionMode, ProxmoxProduct, SystemDMI, UdevInfo,
answer::{AutoInstallerConfig, FqdnConfig, FqdnFromDhcpConfig, FqdnSourceMode},
post_hook::{
BootInfo, CpuInfo, DiskInfo, KernelVersionInformation, NetworkInterfaceInfo,
@@ -154,6 +154,10 @@ mod detail {
}
}),
filesystem: answer.disks.filesystem_details()?.to_type(),
+ encryption: config
+ .encryption
+ .as_ref()
+ .map(|_| EncryptionMode::for_filesystem(config.filesys)),
fqdn,
machine_id: read_file("/etc/machine-id").unwrap_or_else(|e| {
eprintln!("could not gather machine-id: {e:#}");
diff --git a/proxmox-tui-installer/src/setup.rs b/proxmox-tui-installer/src/setup.rs
index b8a990fd..fc3c43df 100644
--- a/proxmox-tui-installer/src/setup.rs
+++ b/proxmox-tui-installer/src/setup.rs
@@ -21,6 +21,7 @@ impl From<InstallerOptions> for InstallConfig {
maxvz: None,
zfs_opts: None,
btrfs_opts: None,
+ encryption: None,
target_hd: None,
disk_selection: BTreeMap::new(),
existing_storage_auto_rename: 0,
--
2.47.3
next prev parent reply other threads:[~2026-11-17 23:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 23:42 [PATCH proxmox/installer/docs 0/8] installer: add full-disk encryption of the system disks Thomas Lamprecht
2026-11-17 23:42 ` [PATCH proxmox 1/1] installer-types: add full-disk encryption to the disk setup Thomas Lamprecht
2026-11-17 23:42 ` [PATCH installer 1/5] install: encrypt the system disks with LUKS2 or native ZFS encryption Thomas Lamprecht
2026-11-17 23:42 ` Thomas Lamprecht [this message]
2026-11-17 23:42 ` [PATCH installer 3/5] chroot enter: unlock the LUKS containers of an encrypted installation Thomas Lamprecht
2026-11-17 23:42 ` [PATCH installer 4/5] ui: offer full-disk encryption in the graphical and terminal installer Thomas Lamprecht
2026-11-17 23:42 ` [PATCH installer 5/5] assistant: keep the disk passphrase out of prepared ISOs Thomas Lamprecht
2026-11-17 23:42 ` [PATCH docs 1/2] installation: describe full-disk encryption Thomas Lamprecht
2026-11-17 23:42 ` [PATCH docs 2/2] local-zfs: update the limitations of native encryption Thomas Lamprecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117234330.801935-4-t.lamprecht@proxmox.com \
--to=t.lamprecht@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.