all lists on lists.proxmox.com
 help / color / mirror / Atom feed
From: Hannes Laimer <h.laimer@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH docs/manager/network/proxmox{-perl-rs,-ve-rs} v3 0/9] add IPv6 RA / SLAAC support to EVPN zones
Date: Tue, 23 Jun 2026 14:56:17 +0200	[thread overview]
Message-ID: <20260623125626.1195681-1-h.laimer@proxmox.com> (raw)

This series adds IPv6 Router Advertisement / SLAAC support to EVPN zones.

RA settings sit on the vnet (`vnets.cfg`), per-prefix overrides on the subnet
(`subnets.cfg`). Defaults are chosen so that most IPv6 subnets work without
explicit per-prefix configuration.

It also enables `accept_untracked_na=2` on every EVPN vnet bridge that has an
IPv6 subnet, to keep first-packet IPv6 return traffic reliable in the
distributed anycast-gateway topology. The dedicated commit carries the full
rationale.

v3, thanks @Lukas S!:
 - validation no longer rejects valid IPv6 subnets: non-/64 prefixes and IPv6
   subnets using SNAT are accepted and editable again
 - improve FRR config generation so a single malformed subnet or a non-member
   node can no longer break it, and so configured prefix lifetimes are no
   longer silently dropped
 - cleaner EVPN gating and better per-prefix defaults, so most IPv6 subnets
   work without explicit configuration
 - cleanup UI, only persists meaningful settings
 - some smaller fixups


proxmox-perl-rs:

Hannes Laimer (1):
  pve-rs: sdn: add IPv6 RA builder binding

 pve-rs/Makefile                    |  1 +
 pve-rs/src/bindings/sdn/ipv6_ra.rs | 50 ++++++++++++++++++++++++++++++
 pve-rs/src/bindings/sdn/mod.rs     |  1 +
 3 files changed, 52 insertions(+)
 create mode 100644 pve-rs/src/bindings/sdn/ipv6_ra.rs


proxmox-ve-rs:

Hannes Laimer (2):
  frr: add IPv6 router advertisement support
  ve-config: add per-vnet IPv6 RA configuration

 .../templates/frr.conf.jinja                  |   1 +
 .../templates/nd_interfaces.jinja             |  28 +++
 proxmox-frr/src/ser/mod.rs                    |   6 +
 proxmox-frr/src/ser/nd.rs                     |  75 ++++++++
 proxmox-frr/src/ser/serializer.rs             |   6 +-
 proxmox-ve-config/src/sdn/config.rs           | 146 +++++++++++++++-
 proxmox-ve-config/src/sdn/mod.rs              |   1 +
 proxmox-ve-config/src/sdn/nd.rs               | 131 ++++++++++++++
 proxmox-ve-config/tests/nd/main.rs            | 164 ++++++++++++++++++
 .../nd__explicit_lifetimes_are_preserved.snap |   9 +
 .../nd__mixed_subnets_under_one_vnet.snap     |  14 ++
 .../snapshots/nd__no_autoconfig_prefix.snap   |   9 +
 ...sh64_prefix_defaults_to_no_autoconfig.snap |   9 +
 .../nd__off_link_emits_off_link_modifier.snap |   9 +
 ...__preferred_lifetime_clamped_to_valid.snap |   9 +
 ...vel_optional_knobs_are_passed_through.snap |  12 ++
 .../nd__slaac_with_default_lifetimes.snap     |   9 +
 17 files changed, 630 insertions(+), 8 deletions(-)
 create mode 100644 proxmox-frr-templates/templates/nd_interfaces.jinja
 create mode 100644 proxmox-frr/src/ser/nd.rs
 create mode 100644 proxmox-ve-config/src/sdn/nd.rs
 create mode 100644 proxmox-ve-config/tests/nd/main.rs
 create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__explicit_lifetimes_are_preserved.snap
 create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__mixed_subnets_under_one_vnet.snap
 create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__no_autoconfig_prefix.snap
 create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__non_slash64_prefix_defaults_to_no_autoconfig.snap
 create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__off_link_emits_off_link_modifier.snap
 create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__preferred_lifetime_clamped_to_valid.snap
 create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__ra_level_optional_knobs_are_passed_through.snap
 create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__slaac_with_default_lifetimes.snap


pve-manager:

Hannes Laimer (1):
  ui: sdn: add IPv6 RA / SLAAC support

 www/manager6/form/SDNVnetSelector.js |   2 +-
 www/manager6/sdn/SubnetEdit.js       | 130 ++++++++++++++++-
 www/manager6/sdn/SubnetView.js       |   7 +-
 www/manager6/sdn/VnetEdit.js         | 202 ++++++++++++++++++++++++++-
 www/manager6/sdn/VnetView.js         |   6 +-
 5 files changed, 339 insertions(+), 8 deletions(-)


pve-network:

Hannes Laimer (4):
  sdn: evpn: add IPv6 RA / SLAAC support
  sdn: evpn: derive IP version from CIDR for gateway-less subnets
  sdn: evpn: accept untracked IPv6 NA on EVPN vnet bridges
  api: vnet: include zone-type in vnet list

 src/PVE/API2/Network/SDN/Vnets.pm             | 13 +++
 src/PVE/Network/SDN.pm                        |  1 +
 src/PVE/Network/SDN/Controllers.pm            | 21 ++++-
 src/PVE/Network/SDN/Controllers/EvpnPlugin.pm | 22 ++++-
 src/PVE/Network/SDN/Controllers/Plugin.pm     |  2 +-
 src/PVE/Network/SDN/SubnetPlugin.pm           | 68 +++++++++++++++
 src/PVE/Network/SDN/VnetPlugin.pm             | 85 +++++++++++++++++++
 src/PVE/Network/SDN/Zones/EvpnPlugin.pm       | 24 ++++--
 src/PVE/Network/SDN/Zones/Plugin.pm           |  6 ++
 .../expected_sdn_interfaces                   |  1 +
 .../exitnode_snat/expected_sdn_interfaces     |  1 +
 .../exitnodenullroute/expected_sdn_interfaces |  1 +
 .../evpn/ipv4ipv6/expected_sdn_interfaces     |  1 +
 .../ipv4ipv6nogateway/expected_sdn_interfaces |  1 +
 .../zones/evpn/ipv6/expected_sdn_interfaces   |  1 +
 .../evpn/ipv6underlay/expected_sdn_interfaces |  1 +
 .../evpn/slaac/expected_controller_config     | 53 ++++++++++++
 .../zones/evpn/slaac/expected_sdn_interfaces  | 44 ++++++++++
 src/test/zones/evpn/slaac/interfaces          |  7 ++
 src/test/zones/evpn/slaac/sdn_config          | 41 +++++++++
 20 files changed, 384 insertions(+), 10 deletions(-)
 create mode 100644 src/test/zones/evpn/slaac/expected_controller_config
 create mode 100644 src/test/zones/evpn/slaac/expected_sdn_interfaces
 create mode 100644 src/test/zones/evpn/slaac/interfaces
 create mode 100644 src/test/zones/evpn/slaac/sdn_config


pve-docs:

Hannes Laimer (1):
  sdn: add IPv6 RA / SLAAC section

 pvesdn.adoc | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)


Summary over all repositories:
  46 files changed, 1473 insertions(+), 26 deletions(-)

-- 
Generated by murpp 0.12.0




             reply	other threads:[~2026-06-23 12:57 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-23 12:56 Hannes Laimer [this message]
2026-06-23 12:56 ` [PATCH proxmox-perl-rs v3 1/9] pve-rs: sdn: add IPv6 RA builder binding Hannes Laimer
2026-06-23 12:56 ` [PATCH proxmox-ve-rs v3 2/9] frr: add IPv6 router advertisement support Hannes Laimer
2026-06-23 12:56 ` [PATCH proxmox-ve-rs v3 3/9] ve-config: add per-vnet IPv6 RA configuration Hannes Laimer
2026-06-23 12:56 ` [PATCH pve-manager v3 4/9] ui: sdn: add IPv6 RA / SLAAC support Hannes Laimer
2026-06-23 12:56 ` [PATCH pve-network v3 5/9] sdn: evpn: " Hannes Laimer
2026-06-23 12:56 ` [PATCH pve-network v3 6/9] sdn: evpn: derive IP version from CIDR for gateway-less subnets Hannes Laimer
2026-06-23 12:56 ` [PATCH pve-network v3 7/9] sdn: evpn: accept untracked IPv6 NA on EVPN vnet bridges Hannes Laimer
2026-06-23 12:56 ` [PATCH pve-network v3 8/9] api: vnet: include zone-type in vnet list Hannes Laimer
2026-06-23 12:56 ` [PATCH pve-docs v3 9/9] sdn: add IPv6 RA / SLAAC section Hannes Laimer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260623125626.1195681-1-h.laimer@proxmox.com \
    --to=h.laimer@proxmox.com \
    --cc=pve-devel@lists.proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal