From: Stefan Hanreich <s.hanreich@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH pve-network 10/16] test: evpn: add test for ibgp + ebgp evpn controller
Date: Tue, 14 Apr 2026 18:33:07 +0200 [thread overview]
Message-ID: <20260414163315.419384-11-s.hanreich@proxmox.com> (raw)
In-Reply-To: <20260414163315.419384-1-s.hanreich@proxmox.com>
A test for an EVPN-only setup that utilizes iBGP for cluster-local
EVPN BGP, but eBGP for connecting to the outside world via eBGP.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
---
.../expected_controller_config | 66 +++++++++++++++++++
.../expected_sdn_interfaces | 41 ++++++++++++
.../evpn_cluster_ibgp_uplink_ebgp/interfaces | 7 ++
.../evpn_cluster_ibgp_uplink_ebgp/sdn_config | 51 ++++++++++++++
4 files changed, 165 insertions(+)
create mode 100644 src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/expected_controller_config
create mode 100644 src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/expected_sdn_interfaces
create mode 100644 src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/interfaces
create mode 100644 src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/sdn_config
diff --git a/src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/expected_controller_config b/src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/expected_controller_config
new file mode 100644
index 0000000..0199425
--- /dev/null
+++ b/src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/expected_controller_config
@@ -0,0 +1,66 @@
+frr version 10.4.1
+frr defaults datacenter
+hostname localhost
+log syslog informational
+service integrated-vtysh-config
+!
+vrf vrf_myzone
+ vni 1000
+exit-vrf
+!
+router bgp 65000
+ bgp router-id 192.168.0.1
+ no bgp hard-administrative-reset
+ no bgp default ipv4-unicast
+ coalesce-time 1000
+ no bgp graceful-restart notification
+ neighbor VTEP peer-group
+ neighbor VTEP remote-as 65000
+ neighbor VTEP bfd
+ neighbor 192.168.0.2 peer-group VTEP
+ neighbor 192.168.0.3 peer-group VTEP
+ neighbor uplink peer-group
+ neighbor uplink remote-as external
+ neighbor uplink bfd
+ neighbor 198.51.100.1 peer-group uplink
+ neighbor 198.51.100.2 peer-group uplink
+ !
+ address-family l2vpn evpn
+ neighbor VTEP activate
+ neighbor VTEP route-map MAP_VTEP_IN in
+ neighbor VTEP route-map MAP_VTEP_OUT out
+ neighbor uplink activate
+ neighbor uplink route-map MAP_VTEP_IN_uplink in
+ neighbor uplink route-map MAP_VTEP_OUT_uplink out
+ advertise-all-vni
+ exit-address-family
+exit
+!
+router bgp 65000 vrf vrf_myzone
+ bgp router-id 192.168.0.1
+ no bgp hard-administrative-reset
+ no bgp graceful-restart notification
+exit
+!
+bgp extcommunity-list standard pve_controller_cluster permit rt 65000:1000
+bgp extcommunity-list standard pve_controller_cluster permit rt 65000:100
+!
+bgp extcommunity-list standard pve_controller_uplink permit rt 65000:1000
+bgp extcommunity-list standard pve_controller_uplink permit rt 65000:100
+!
+route-map MAP_VTEP_IN permit 1
+exit
+!
+route-map MAP_VTEP_IN_uplink permit 1
+exit
+!
+route-map MAP_VTEP_OUT permit 1
+ match extcommunity pve_controller_cluster any
+exit
+!
+route-map MAP_VTEP_OUT_uplink permit 1
+ match extcommunity pve_controller_uplink any
+exit
+!
+line vty
+!
diff --git a/src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/expected_sdn_interfaces b/src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/expected_sdn_interfaces
new file mode 100644
index 0000000..4cf13e0
--- /dev/null
+++ b/src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/expected_sdn_interfaces
@@ -0,0 +1,41 @@
+#version:1
+
+auto myvnet
+iface myvnet
+ address 10.0.0.1/24
+ bridge_ports vxlan_myvnet
+ bridge_stp off
+ bridge_fd 0
+ mtu 1450
+ ip-forward on
+ arp-accept on
+ vrf vrf_myzone
+
+auto vrf_myzone
+iface vrf_myzone
+ vrf-table auto
+ post-up ip route add vrf vrf_myzone unreachable default metric 4278198272
+
+auto vrfbr_myzone
+iface vrfbr_myzone
+ bridge-ports vrfvx_myzone
+ bridge_stp off
+ bridge_fd 0
+ mtu 1450
+ vrf vrf_myzone
+
+auto vrfvx_myzone
+iface vrfvx_myzone
+ vxlan-id 1000
+ vxlan-local-tunnelip 192.168.0.1
+ bridge-learning off
+ bridge-arp-nd-suppress on
+ mtu 1450
+
+auto vxlan_myvnet
+iface vxlan_myvnet
+ vxlan-id 100
+ vxlan-local-tunnelip 192.168.0.1
+ bridge-learning off
+ bridge-arp-nd-suppress on
+ mtu 1450
diff --git a/src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/interfaces b/src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/interfaces
new file mode 100644
index 0000000..66bb826
--- /dev/null
+++ b/src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/interfaces
@@ -0,0 +1,7 @@
+auto vmbr0
+iface vmbr0 inet static
+ address 192.168.0.1/24
+ gateway 192.168.0.254
+ bridge-ports eth0
+ bridge-stp off
+ bridge-fd 0
diff --git a/src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/sdn_config b/src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/sdn_config
new file mode 100644
index 0000000..6f285ee
--- /dev/null
+++ b/src/test/zones/evpn/evpn_cluster_ibgp_uplink_ebgp/sdn_config
@@ -0,0 +1,51 @@
+{
+ version => 1,
+ zones => {
+ ids => {
+ myzone => {
+ ipam => "pve",
+ type => "evpn",
+ controller => "cluster",
+ 'vrf-vxlan' => 1000,
+ 'secondary-controllers' => ['uplink'],
+ }
+ },
+ },
+ vnets => {
+ ids => {
+ myvnet => {
+ tag => "100",
+ type => "vnet",
+ zone => "myzone"
+ },
+ },
+ },
+ subnets => {
+ ids => {
+ 'myzone-10.0.0.0-24' => {
+ 'type' => 'subnet',
+ 'vnet' => 'myvnet',
+ 'gateway' => '10.0.0.1',
+ }
+ }
+ },
+ controllers => {
+ ids => {
+ cluster => {
+ type => "evpn",
+ peers => '192.168.0.1,192.168.0.2,192.168.0.3',
+ asn => "65000",
+ 'bgp-mode' => 'internal',
+ },
+ uplink => {
+ type => "evpn",
+ peers => '198.51.100.1,198.51.100.2',
+ asn => "65000",
+ nodes => 'localhost',
+ 'bgp-mode' => 'external',
+ 'peer-group-name' => 'uplink',
+ }
+ },
+ }
+}
+
--
2.47.3
next prev parent reply other threads:[~2026-04-14 16:34 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-14 16:32 [RFC docs/manager/network/proxmox-ve-rs 00/16] Extend EVPN controller functionality Stefan Hanreich
2026-04-14 16:32 ` [PATCH proxmox-ve-rs 01/16] frr: add local-as setting Stefan Hanreich
2026-04-14 16:32 ` [PATCH proxmox-ve-rs 02/16] frr: add support for extcommunity lists Stefan Hanreich
2026-04-14 16:33 ` [PATCH proxmox-ve-rs 03/16] frr-templates: render local-as setting Stefan Hanreich
2026-04-14 16:33 ` [PATCH proxmox-ve-rs 04/16] frr-templates: render community lists in templates Stefan Hanreich
2026-04-14 16:33 ` [PATCH pve-network 05/16] evpn controller: make nodes configurable Stefan Hanreich
2026-04-14 16:33 ` [PATCH pve-network 06/16] evpn controller: allow multiple evpn controllers in a cluster Stefan Hanreich
2026-04-14 16:33 ` [PATCH pve-network 07/16] evpn controller: add bgp-mode setting Stefan Hanreich
2026-04-14 16:33 ` [PATCH pve-network 08/16] evpn zone: add secondary-controllers and rt filtering Stefan Hanreich
2026-04-14 16:33 ` [PATCH pve-network 09/16] evpn controller: add ebgp-multihop setting Stefan Hanreich
2026-04-14 16:33 ` Stefan Hanreich [this message]
2026-04-14 16:33 ` [PATCH pve-network 11/16] test: evpn: add legacy test Stefan Hanreich
2026-04-14 16:33 ` [PATCH pve-network 12/16] tests: evpn: force ibgp over ebgp bgp controller with ebgp wan session Stefan Hanreich
2026-04-14 16:33 ` [PATCH pve-network 13/16] tests: test route filtering mechanism with multiple zones/controllers Stefan Hanreich
2026-04-14 16:33 ` [PATCH pve-manager 14/16] sdn: evpn: zone: controller: add new advanced fields Stefan Hanreich
2026-04-14 16:33 ` [PATCH pve-docs 15/16] sdn: evpn: document new zone / controller options Stefan Hanreich
2026-04-14 16:33 ` [PATCH pve-docs 16/16] sdn: fix typo in bgp controller Stefan Hanreich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260414163315.419384-11-s.hanreich@proxmox.com \
--to=s.hanreich@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.